Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Combined Science (Chemistry Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 6
The rate and extent of chemical change
Unit 7
Organic chemistry
Unit 8
Chemical analysis
Unit 9
Chemistry of the atmosphere
Unit 10
Using resources
Avg
score:
–
Topics
done:
0/38

Collision theory and activation energy

Practise 16 exam-style questions on Collision theory and activation energy for AQA GCSE Combined Science (Chemistry Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

According to collision theory, two conditions must be met for reacting particles to react.

Give the two conditions.

Model answer

The reacting particles must collide with each other, and the collision must have at least the activation energy (enough energy to react).

Explanation

Collision theory says chemical reactions only happen when particles collide with sufficient energy. Many collisions do not have enough energy, so the particles just bounce apart without reacting.

Mark scheme
  1. 1 mark

    the particles must collide (with each other)

  2. 1 mark

    with sufficient energy / with energy equal to or greater than the activation energy

    allow with enough energy; do not accept 'with energy' alone

Question 2

3 marks

Magnesium ribbon reacts with dilute hydrochloric acid.

Explain why the reaction is faster when the concentration of the acid is increased.

Model answer

In a more concentrated acid there are more acid particles in the same volume. This means that the acid particles collide with the magnesium more frequently, so there are more successful collisions per second and the rate of reaction increases.

Explanation

Concentration affects how often particles collide, not how much energy they have. Always say more frequent collisions (or more collisions per second): just saying more collisions is not enough, because a slow reaction also has many collisions over a long time.

Mark scheme
  1. 1 mark

    there are more acid particles in the same volume

    allow particles are closer together; do not accept there are more particles (without reference to volume)

  2. 1 mark

    so the particles collide more frequently

    allow more collisions per second; do not accept more collisions (without reference to time)

  3. 1 mark

    so there are more successful collisions per second

    allow more collisions with energy greater than the activation energy per second

Question 3

3 marks

For many reactions, a 10 °C rise in temperature increases the frequency of collisions by only about 2%, but the rate of reaction roughly doubles.

Explain why the rate increases so much more than the frequency of collisions.

Model answer

Increasing the temperature makes the particles move faster, so collisions are slightly more frequent, but the collisions are also more energetic. A much larger proportion of the particles now have energy equal to or greater than the activation energy, so a much larger fraction of the collisions are successful. The number of successful collisions per second roughly doubles even though the total number of collisions hardly changes.

Explanation

Temperature affects rate in two ways. The increase in collision frequency is small, so the main reason the rate rises is that many more collisions have at least the activation energy and therefore lead to a reaction.

Mark scheme
  1. 1 mark

    at the higher temperature, collisions are more energetic / particles have more energy

  2. 1 mark

    a much larger proportion of particles / collisions have energy equal to or greater than the activation energy

    allow many more collisions have enough energy to react

  3. 1 mark

    so the number of successful collisions per second increases far more than the total number of collisions

    allow most of the increase in rate is due to the energy of collisions, not their frequency

Question 4

4 marks

A student found that when the concentration of sodium thiosulfate solution was halved, the time taken for a cross to disappear doubled.

Explain this result in terms of particles and collisions.

Model answer

Halving the concentration means there are half as many thiosulfate particles in the same volume of solution. The particles therefore collide half as often, so there are half as many successful collisions per second and the rate of reaction halves. The cross disappears when a fixed amount of sulfur has formed, so at half the rate this takes twice as long.

Explanation

The rate of collisions is proportional to the number of particles in a given volume, so rate is proportional to concentration here. Because the time is measured to reach a fixed amount of product, time and rate are inversely related: half the rate, twice the time.

Mark scheme
  1. 1 mark

    halving the concentration halves the number of (thiosulfate) particles in the same volume

  2. 1 mark

    so the frequency of collisions is halved

    allow half as many collisions per second / half as many successful collisions per second

  3. 1 mark

    so the rate of reaction halves

    allow rate is (directly) proportional to concentration

  4. 1 mark

    so it takes twice as long to produce the same amount of sulfur / to make the cross disappear

    allow the time is inversely proportional to the rate

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Collision theory and activation energy

The big idea

Collision theory says that a chemical reaction can only happen when reacting particles collide with each other with sufficient energy. The minimum energy they need is the activation energy. Anything that makes these successful collisions happen more often makes the reaction faster, and this one idea explains every factor that affects the rate.

