Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Engineering Smart practice A mixed round aimed at your weak spots
Unit 1
Engineering materials
Unit 2
Engineering manufacturing processes
Additive manufacturing
Additive manufacturing
Material removal
Material removal
Casting and moulding
Casting and moulding
Joining and assembly
Joining and assembly
Heat and chemical treatment
Heat and chemical treatment
Surface finishing
Surface finishing
Unit 3
Systems
Unit 4
Testing and investigation
Unit 5
The impact of modern technologies
Unit 6
Practical engineering skills
Avg
score:
–
Topics
done:
0/32

Additive manufacturing

Practise 14 exam-style questions on Additive manufacturing for AQA GCSE Engineering. Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–8 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

In fused deposition modelling (FDM), which part of the printer melts the plastic filament?

Choose your answer.

  • A Heated build plate
  • B Cooling fan
  • C Extruder nozzle (hot end)
  • D Filament spool

Model answer

C Extruder nozzle (hot end)

Explanation

The filament is pushed into the hot end, where it is heated above its melting temperature and extruded through a fine nozzle. The heated build plate (A) is warm, not hot enough to melt the filament: it helps the first layer stick and reduces warping. The cooling fan does the opposite job, cooling each layer so that it sets.

Mark scheme
  1. 1 mark

    C / Extruder nozzle (hot end)

    Accept the letter or the option text. If more than one option is given, 0 marks.

Question 2

2 marks

Give two printer settings that affect the time taken to make a part by fused deposition modelling (FDM).

Model answer

1. Layer height
2. Infill density

Explanation

Thicker layers mean fewer layers, so the print is faster but the surface is rougher. A lower infill percentage leaves the inside partly hollow, using less plastic and less time. Print speed, wall thickness, supports and nozzle size also change the time; the part's size is a design decision rather than a printer setting.

Mark scheme
  1. 2 marks

    Any two from: layer height (thickness) / infill density (percentage) or pattern / print speed / number of perimeters (wall thickness or shells) / whether supports are used / nozzle diameter / orientation of the part on the build plate

    1 mark for each different correct setting, max 2. Do not accept the colour of the filament, the type of CAD software or 'the size of the part' (not a printer setting).

Question 3

3 marks

Use the word bank to complete the statements about fused deposition modelling (FDM).

Before printing, the CAD model is divided into thin layers by ...(a)... software. A thermoplastic ...(b)... is pushed into a heated nozzle, where it melts. The nozzle moves across the build platform, depositing the molten plastic to form one ...(c)... of the part. The platform then moves down a small distance and the process repeats.

Word bank
filament   granules   layer   laser   mould   powder   rendering   slicing

Give the missing word for (a), (b) and (c).

Model answer

(a) slicing
(b) filament
(c) layer

Explanation

Slicing software turns the CAD model (usually saved as an STL file) into layers and works out the nozzle path for each one. FDM uses thermoplastic filament from a spool; granules are used in injection moulding and powder in laser sintering. The part is built up one layer at a time, which is why it is called additive manufacturing.

Mark scheme
  1. 1 mark

    (a) slicing

    Ignore minor spelling errors. Accept 'slicer'. Do not accept rendering.

  2. 1 mark

    (b) filament

    Ignore minor spelling errors. Do not accept granules or powder.

  3. 1 mark

    (c) layer

    Ignore minor spelling errors.

Question 4

6 marks

Describe, in stages, how a titanium alloy component is made by laser sintering.

Model answer

1. The component is designed as a 3D CAD model, saved as an STL file and sliced into layers about 0.05 mm thick, with supports added under overhangs.
2. The machine's build chamber is sealed and filled with argon so there is no oxygen to react with the hot titanium.
3. A recoater blade spreads a thin, even layer of titanium alloy powder across the metal build plate.
4. A high-power laser, steered by mirrors, traces the shape of the first slice. The heat fuses the powder particles together where the laser passes; the rest stays loose.
5. The build plate moves down by one layer thickness, another layer of powder is spread, and the laser fuses the next slice onto the one below. This repeats until the component is complete.
6. After cooling, the loose powder is vacuumed away and sieved for reuse. The operator wears a respirator, gloves and anti-static clothing, because fine titanium powder is harmful to breathe and can ignite.
7. The component is heat treated to relieve stresses, cut off the build plate, and the supports are removed. Holes and mating faces are then machined to size and the surface is shot blasted.

Explanation

Top-level answers give the stages in order (CAD and slicing, inert atmosphere, spread powder, laser fuses the layer, lower the plate and repeat, remove loose powder, post-process) with detail of the equipment and the safety risks of metal powder and lasers. Answers that describe FDM (filament and nozzle) are describing the wrong process. A bare list such as 'design, print, finish' is capped at 2 marks.

Mark scheme
  1. 6 marks

    Levels of response (6 marks).
    Level 3 (5-6 marks): Detailed explanation including all key stages to make the component by laser sintering, with the equipment used and safety. Notes are clear and in a logical order.
    Level 2 (3-4 marks): Some stages described in detail OR the majority of stages covered but with insufficient detail to allow correct manufacture.
    Level 1 (1-2 marks): One or more basic steps/stages listed.
    0 marks: No response or nothing worthy of credit.

    Max 2 if the stages are only listed with no detail. Indicative content, key stages in order (accept all other valid responses):
    1. The component is modelled in CAD, exported (e.g. as an STL file) and sliced into very thin layers; supports are added where needed.
    2. The build chamber is sealed and filled with an inert gas such as argon to remove oxygen; the metal build plate may be preheated.
    3. A recoater blade or roller spreads a thin, even layer of titanium powder across the build plate.
    4. A high-power laser, steered by mirrors, scans the cross-section of that layer, heating the powder so the particles fuse together and to the layer below.
    5. The build plate lowers by one layer thickness, a new layer of powder is spread, and the process repeats until the component is complete.
    6. The component cools in the powder; the loose powder is removed (brushed or vacuumed) and sieved so it can be reused.
    7. The component is stress-relieved by heat treatment, cut from the build plate, the supports are removed, and holes or mating faces are machined and the surface finished (e.g. shot blasted).
    Safety: fine metal powder can be inhaled and is a fire or explosion risk, so wear a respirator, gloves and anti-static clothing; the laser is fully enclosed with interlocks; take care with inert gas, which can cause suffocation in a closed room.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.