Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Foundation non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/86

Plans and elevations

Practise 18 exam-style questions on Plans and elevations for AQA GCSE Maths (Foundation non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A cone stands on its circular base.

What shape is the front elevation of the cone?

Choose your answer.

  • circle
  • triangle
  • rectangle
  • semicircle

Model answer

The front elevation is the view from the front.
From the front, a cone looks like a triangle (an isosceles triangle).

Explanation

An elevation is the view from the front or the side, looking horizontally. From the side, a cone's sloping surface shows as two equal slanting lines meeting at the top, with the base as a straight line - an isosceles triangle. The plan of a cone (from above) is a circle.

Mark scheme
  1. 1 mark

    B1 for triangle

Question 2

2 marks

The diagram shows a cuboid.

Ben says, "The side elevation of this cuboid is a square."

Is Ben correct?
Give a reason for your answer.

A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 7 cm (along the front bottom edge). The width (the edge going back) is labelled 3 cm (along the bottom edge going back on the right). The height is labelled 3 cm (along the front left vertical edge). The diagram is labelled "Not drawn accurately".

Model answer

Yes.
The side elevation is the view from the side.
From the side you see the width (3 cm) and the height (3 cm).
3 cm by 3 cm is a square.

Explanation

From the side you cannot see the 7 cm length, which goes away from you. You see a rectangle made from the width and the height. Here both are 3 cm, so the side elevation is a square. The front elevation would be a 7 cm by 3 cm rectangle.

Mark scheme
  1. 1 mark

    B1 for Yes

  2. 1 mark

    B1dep for the side elevation is 3 cm by 3 cm (all sides equal)

    accept the width and the height are both 3 cm

Question 3

3 marks

The diagram shows a triangular prism.
The front of the prism is a triangle.

Work out the area of the front elevation and the area of the side elevation of the prism.

A triangular prism drawn in 3D with hidden edges shown as dashed lines. Its end is an isosceles triangle. The base of the triangle is labelled 6 cm (along the bottom edge of the front triangle). The height of the triangle is labelled 4 cm (on a dashed line from the top vertex of the front triangle down to its base, at right angles to the base). The length of the prism is labelled 10 cm (along the bottom edge going back from the front triangle). The diagram is labelled "Not drawn accurately".

Model answer

Front elevation: the triangle, base 6 cm and height 4 cm.
Area = ½ × 6 × 4 = 12 cm²
Side elevation: from the side you see a rectangle as long as the prism (10 cm) and as high as the triangle (4 cm).
Area = 10 × 4 = 40 cm²

Explanation

From the front you see the triangular face exactly as it is. From the side you see the full length of the prism, and the height of the side view is the height of the triangle, because the top edge of the prism is 4 cm above the ground all the way along.

Mark scheme
  1. 1 mark

    M1 for ½ × 6 × 4

  2. 1 mark

    A1 for front elevation 12 cm²

  3. 1 mark

    B1 for side elevation 40 cm²

    from 10 × 4; correct answers with no working score full marks

Question 4

4 marks

Here is the plan of a solid made from centimetre cubes.
The numbers show how many cubes are in each stack.
The front of the solid is at the bottom of the plan.
The side elevation is the view from the right-hand side.

Work out the area of the front elevation and the area of the side elevation.

Drawings of a solid made from cubes, on squared paper. Cubes in each stack, as seen from above (back row first, each row left to right): [1, 2, 1], [3, 1, 4], [2, 1, 1]. They are its plan, drawn on squared paper. Plan (looking down, back row at the top): ■■■ / ■■■ / ■■■, 9 squares, each square showing the number of cubes in its stack.

Model answer

Front elevation: tallest stack in each column.
Left column: 1, 3, 2, tallest 3
Middle column: 2, 1, 1, tallest 2
Right column: 1, 4, 1, tallest 4
Area = 3 + 2 + 4 = 9 cm²
Side elevation: tallest stack in each row.
Back row: 1, 2, 1, tallest 2
Middle row: 3, 1, 4, tallest 4
Front row: 2, 1, 1, tallest 2
Area = 2 + 4 + 2 = 8 cm²

Explanation

From the front, you see each column of stacks as one column of squares, as tall as its tallest stack. From the side, you see each row of stacks as one column of squares, as tall as the tallest stack in that row. Each square is 1 cm by 1 cm, so it has an area of 1 cm².

Mark scheme
  1. 1 mark

    M1 for front elevation columns of 3, 2 and 4

    the tallest stack in each column, left to right

  2. 1 mark

    A1 for front elevation 9 cm²

  3. 1 mark

    M1 for side elevation columns of 2, 4 and 2

    the tallest stack in each row

  4. 1 mark

    A1 for side elevation 8 cm²

    correct answers with no working score full marks; 16 (the volume) scores 0

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.