Collisions and activation energy

  • Particles must collide to react.
  • The collision must have energy equal to or greater than the activation energy. If it has less, the particles just bounce apart.
  • A collision that leads to a reaction is a successful collision.
  • The rate of reaction depends on the number of successful collisions per second.

The activation energy is the minimum amount of energy that particles must have to react. On a reaction profile it is the height from the reactants up to the top of the curve: an energy barrier that colliding particles must get over.

Reaction profile (energy against progress of reaction). The reactants (Reactants) are higher in energy than the products (Products); the curve rises to a peak between them. An upward arrow from the reactants' level to the top of the peak is labelled "Activation energy".
Only collisions with at least the activation energy get over the barrier and form products.

Explaining the factors

ChangeWhat happens to the particlesEffect on collisions
Higher concentration of a solutionMore reactant particles in the same volumeMore frequent collisions
Higher pressure of a gasThe same number of gas particles in a smaller volumeMore frequent collisions
Larger surface area of a solidMore particles of the solid are exposed to the other reactantMore frequent collisions
Higher temperatureParticles move faster, with more energyCollisions are more frequent and more energetic, so a greater proportion have at least the activation energy

Concentration, pressure and surface area change only how often particles collide. The particles have the same energy as before, so the same proportion of collisions succeed; there are just more of them each second.

Temperature is different: it changes both the frequency and the energy of collisions, and the energy effect matters more. Warming a reaction by 10 °C makes collisions only slightly more frequent, yet it can roughly double the rate, because many more collisions now have enough energy.

The same ideas explain why a reaction slows down as it goes on. Reactants are used up, so there are fewer reactant particles in the same volume and collisions become less frequent.

Surface area to volume ratio

Breaking a solid into smaller pieces does not change its total mass or volume, but it exposes particles that were hidden inside, so the surface area to volume ratio increases. Only particles on the surface can be hit by particles of the other reactant. For a cube with sides of length \(L\), the ratio is \(\dfrac{6L^2}{L^3} = \dfrac{6}{L}\), so halving the side doubles the ratio.

Cutting a block in half

A block of marble measures 4 cm × 2 cm × 1 cm. It is cut into two blocks, each 2 cm × 2 cm × 1 cm. Calculate the surface area to volume ratio before and after the cut. How much faster will the marble react with acid at the start?

Before: surface area \(= 2 \times (8 + 4 + 2) = 28\) cm², volume \(= 8\) cm³, so the ratio is \(28 : 8 = 3.5 : 1\)

After: each block has surface area \(= 2 \times (4 + 2 + 2) = 16\) cm², so the total is 32 cm². The total volume is still 8 cm³, so the ratio is \(32 : 8 = 4 : 1\)

The total surface area is \(\dfrac{32}{28} \approx 1.14\) times bigger, so acid particles collide with the marble about 1.14 times as often: the initial rate rises by about 14%. One cut helps only a little; grinding the marble to a powder would increase the surface area enormously.

Simple proportionality

The frequency of collisions is proportional to the number of reactant particles in a given volume. So, as a simple model:

  • doubling the concentration (or the pressure of a gas) roughly doubles the rate, and halving it roughly halves the rate;
  • three times the surface area gives roughly three times as many collisions per second.

Temperature does not follow this simple pattern. The rate rises much faster than the temperature, because a higher temperature also makes many more of the collisions energetic enough to react.

Common mistakes

  • Writing "more collisions". Say more frequent collisions or more collisions per second: a slow reaction also has lots of collisions if you wait long enough.
  • Saying that a higher concentration gives the particles more energy. Only temperature changes the energy of the particles.
  • Defining activation energy without the word minimum.
  • Explaining temperature only by "the particles collide more often". You must also say the collisions are more energetic, so more of them have at least the activation energy.
  • Saying a powder has "more particles". It has the same number of particles; more of them are exposed on the surface.

Exam tip

"Explain using collision theory" answers score by linking three steps: what happens to the particles (more in the same volume, more exposed, or more energy), what that does to the collisions (more frequent, or more energetic), and the result (more successful collisions per second, so a faster rate).

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.