Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 6
The rate and extent of chemical change
Unit 7
Organic chemistry
Unit 8
Chemical analysis
Unit 9
Chemistry of the atmosphere
Unit 10
Using resources
Avg
score:
–
Topics
done:
0/38

Reversible reactions

Practise 9 exam-style questions on Reversible reactions for AQA GCSE Combined Science (Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 9 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
9 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Solid ammonium chloride, NH₄Cl, decomposes when it is heated to form two gases, ammonia (NH₃) and hydrogen chloride (HCl). When the gases cool down they react together to form ammonium chloride again.

Write a balanced symbol equation for this reversible reaction. Include state symbols.

Model answer

NH₄Cl(s) ⇌ NH₃(g) + HCl(g)

Explanation

The equation is already balanced: one NH₄Cl contains one N, four H and one Cl, the same as NH₃ + HCl. The ⇌ symbol shows that the reaction can go in either direction depending on the conditions: heating decomposes ammonium chloride and cooling re-forms it.

Mark scheme
  1. 1 mark

    NH₄Cl ⇌ NH₃ + HCl

    must use the ⇌ symbol; allow the equation written in the reverse direction

  2. 1 mark

    state symbols: NH₄Cl(s) ⇌ NH₃(g) + HCl(g)

    allow ecf for state symbols on a correct set of formulae

Question 2

2 marks

Which one of these reactions is reversible?

- burning magnesium in air
- heating ammonium chloride
- reacting sodium with water

Give a reason for your answer.

Model answer

Heating ammonium chloride is reversible, because the products, ammonia and hydrogen chloride, react to form ammonium chloride again when they are cooled.

Explanation

A reaction is reversible only if the products can react to produce the original reactants. The magnesium oxide or sodium hydroxide and hydrogen formed in the other reactions cannot easily be turned back into the starting substances.

Mark scheme
  1. 1 mark

    heating ammonium chloride

  2. 1 mark

    the products (ammonia and hydrogen chloride) can react to form ammonium chloride again (when cooled)

    allow the reaction can go in both directions

Question 3

3 marks

A student heated some white ammonium chloride at the bottom of a test tube. The solid at the bottom of the tube slowly disappeared. A white solid formed near the top of the tube, where it was cooler.

NH₄Cl(s) ⇌ NH₃(g) + HCl(g)

Explain these observations.

Model answer

When the ammonium chloride is heated it decomposes into ammonia and hydrogen chloride, which are gases, so the solid disappears from the bottom of the tube. The gases move up to the cooler part of the tube. There, the reverse reaction happens: ammonia and hydrogen chloride react together to form solid ammonium chloride again.

Explanation

This is the classic example of a reversible reaction whose direction is changed by changing the conditions. Heating favours the decomposition (forward reaction) and cooling favours the formation of ammonium chloride (reverse reaction).

Mark scheme
  1. 1 mark

    heating makes the ammonium chloride decompose into (ammonia and hydrogen chloride) gases

    allow the forward reaction happens at the bottom of the tube

  2. 1 mark

    the gases rise / move up the tube to the cooler part

  3. 1 mark

    where they cool and react to form ammonium chloride again

    allow the reverse reaction happens at the top of the tube

Question 4

3 marks

Ammonium chloride decomposes when it is heated:

NH₄Cl(s) ⇌ NH₃(g) + HCl(g)

Relative atomic masses (Ar): H = 1, N = 14, Cl = 35.5

Calculate the mass of ammonia produced when 10.7 g of ammonium chloride decomposes completely.

Model answer

Mr of NH₄Cl = 14 + (4 × 1) + 35.5 = 53.5
Mr of NH₃ = 14 + (3 × 1) = 17
Moles of NH₄Cl = 10.7 ÷ 53.5 = 0.20 mol
1 mol NH₄Cl gives 1 mol NH₃, so moles of NH₃ = 0.20 mol
Mass of NH₃ = 0.20 × 17 = 3.4 g

Explanation

The equation shows a 1 : 1 ratio between ammonium chloride and ammonia, so the moles of ammonia equal the moles of ammonium chloride. Multiplying moles by Mr gives the mass. In practice the gases recombine when they cool, which is why the reaction must be kept hot to decompose all of the solid.

Mark scheme
  1. 1 mark

    Mr of NH₄Cl = 53.5 and Mr of NH₃ = 17

    an answer of 3.4 (g) scores 3 marks

  2. 1 mark

    moles of NH₄Cl = 10.7 ÷ 53.5 = 0.20 (mol)

    allow ecf from an incorrect Mr

  3. 1 mark

    mass of NH₃ = 0.20 × 17 = 3.4 (g)

    allow ecf; allow (17 ÷ 53.5) × 10.7 = 3.4 (g)

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Reversible reactions

The big idea

In most reactions the products cannot turn back into the reactants. In a reversible reaction, the products can react to produce the original reactants. Reversible reactions are shown with the symbol ⇌, and changing the conditions can change which way the reaction goes.

Forward and reverse reactions

A general reversible reaction is written

A + B ⇌ C + D

  • The forward reaction goes from left to right: A and B react to form C and D.
  • The reverse reaction goes from right to left: C and D react to re-form A and B.

So the substances on the right are the reactants of the reverse reaction, and the substances on the left are its products.

Changing the direction

Changing the conditions, such as the temperature, can change which direction a reversible reaction goes in. Heating ammonium chloride is the classic example:

ammonium chloride ⇌ ammonia + hydrogen chloride

NH₄Cl(s) ⇌ NH₃(g) + HCl(g)

  • Heating drives the forward reaction: the white solid decomposes into two colourless gases.
  • Cooling drives the reverse reaction: the gases react to re-form the white solid.

Heat a little ammonium chloride at the bottom of a test tube and the white solid disappears from the hot end. Then a white solid appears again near the cool top of the tube, where the ammonia and hydrogen chloride meet and react.

For other reversible reactions, changing the amount of one substance, or the pressure of reacting gases, can change the direction. If a gaseous product escapes from an open container, it cannot take part in the reverse reaction.

Remember

  • ⇌ means the reaction is reversible.
  • Forward reaction: left to right. Reverse reaction: right to left.
  • Heating ammonium chloride decomposes it; cooling the gases re-forms it.

Common mistakes

  • Calling the ammonium chloride change physical, like melting. New substances (ammonia and hydrogen chloride) form, so it is a chemical reaction.
  • Defining a reversible reaction only as "a reaction that goes both ways". Say that the products can react to produce the original reactants.
  • Using → for a reversible reaction. Use ⇌.

Exam tip

Questions often give an unfamiliar reversible reaction with colours or states. For each observation, say which substance is forming, whether that is the forward or the reverse reaction, and which condition (such as heating or cooling) caused it.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.