Level:
Correct: 0
Incorrect: 0
Marks: 0/0

Osmosis

Practise 13 exam-style questions on Osmosis for AQA GCSE Combined Science (Biology Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 13 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
13 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Define osmosis.

Model answer

Osmosis is the diffusion of water from a dilute solution to a more concentrated solution through a partially permeable membrane.

Explanation

Osmosis is a special case of diffusion that involves only water. A common mistake is to describe the solute moving, or to say water moves from a concentrated to a dilute solution.

Mark scheme
  1. 1 mark

    the diffusion of water

    allow movement of water molecules

  2. 1 mark

    from a dilute solution to a concentrated solution through a partially permeable membrane

    both ideas needed for this mark; allow selectively permeable; allow from a high water concentration to a low water concentration

Question 2

2 marks

In an osmosis investigation, a student calculated the percentage change in mass of each potato cylinder rather than just the change in mass.

Explain why.

Model answer

The cylinders did not all have exactly the same starting mass. Calculating the percentage change in mass allows the results to be compared fairly, because it shows the change relative to each cylinder's starting mass.

Explanation

A 0.2 g change is a large change for a 1 g cylinder but a small change for a 5 g cylinder. Percentage change removes the effect of different starting masses.

Mark scheme
  1. 1 mark

    the cylinders had different starting masses

  2. 1 mark

    so percentage change allows a fair comparison between cylinders

    allow so the results can be compared

Question 3

3 marks

A student placed potato cylinders in sugar solution with a concentration of 100 g/dm³. The table shows the percentage change in mass in three trials.

Identify the anomalous result.
Calculate the mean percentage change in mass, X, without the anomalous result.

Table with columns "Concentration of sugar solution in g/dm³", "Trial 1: % change in mass", "Trial 2: % change in mass", "Trial 3: % change in mass", "Mean % change in mass". Concentration of sugar solution in g/dm³: 100; Trial 1: % change in mass: −2.1; Trial 2: % change in mass: −2.5; Trial 3: % change in mass: −9.8; Mean % change in mass: X.

Model answer

The anomalous result is −9.8% (trial 3), because it is very different from the other two results.
X = (−2.1 + −2.5) ÷ 2 = −4.6 ÷ 2 = −2.3%

Explanation

An anomaly is a result that does not fit the pattern of the others. It should be left out when calculating a mean, and ideally the trial should be repeated. Keep the minus sign, because it shows the cylinders lost mass.

Mark scheme
  1. 1 mark

    −9.8 (%)

    allow trial 3

  2. 1 mark

    (−2.1 + −2.5) ÷ 2

    allow ecf from an incorrect anomaly; an answer of −2.3 scores the last 2 marks

  3. 1 mark

    −2.3 (%)

    do not accept 2.3 without the minus sign

Question 4

4 marks

When red blood cells are put into distilled water, they swell and burst. When plant cells are put into distilled water, they swell but do not burst.

Explain these observations.

Model answer

Distilled water is more dilute than the contents of both kinds of cell, so water moves into the cells by osmosis through their partially permeable membranes. Red blood cells have no cell wall, so as water enters, the cell membrane stretches until the cell bursts. Plant cells have a strong cellulose cell wall, so when the cell swells the wall resists further expansion; the cell becomes firm (turgid) but does not burst.

Explanation

Both cells take in water for the same reason; the difference in what happens is due to the cell wall. This is why plant cells are firm when well watered.

Mark scheme
  1. 1 mark

    water moves into both types of cell by osmosis

  2. 1 mark

    because the cell contents are more concentrated than distilled water

    allow water moves from a dilute solution to a concentrated solution

  3. 1 mark

    red blood cells / animal cells have no cell wall, so the membrane stretches until it bursts

  4. 1 mark

    plant cells have a (strong, cellulose) cell wall that stops the cell bursting

    allow the cell becomes turgid / firm

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Osmosis

The big idea

Water moves into and out of cells by osmosis, a special kind of diffusion. Whether a cell gains or loses water depends on how concentrated the solution outside it is, compared with the cell's contents. The osmosis required practical measures this with plant tissue, and you need to calculate percentage changes in mass and read graphs of the results.

What osmosis is

Osmosis is the diffusion of water from a dilute solution to a more concentrated solution through a partially permeable membrane.

  • A dilute solution has a lot of water and little dissolved substance (solute). A concentrated solution has less water.
  • A partially permeable membrane lets some substances through, such as small water molecules, but not others, such as larger sugar molecules. Cell membranes are partially permeable.
  • Only the water moves. The dissolved salt or sugar stays where it is.

