Practise 11 exam-style questions on Timbers and ceramics for AQA GCSE Engineering. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
11 questions
1–8 marks each
Instant marking
No sign-up needed
11 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
1 mark
Which one of the following materials is a ceramic?
Choose your answer.
A Bronze
B Melamine formaldehyde
C Porcelain
D Polycarbonate
Model answer
C Porcelain
Explanation
Porcelain is a ceramic made by firing clay at a high temperature. Bronze is a non-ferrous alloy, melamine formaldehyde is a thermosetting polymer (it can look like china in tableware, which is a common trap) and polycarbonate is a thermoplastic.
Mark scheme
1 mark
C / Porcelain
Accept the letter or the option text. If more than one option is given, 0 marks.
Question 2
2 marks
The structural timber joists of an outdoor deck are pressure treated with a preservative.
Explain why.
Model answer
Outdoors the joists will often be wet, which allows fungi to rot the timber and insects to attack it. The preservative forced deep into the wood protects it from rot and insects, so the joists keep their strength, the deck stays safe to stand on and it lasts many years longer.
Explanation
Timber is a natural material that can rot when it is damp. Pressure treatment pushes preservative deep into the wood, not just onto the surface. One mark is for what the treatment protects against and one for why that matters for a structural part.
Mark scheme
1 mark
The preservative protects the timber from rot / fungal decay / insect attack when it gets wet outdoors
Accept 'stops it rotting'. Do not accept 'makes it waterproof' or 'stops it rusting'.
1 mark
So the joists keep their strength and the deck stays safe / the deck lasts much longer before the joists need replacing
A linked consequence. Do not accept 'makes it look better'.
Question 3
2 marks
Explain why ceramic materials are difficult to cut and machine.
Model answer
Ceramics are extremely hard, so normal cutting tools are blunted almost at once; they have to be cut with diamond tools or ground with abrasive wheels. They are also brittle, so instead of deforming they chip or crack under the cutting forces or if they are clamped too tightly.
Explanation
How a material behaves when it is machined depends on its properties. Hardness wears tools out, and brittleness means the material cracks rather than being cut cleanly. That is why ceramic parts are usually shaped before firing, and only ground to their final size afterwards.
Mark scheme
1 mark
Ceramics are very hard, so ordinary cutting tools are quickly blunted or worn; diamond tools or grinding with abrasive wheels are needed
Must link hardness to wear of cutting tools or the need for special tools. Do not accept 'they are strong' on its own.
1 mark
Ceramics are brittle, so they chip / crack / shatter under the cutting forces, clamping pressure or vibration instead of deforming
Must link brittleness to chipping or cracking during machining. The two marks are independent.
Question 4
4 marks
Ceramic tiles are used for the floor of a busy restaurant kitchen.
Discuss two reasons why ceramic tiles are suitable for this floor.
Model answer
Ceramic tiles are very hard, so they resist wear and scratching from the constant foot traffic and the heavy trolleys in a busy kitchen, and the floor keeps its appearance for many years. Their glazed surface is non-absorbent, so spilt oil, sauces and water do not soak in, which makes the floor easy to clean and hygienic - essential where food is prepared.
Explanation
Each reason scores 1 mark and its linked justification a second. Hardness, a non-absorbent hygienic surface, chemical resistance and heat resistance are all good reasons. Do not call ceramics 'tough': they are brittle, so a tile can crack if a heavy pan is dropped on it.
Mark scheme
1 mark
Reason 1 identified: e.g. hard / wear resistant; glazed surface is non-absorbent (impervious); chemically inert / resistant to chemicals; heat resistant / does not burn; does not rot or corrode
One mark per reason identified (up to two) and one additional mark for each justification (up to two). Do not accept 'tough' (ceramics are brittle), 'strong' or 'cheap' with no reason.
1 mark
Justification of reason 1, e.g. hard, so the floor resists scratching and wear from heavy foot traffic and trolleys and keeps its appearance; non-absorbent glaze, so spills and grease do not soak in and the floor is easy to clean and hygienic
A linked consequence for the kitchen floor ('so that ...'). Other valid links: resistant to cleaning chemicals and acidic food spills, so the surface is not damaged; heat resistant, so hot pans or fat spilt on it do not damage it; does not rot in wet conditions, so it lasts a long time.
1 mark
Reason 2 identified (different from reason 1)
Must be different from reason 1. Hard and wear resistant count as the same reason.
1 mark
Justification of reason 2
As for the first justification.
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.