Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Engineering Smart practice A mixed round aimed at your weak spots
Unit 1
Engineering materials
Unit 2
Engineering manufacturing processes
Additive manufacturing
Additive manufacturing
Material removal
Material removal
Casting and moulding
Casting and moulding
Joining and assembly
Joining and assembly
Heat and chemical treatment
Heat and chemical treatment
Surface finishing
Surface finishing
Unit 3
Systems
Unit 4
Testing and investigation
Unit 5
The impact of modern technologies
Unit 6
Practical engineering skills
Avg
score:
–
Topics
done:
0/32

Material costs and supply

Practise 16 exam-style questions on Material costs and supply for AQA GCSE Engineering. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–8 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Thermoplastics that will be injection moulded are usually supplied to the manufacturer in which form?

Choose your answer.

  • A Billets
  • B Granules
  • C Ingots
  • D Planks

Model answer

B Granules

Explanation

Polymers for moulding and extrusion are supplied as small granules (pellets), which flow easily into the hopper of the machine and melt evenly. Polymers are also supplied as sheet, rod, tube and film. Billets and ingots are forms of metal, and planks are a form of timber.

Mark scheme
  1. 1 mark

    B / Granules

    Accept the letter or the option text. If more than one option is given, 0 marks.

Question 2

2 marks

Brass costs more per kilogram than low carbon steel. However, brass is often chosen for small turned parts, such as plumbing fittings, that are made in large numbers on automatic lathes.

Explain why using brass can reduce the total cost of each part.

Model answer

Brass is very easy to machine: it can be cut at high speeds, the chips break off cleanly and it causes little wear on the cutting tools. Each fitting therefore takes less time on the lathe and the tools need changing less often. Brass also resists corrosion, so no protective finish is needed. These savings in machine time and finishing are greater than the extra cost of the brass itself.

Explanation

The cost of a part is not just the cost of the material: machining time, tooling and finishing all add to it. A material's ability to be machined, treated and shaped can make a more expensive material the cheaper choice overall, especially when parts are made in large numbers.

Mark scheme
  1. 1 mark

    Brass is very easy to machine (free-cutting): it can be cut at high speeds, its chips break off easily, it causes little tool wear and gives a good surface finish

    Must refer to how easily brass machines. Accept 'it is softer and easier to cut than steel'.

  2. 1 mark

    So each part takes less machine time / tools last longer / no finishing or protective coating is needed (brass resists corrosion), which saves more than the extra material cost

    Must link to a saving in manufacturing cost. Do not accept 'brass is cheaper' (the question says it costs more).

Question 3

3 marks

A company needs 92 sheets of aluminium. Figure 1 shows the supplier's price list.

The company decides to order 100 sheets instead of 92, because the price per sheet is lower.

Calculate how much money the company saves by ordering 100 sheets instead of 92.

Show your working.

Example prices for aluminium sheet. Table with columns "Number of sheets ordered", "Price per sheet in £". Number of sheets ordered: 1 to 24; Price per sheet in £: 46.00 | Number of sheets ordered: 25 to 49; Price per sheet in £: 42.00 | Number of sheets ordered: 50 to 99; Price per sheet in £: 39.00 | Number of sheets ordered: 100 or more; Price per sheet in £: 35.75.

Model answer

92 sheets are in the 50 to 99 price band: 92 × £39.00 = £3588.00
100 sheets are in the 100 or more band: 100 × £35.75 = £3575.00
Saving = £3588.00 − £3575.00 = £13.00

Explanation

Price breaks lower the price per item when more is bought, because the supplier's handling and delivery costs are shared over a larger order. Here, 8 extra sheets actually cost £13 less in total. Check carefully which price band each quantity falls in: 92 sheets do not get the 100-or-more price.

Mark scheme
  1. 1 mark

    92 sheets cost 92 × 39.00 = £3588.00; or a correct final answer of £13 with no working

    An answer of £13 (or £13.00) with no working scores 3 marks. Allow error carried forward (ECF). Using the 100-or-more price for 92 sheets (92 × 35.75 = £3289) does not score this mark.

  2. 1 mark

    100 sheets cost 100 × 35.75 = £3575.00

    Must use the price for 100 or more sheets.

  3. 1 mark

    Saving = 3588.00 − 3575.00 = £13.00

    ECF: their cost of 92 sheets minus their cost of 100 sheets.

Question 4

6 marks

Designers and manufacturers can choose from a very wide range of engineering materials.

Discuss the benefits to designers and manufacturers of having a choice of materials. Give at least three examples in your answer.

Model answer

Having a choice of materials means a designer can match the material to what each part must do. For example, a bicycle maker can use aluminium instead of steel for a lighter frame, and a machine guard can be made from polycarbonate, which is tough enough not to shatter, rather than acrylic.

A choice also helps to control cost. If a cheaper material still meets the requirements, it can be used instead: low carbon steel can replace stainless steel for an indoor frame that will be painted, and timber is cheaper than steel for house roof joists. This keeps the product's price competitive.

Choice protects manufacturers against problems with supply. If the price of copper rises sharply or it is hard to get, some cables can be made from aluminium instead, so production can continue.

Manufacturers can also choose materials that suit the machines they already own. A company with injection moulding machines will choose a thermoplastic such as ABS, and a company that makes fittings on automatic lathes will choose free-machining brass, because it can be cut quickly with little tool wear. This saves time and money.

Finally, a choice of materials lets companies meet environmental targets and customers' expectations, for example by using recycled aluminium or timber from sustainably managed forests.

Explanation

Level 3 needs several benefits, each explained and backed by a specific example - and at least three examples in total. Good benefits to discuss are matching properties to function, reducing cost, coping with changes in supply and price, suiting existing manufacturing processes and sustainability. Naming materials without saying why the choice helps stays at Level 1 or 2.

Mark scheme
  1. 6 marks

    Levels of response (6 marks).
    Level 3 (5-6 marks): A detailed discussion of the benefits to designers and manufacturers of having a choice of materials, supported by at least three relevant examples. Points are clearly explained and logically linked.
    Level 2 (3-4 marks): Some benefits discussed with some explanation, supported by one or two relevant examples, OR three or more examples given but with limited explanation of the benefits.
    Level 1 (1-2 marks): One or more basic benefits stated, with little or no explanation or examples.
    0 marks: No response or nothing worthy of credit.

    Max 4 if fewer than three examples are given.
    Indicative content (accept all other valid benefits and examples):
    Properties matched to function: the best material for each part can be chosen, e.g. aluminium instead of steel where low weight matters, polycarbonate instead of acrylic for a guard that must not shatter, stainless steel for food equipment.
    Cost: a cheaper material can be used if it still does the job, e.g. low carbon steel instead of stainless steel for an indoor frame, ABS instead of polycarbonate for a casing, timber instead of steel for house roof joists, keeping the product competitive.
    Availability and supply: if one material is in short supply or its price rises, another can be used so production continues, e.g. aluminium instead of copper for some cables.
    Manufacturing: a material can be chosen to suit the machines and processes the company already has, e.g. thermoplastics for injection moulding, free-machining brass for parts made on automatic lathes, saving time and money.
    Sustainability: recycled or recyclable materials (recycled aluminium, sustainably sourced timber) can be chosen to meet laws and customer expectations.
    Aesthetics and markets: different finishes, colours and textures allow products for different markets.
    Innovation: newer materials such as composites make new products possible, e.g. CFRP drones and racing bicycles.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.