Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 6
The rate and extent of chemical change
Unit 7
Organic chemistry
Unit 8
Chemical analysis
Unit 9
Chemistry of the atmosphere
Unit 10
Using resources
Avg
score:
–
Topics
done:
0/38

Test for carbon dioxide

Practise 9 exam-style questions on Test for carbon dioxide for AQA GCSE Combined Science (Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 9 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
9 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Describe the test for carbon dioxide.

Give the result you would see if the gas is carbon dioxide.

Model answer

Bubble the gas through limewater (or shake it with limewater). If the gas is carbon dioxide, the limewater turns milky (cloudy).

Explanation

Limewater starts clear and colourless. Carbon dioxide reacts with it to make tiny particles of an insoluble solid, which make the solution look milky or cloudy. Saying the limewater 'turns white' is not precise enough: the key word is milky or cloudy.

Mark scheme
  1. 1 mark

    bubble the gas through limewater / shake the gas with limewater

    allow calcium hydroxide solution for limewater

  2. 1 mark

    the limewater turns milky / cloudy

    allow a white precipitate forms; do not accept 'turns white' alone or 'turns colourless'

Question 2

2 marks

A student heats baking powder in a boiling tube. A delivery tube carries the gas produced into a test tube of limewater, and the limewater turns milky.

The teacher tells the student to take the delivery tube out of the limewater before she stops heating.

Explain why.

Model answer

When the student stops heating, the gas inside the boiling tube cools and contracts, so its pressure falls. Limewater would then be sucked back up the delivery tube into the hot boiling tube, and the cold liquid could make the hot glass crack.

Explanation

This is called suck-back. Cooling gas particles move more slowly, so the pressure inside the tube drops below the pressure outside, and air pressure pushes the limewater back up the delivery tube. Removing the delivery tube from the limewater first stops this happening.

Mark scheme
  1. 1 mark

    when heating stops the gas in the boiling tube cools and contracts / its pressure falls

    allow the gas takes up less volume

  2. 1 mark

    so limewater is sucked back into the hot boiling tube, which could crack it

    allow suck-back; allow the boiling tube could shatter / break

Question 3

3 marks

A student breathed out through a straw into 10 cm³ of limewater and timed how long the limewater took to turn milky. She did this three times at rest and three times straight after exercise. The table shows her results.

She concluded that she breathed out more carbon dioxide each second after exercise than at rest.

Explain how the results support her conclusion.
Give one variable she should have controlled to make the comparison fair.

Table with columns "When tested", "Trial 1 in s", "Trial 2 in s", "Trial 3 in s", "Mean in s". When tested: At rest; Trial 1 in s: 48; Trial 2 in s: 52; Trial 3 in s: 50; Mean in s: 50 | When tested: After exercise; Trial 1 in s: 24; Trial 2 in s: 37; Trial 3 in s: 26; Mean in s: 25.

Model answer

The mean time for the limewater to turn milky after exercise was 25 s, which is half the mean time at rest (50 s). A shorter time means that more carbon dioxide was bubbling into the limewater each second, so enough calcium carbonate formed sooner to make the limewater milky. She should have used the same concentration of limewater each time (and breathed out at the same rate), so that only the amount of carbon dioxide in her breath affected the time.

Explanation

The limewater test can be made roughly quantitative: the more carbon dioxide passes through the limewater each second, the sooner it turns milky. For this to be a fair comparison, everything else that affects the time, such as the volume and concentration of limewater and how hard she blows, must be kept the same.

Mark scheme
  1. 1 mark

    the mean time for the limewater to turn milky was shorter after exercise (25 s) than at rest (50 s)

    allow half the time; must compare the two times

  2. 1 mark

    more carbon dioxide passes into the limewater each second, so enough (insoluble) calcium carbonate / precipitate forms sooner to make it milky

    allow more carbon dioxide reacts with the limewater in a given time

  3. 1 mark

    control: the volume / concentration of limewater, or the rate / depth of breathing out, or the size of straw

    allow the same judgement of when the limewater is milky, e.g. a cross under the tube; ignore 'same person'

Question 4

4 marks

A student has two gas jars. One contains carbon dioxide and the other contains oxygen, but the jars are not labelled.

Describe two different tests the student could do to find out which gas is which. Give the result of each test for both gases.

Model answer

Test 1: add some limewater to each gas jar and shake. The gas that turns the limewater milky is carbon dioxide; with oxygen the limewater stays clear.
Test 2: put a glowing splint into each gas jar. The gas that relights the glowing splint is oxygen; in carbon dioxide the glowing splint goes out.

Explanation

Using two tests gives a check: each gas should give a positive result in its own test and a negative result in the other. Carbon dioxide does not support combustion, so a glowing splint goes out in it, while oxygen makes it relight.

Mark scheme
  1. 1 mark

    test 1: shake / bubble each gas with limewater

  2. 1 mark

    carbon dioxide turns the limewater milky / cloudy; oxygen leaves it clear / no change

    both results needed

  3. 1 mark

    test 2: put a glowing splint into each gas

    do not accept a lit splint

  4. 1 mark

    oxygen relights the glowing splint; in carbon dioxide the splint goes out

    both results needed

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Test for carbon dioxide

The big idea

The test for carbon dioxide uses limewater, which is an aqueous solution of calcium hydroxide, Ca(OH)₂(aq). When carbon dioxide is bubbled through or shaken with limewater, the limewater turns milky (cloudy). It is the only test for carbon dioxide you need, and it turns up in many other topics.

The test

  1. Bubble the gas through limewater using a delivery tube, or shake the gas with a little limewater in a stoppered test tube.
  2. If the limewater turns milky (cloudy), the gas is carbon dioxide.

Why it turns milky: carbon dioxide reacts with the dissolved calcium hydroxide to form calcium carbonate, which is insoluble. The tiny particles of this white precipitate make the limewater look milky.

Ca(OH)₂(aq) + CO₂(g) → CaCO₃(s) + H₂O(l)

Do not confuse the names: limewater is calcium hydroxide solution, lime is calcium oxide, and limestone is calcium carbonate.

Where carbon dioxide comes from

  • acids reacting with carbonates (the mixture fizzes);
  • thermal decomposition of carbonates, such as CaCO₃ → CaO + CO₂;
  • burning fuels that contain carbon;
  • respiration, and fermentation of sugar by yeast.

When you heat a carbonate with a delivery tube dipping into limewater, lift the tube out of the limewater before you stop heating, or cold limewater can be sucked back into the hot tube and crack it.

Why not use a burning splint?

TestCarbon dioxideNitrogen
Burning splintGoes outGoes out
LimewaterTurns milkyStays clear

Lots of gases put out a flame, so a splint going out proves nothing. Only carbon dioxide turns limewater milky.

How much carbon dioxide? The faster the limewater turns milky, the more carbon dioxide the gas contains. Breathed-out air turns limewater milky within seconds. Ordinary air contains about 0.04% carbon dioxide, which is too little to turn limewater milky quickly, but that does not mean it has none.

Common mistakes

  • Writing "turns white" or "goes clear". The accepted result is milky or cloudy.
  • Using a burning splint as the test. It only shows the gas does not support burning.
  • Calling limewater calcium oxide or calcium carbonate. It is calcium hydroxide solution.
  • Saying inhaled air contains no carbon dioxide because limewater stayed clear. It contains a very small amount.

Exam tip

For two marks, name the reagent and the result: "bubble the gas through limewater; the limewater turns milky". If you are asked why it turns milky, say that an insoluble solid, calcium carbonate, forms.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.