Osmosis and diffusion are both passive (no energy needed), but osmosis is only the movement of water and always needs a partially permeable membrane. Diffusion can involve any particles and needs no membrane.

What happens to cells in different solutions

Solution outside the cellAnimal cell, such as a red blood cellPlant cell
More dilute than the cell contents (for example pure water)Water moves in by osmosis; the cell swells and may burst, because it has no cell wallWater moves in; the cell swells and becomes turgid (firm); the strong cell wall stops it bursting
Same concentrationNo net movement of water; no changeNo net movement of water; no change
More concentratedWater moves out by osmosis; the cell shrinksWater moves out; the cell becomes flaccid (soft), and in a very concentrated solution the membrane pulls away from the wall

Turgid cells press against each other and hold a plant up. When its cells lose water, a plant wilts.

Required practical: Effect of sugar or salt solutions on plant tissue

  • Method: cut potato cylinders with a cork borer, and use a scalpel and ruler to cut them all to the same length. Blot each one dry, weigh it and record its starting mass. Put each cylinder in a boiling tube with the same volume of a different concentration of sugar solution, such as 0.0, 0.2, 0.4, 0.6, 0.8 and 1.0 mol/dm³. Leave them all for the same time at the same temperature. Remove each cylinder, blot it dry in the same way and reweigh it.
  • Variables: independent: the concentration of the solution. Dependent: the percentage change in mass. Control: cylinder size, volume of solution, time, temperature and type of potato.
  • Why percentage change? The cylinders start with different masses, so percentage change lets you compare them fairly.
  • Why blot? Solution left on the surface would add to the mass.
  • Typical results: cylinders gain mass in dilute solutions and lose mass in concentrated ones. Repeat each concentration and calculate a mean, leaving out anomalous results.
  • Safety: cut downwards onto a tile, away from your fingers.
Diagram of 6 boiling tubes in a rack, each with a potato cylinder in a solution. A row of 6 boiling tubes stands in a test-tube rack. Each tube is about two-thirds full of sucrose solution, and a cylinder of potato rests at the bottom of each. Printed under the tubes, from left to right: "0.0 mol/dm³", "0.2 mol/dm³", "0.4 mol/dm³", "0.6 mol/dm³", "0.8 mol/dm³" and "1.0 mol/dm³". The label "potato cylinder" points to a potato cylinder; the label "sugar solution" points to the sucrose solution.
One potato cylinder in each concentration of sugar solution.
Typical results. Line graph of percentage change in mass in % (y-axis, -20 to 25) against concentration of sugar solution in mol/dm³ (x-axis, 0 to 1). The line is a smooth curve through (0, 18), (0.2, 7), (0.4, -3), (0.6, -10), (0.8, -14), (1, -15).
Where the curve crosses 0%, the solution has the same concentration as the cell contents (here about 0.34 mol/dm³).

Read a graph like this in three parts. Above the 0% line, water entered the cells because the solution was more dilute than the cell contents. Below it, water left the cells. Where the curve crosses 0%, there is no net movement of water, so the solution has the same concentration as the cell contents. At high concentrations the curve levels off, because the cells have lost nearly all the water they can.

Percentage change in mass

A potato cylinder has a mass of 1.60 g. After 30 minutes in a sugar solution its mass is 1.48 g. Calculate the percentage change in mass.

Change in mass: \(1.48 - 1.60 = -0.12\text{ g}\)

\(\text{percentage change} = \dfrac{\text{change in mass}}{\text{starting mass}} \times 100 = \dfrac{-0.12}{1.60} \times 100 = -7.5\%\)

The minus sign shows a loss: water left the cells, so the solution was more concentrated than the cell contents.

Rate of water uptake

A cylinder in pure water gains 0.36 g in 45 minutes. Calculate the mean rate of water uptake.

\(\text{rate} = \dfrac{0.36\text{ g}}{45\text{ min}} = 0.008\) g per minute

Common mistakes

  • Saying the salt or sugar moves by osmosis. Only water moves.
  • Writing "through a membrane". Say partially permeable membrane.
  • Dividing the change in mass by the final mass. Always divide by the starting mass.
  • Saying "no water moves" when there is no change in mass. Water moves both ways at the same rate: there is no net movement.
  • Saying plant cells burst in pure water. The cell wall stops them; they become turgid.

Exam tip

In "describe and explain" questions on osmosis graphs, quote values from the graph, name osmosis, and compare the solution with the cell contents ("more dilute than the cell contents, so water moves into the cells by osmosis"). Keep the sign in a percentage change: a loss is negative.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.