Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Maths (Foundation non-calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/86

Substituting into formulae and expressions

Practise 28 exam-style questions on Substituting into formulae and expressions for Edexcel GCSE Maths (Foundation non-calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 28 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Work out the value of \(4c - 7\) when \(c = 5\)

Model answer

\(4c - 7 = 4 \times 5 - 7 = 20 - 7 = 13\)

Explanation

\(4c\) means \(4 \times c\). Replace \(c\) with 5, then follow the order of operations: multiply first (\(4 \times 5 = 20\)), then subtract 7.

Mark scheme
  1. 1 mark

    B1 for 13

    cao

Question 2

2 marks

Ella is asked to work out the value of \(10 - 3y\) when \(y = -2\)

Here is her working.

\(10 - 3 \times -2 = 10 - 6 = 4\)

Ella's answer is wrong.
What mistake has she made, and what is the correct answer?

Model answer

\(3y = 3 \times (-2) = -6\)
\(10 - 3y = 10 - (-6) = 10 + 6 = 16\)
Ella treated \(3 \times -2\) as \(+6\) and then subtracted it. Subtracting −6 is the same as adding 6, so the answer is 16.

Explanation

When a negative value is substituted, keep it in a bracket: \(10 - 3 \times (-2)\). Then \(3 \times (-2) = -6\), and subtracting a negative number is the same as adding. Ella's answer of 4 comes from losing the negative sign.

Mark scheme
  1. 1 mark

    B1 for explaining the mistake, e.g. "\(-3 \times -2\) is \(+6\), not \(-6\)" or "she should have added 6, not subtracted 6"

    correct values with no working score the calculation marks

  2. 1 mark

    B1 for 16

    cao

Question 3

2 marks

The diagram shows a trapezium.

The area, \(A\), of a trapezium is given by the formula

\(A = \frac{1}{2}(a + b)h\)

where \(a\) and \(b\) are the lengths of the parallel sides and \(h\) is the perpendicular height.

Work out the area of the trapezium.

Geometry diagram, marked "Diagram NOT accurately drawn". Trapezium ABCD. A dashed line is drawn from D going downwards. The angle at an unlabelled point between the lines to D and B is marked as a right angle (90°). Side DC is labelled 5 cm. Side AB is labelled 9 cm. The line going downwards from D is labelled 4 cm. DC and AB are each marked with an arrowhead (parallel lines).

Model answer

\(A = \frac{1}{2} \times (5 + 9) \times 4\)
\(A = \frac{1}{2} \times 14 \times 4\)
\(A = 7 \times 4 = 28\) cm²

Explanation

Add the two parallel sides first (the bracket), then multiply by the height and halve. The sloping sides are not used. Substituting the sloping side instead of the perpendicular height is a common mistake.

Mark scheme
  1. 1 mark

    M1 for \(\frac{1}{2} \times (5 + 9) \times 4\)

  2. 1 mark

    A1 for 28 (cm²)

    cao; correct answer with no working scores full marks

Question 4

3 marks

The diagram shows a cylinder full of water.
The cylinder has radius 4 cm and height 5 cm.

The volume, \(V\), of a cylinder is given by the formula \(V = \pi r^2h\)
Use \(\pi = 3\)

All the water is poured into cups.
Each cup holds 30 cm³.

How many cups can be filled?

A cylinder drawn in 3D (hidden edges dashed). The radius is labelled 4 cm (on a line from the centre of the flat top face to its edge). The height is labelled 5 cm (beside the vertical side of the cylinder). The diagram is labelled "Diagram NOT accurately drawn".

Model answer

\(V = \pi r^2h\)
\(V = 3 \times 4^2 \times 5\)
\(V = 3 \times 16 \times 5 = 240\) cm³
Number of cups = \(240 \div 30 = 8\)

Explanation

Substitute \(r = 4\), \(h = 5\) and \(\pi = 3\) into the formula. Square the radius first (\(4^2 = 16\)), then multiply. Divide the volume of water by the amount one cup holds. Squaring 4 is often done wrongly as \(4 \times 2 = 8\).

Mark scheme
  1. 1 mark

    M1 for \(3 \times 4^2 \times 5\) or \(3 \times 16 \times 5\)

    correct answer with no working scores full marks

  2. 1 mark

    A1 for 240 (cm³)

    using \(\pi = 3\) as instructed; with the exact value of \(\pi\) the volume is \(80\pi\) ≈ 251 cm³, which also gives 8 full cups

  3. 1 mark

    B1 for 8 (cups)

    ft their volume ÷ 30

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.