Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Foundation non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/86

Comparing lengths, areas and volumes with ratio

Practise 28 exam-style questions on Comparing lengths, areas and volumes with ratio for AQA GCSE Maths (Foundation non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 28 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A model boat is made using a scale of 1 : 20
The model is 30 cm long.

Work out the length of the real boat in centimetres.

Model answer

1 : 20 means every length on the real boat is 20 times the length on the model.
30 × 20 = 600 cm

Explanation

A scale of 1 : 20 means 1 cm on the model stands for 20 cm on the real boat, so the scale factor from the model to the real boat is 20. Multiply the model length by 20. Dividing by 20 would make the real boat smaller than the model.

Mark scheme
  1. 1 mark

    B1 for 600 (cm)

Question 2

2 marks

A model car is made using a scale of 1 : 40
The model car is 11 cm long.

Work out the length of the real car.
Give your answer in metres.

Model answer

Real length = 11 × 40 = 440 cm
440 cm = 440 ÷ 100 = 4.4 m

Explanation

The scale 1 : 40 means the real car is 40 times as long as the model. Multiply 11 cm by 40 to get the real length in cm, then divide by 100 to change centimetres into metres.

Mark scheme
  1. 1 mark

    M1 for 11 × 40 (= 440)

  2. 1 mark

    A1 for 4.4 (m)

    440 (cm) with no conversion scores M1 A0; correct answer with no working scores full marks

Question 3

3 marks

Cylinder A has radius 3 cm and height 8 cm.
Cylinder B has radius 6 cm and height 4 cm.

Write the ratio volume of A : volume of B in its simplest form.

Model answer

Volume of A = \(\pi \times 3^2 \times 8 = 72\pi\) cm³
Volume of B = \(\pi \times 6^2 \times 4 = 144\pi\) cm³
\(72\pi : 144\pi\) = 72 : 144 = 1 : 2

Explanation

Volume of a cylinder = \(\pi r^2 h\). Leave the volumes in terms of \(\pi\): the \(\pi\)s cancel when you simplify the ratio. These cylinders are not enlargements of each other (the radius doubles but the height halves), so you must work out each volume.

Mark scheme
  1. 1 mark

    M1 for \(\pi \times 3^2 \times 8\) (= \(72\pi\))

    or 72 without π

  2. 1 mark

    M1 for \(\pi \times 6^2 \times 4\) (= \(144\pi\))

    or 144 without π

  3. 1 mark

    A1 for 1 : 2

    correct answer with no working scores full marks

Question 4

4 marks

The diagram shows a box in the shape of a cuboid.
A larger box is an enlargement of this box with scale factor 2

Sam says,
"The volume of the larger box is twice the volume of the smaller box."

Is Sam correct?
You must show your working.

A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 10 cm (along the front bottom edge). The width (the edge going back) is labelled 4 cm (along the bottom edge going back on the right). The height is labelled 6 cm (along the front left vertical edge). The diagram is labelled "Not drawn accurately".

Model answer

Smaller box: 10 × 4 × 6 = 240 cm³
Larger box: 20 cm by 8 cm by 12 cm
20 × 8 × 12 = 1920 cm³
1920 ÷ 240 = 8
No, Sam is not correct. The larger box has 8 times the volume (ratio 1 : 8), not twice.

Explanation

In an enlargement, every length is multiplied by the scale factor, so the larger box is 20 cm by 8 cm by 12 cm. Work out both volumes and compare them. The length, width and height are all doubled, so the volume is multiplied by 2 × 2 × 2 = 8.

Mark scheme
  1. 1 mark

    M1 for 10 × 4 × 6 (= 240)

  2. 1 mark

    M1 for the dimensions of the larger box, 20 cm, 8 cm and 12 cm

  3. 1 mark

    M1dep for 20 × 8 × 12 (= 1920)

  4. 1 mark

    A1 for No with 240 and 1920 (the larger volume is 8 times as big, or the ratio is 1 : 8)

    answer only scores 0

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.