Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Foundation non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/86

Areas and volumes of prisms

Practise 36 exam-style questions on Areas and volumes of prisms for AQA GCSE Maths (Foundation non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 36 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A prism has a cross-section with an area of 15 cm².
The prism is 7 cm long.

Work out the volume of the prism.

Model answer

Volume = area of cross-section × length
= 15 × 7
= 105 cm³

Explanation

The volume of any prism is the area of its cross-section multiplied by its length. The cross-section is the same shape all the way through, so you stack up 7 layers of 15 cm³. Volume is measured in cubic units, cm³.

Mark scheme
  1. 1 mark

    B1 for 105 cm³

Question 2

2 marks

A parallelogram has an area of 56 cm².
Its perpendicular height is 7 cm.

Work out the length of the base of the parallelogram.

Model answer

Area = base × perpendicular height
b × 7 = 56
b = 56 ÷ 7 = 8 cm

Explanation

The area of a parallelogram is base × perpendicular height, with no half. So to find the base, divide the area by the height. Check: 8 × 7 = 56.

Mark scheme
  1. 1 mark

    M1 for 56 ÷ 7 or b × 7 = 56

  2. 1 mark

    A1 for 8 cm

    correct answer with no working scores full marks

Question 3

3 marks

The diagram shows a fish tank in the shape of a cuboid.

1 litre = 1000 cm³

How many litres of water does the tank hold when it is full?

A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 50 cm (along the front bottom edge). The width (the edge going back) is labelled 30 cm (along the bottom edge going back on the right). The height is labelled 40 cm (along the front left vertical edge). The diagram is labelled "Not drawn accurately".

Model answer

Volume = 50 × 30 × 40 = 60 000 cm³
60 000 ÷ 1000 = 60 litres

Explanation

Work out the volume in cm³ by multiplying the length, width and height: 5 × 3 × 4 = 60, and there are three zeros. Then divide by 1000 to change cm³ into litres.

Mark scheme
  1. 1 mark

    M1 for 50 × 30 × 40

  2. 1 mark

    M1 for their 60 000 ÷ 1000

  3. 1 mark

    A1 for 60 (litres)

    correct answer with no working scores full marks

Question 4

4 marks

Container A is a cuboid 10 cm long, 10 cm wide and 12 cm high.
Container B is a cylinder with radius 5 cm and height 15 cm.

Which container holds more water?
By how much?
Use π = 3

Model answer

Container A: 10 × 10 × 12 = 1200 cm³
Container B: 3 × 5² × 15 = 3 × 25 × 15 = 1125 cm³
1200 − 1125 = 75
Container A holds 75 cm³ more.

Explanation

Work out both volumes in the same units. For the cylinder, square the radius first, then multiply by π (here 3) and by the height. Then subtract to find the difference.

Mark scheme
  1. 1 mark

    M1 for 10 × 10 × 12 (= 1200)

  2. 1 mark

    M1 for 3 × 5² × 15 (= 1125)

  3. 1 mark

    A1 for 1200 and 1125

  4. 1 mark

    A1 for container A by 75 cm³

    accept 'the cuboid'; correct answer with no working scores full marks

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.