Practise 29 exam-style questions on Primes, factors, multiples, HCF and LCM for Edexcel GCSE Maths (Foundation calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
29 questions
1–5 marks each
Instant marking
No sign-up needed
20 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
Write down the factor of 42 that is between 10 and 20
Model answer
Factors of 42: 1, 2, 3, 6, 7, 14, 21, 42 The factor between 10 and 20 is 14.
Explanation
List the factors of 42 in pairs: 1 × 42, 2 × 21, 3 × 14, 6 × 7. The only one between 10 and 20 is 14. 21 is a factor but it is more than 20.
Mark scheme
1 mark
B1 for 14
cao
Question 2
2 marks
Find the lowest common multiple (LCM) of 8 and 12
Model answer
Multiples of 8: 8, 16, 24, 32, ... Multiples of 12: 12, 24, 36, ... The lowest number in both lists is 24.
Explanation
The lowest common multiple is the smallest number that is in both times tables. List multiples of each number until one appears in both lists. A common mistake is to multiply the numbers (8 × 12 = 96): this is a common multiple, but not the lowest one.
Mark scheme
1 mark
M1 for listing multiples of 8 and 12 (at least 3 correct for each), or for writing 8 = \(2^3\) and 12 = \(2^2 \times 3\)
1 mark
A1 for 24
cao; correct answer with no working scores full marks
Question 3
2 marks
Write down all the numbers that are factors of 36 and also multiples of 4
Model answer
Factors of 36: 1, 2, 3, 4, 6, 9, 12, 18, 36 Multiples of 4 in this list: 4, 12, 36
Explanation
List the factors of 36 first, then pick out the ones in the 4 times table. 4 is a multiple of itself, and 36 is a factor of itself, so both 4 and 36 count. 18 is not a multiple of 4.
Mark scheme
2 marks
B2 for 4, 12, 36 and no other numbers
B1 for two correct numbers and no more than one incorrect number
Question 4
4 marks
A rectangular floor is 2.4 m long and 1.8 m wide. It is to be covered with square tiles, all the same size. The tiles must not be cut.
Work out the side length of the largest square tile that can be used, and the number of these tiles needed.
Model answer
2.4 m = 240 cm and 1.8 m = 180 cm 240 = 2 × 2 × 2 × 2 × 3 × 5 180 = 2 × 2 × 3 × 3 × 5 HCF = 2 × 2 × 3 × 5 = 60 The largest tile has side 60 cm. Along the length: 240 ÷ 60 = 4 tiles Along the width: 180 ÷ 60 = 3 tiles Number of tiles = 4 × 3 = 12
Explanation
The side of the tile must divide exactly into both the length and the width, so it is a common factor; the largest tile uses the highest common factor. Change the lengths to centimetres so you are working with whole numbers. Then count how many tiles fit along each side and multiply.
Mark scheme
1 mark
P1 for working with the lengths in the same units, e.g. 240 cm and 180 cm (or 24 and 18)
correct answer with no working scores full marks
1 mark
P1 for a correct method to find the HCF, e.g. listing factors of 240 and 180 or writing 240 = \(2^4 \times 3 \times 5\) and 180 = \(2^2 \times 3^2 \times 5\)
1 mark
A1 for 60 cm
accept 0.6 m
1 mark
A1 for 12 tiles
ft (240 ÷ their side) × (180 ÷ their side) if their side is a common factor of 240 and 180
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.