Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Practice
Course:
Topics:
Year 9 Maths Smart practice A mixed round aimed at your weak spots
Unit 1
Number: standard form, indices and accuracy
Unit 2
Percentages and money
Unit 3
Algebraic expressions and proof
Unit 4
Equations and inequalities
Unit 5
Graphs and sequences
Unit 6
Ratio, proportion and rates
Unit 7
Congruence, similarity and transformations
Unit 8
Pythagoras' theorem and trigonometry
Unit 9
3D shapes and measures
Unit 10
Probability
Unit 11
Statistics
Avg
score:
–
Topics
done:
0/46

Pressure and compound units

Practise 27 questions on Pressure and compound units for Year 9 Maths. Write your answer and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 27 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme.

Question 1

1 mark

Sound travels through air at 340 m/s.

Kai sees a flash of lightning. The sound of the thunder reaches him 5 seconds later. Assume he sees the flash at the moment it happens.

How far away from Kai was the lightning?

Model answer

\(\text{distance} = \text{speed} \times \text{time}\)
\(340 \times 5 = 1700\)
The lightning was 1700 m (1.7 km) away.

Explanation

The sound travels 340 metres every second, so in 5 seconds it travels \(340 \times 5 = 1700\) m. Rearranging speed = distance ÷ time gives distance = speed × time. A common mistake is to divide the speed by the time.

Mark scheme
  1. 1 mark

    1700 (m)

    Accept 1700, 1,700 m or 1.7 km (1.7 needs its unit, km). Do not accept 68 (from \(340 \div 5\)). A correct answer with no working scores full marks.

Question 2

2 marks

\(\text{pressure} = \dfrac{\text{force}}{\text{area}}\)

A tractor has a weight of 42,000 N. Its pressure on the ground is 70,000 N/m².

The tractor stands on four tyres. Each tyre has the same area touching the ground.

Work out the area of ground that each tyre touches.

Model answer

Total area \(= 42{,}000 \div 70{,}000 = 0.6\) m²
One tyre \(= 0.6 \div 4 = 0.15\) m²

Explanation

Rearrange the formula to get area = force ÷ pressure. The weight of the tractor is the force, so the four tyres touch \(42{,}000 \div 70{,}000 = 0.6\) m² of ground altogether. Each tyre touches a quarter of that, 0.15 m². A common mistake is to stop at 0.6 m², which is the area of all four tyres.

Mark scheme
  1. 1 mark

    Total area \(42000 \div 70000 = 0.6\) (m²); or the correct answer 0.15 m² with no working

    \(\text{area} = \text{force} \div \text{pressure}\)

  2. 1 mark

    0.15 (m²)

    Accept 0.15 m² or 1500 cm². Do not accept 0.6 (the area of all four tyres) or 0.42 (from \(70000 \div 42000 \div 4\)). A correct answer with no working scores full marks.

Question 3

2 marks

You may use a calculator.

The density of sea water is 1.03 g/cm³. Ivy collects 2,575 g of sea water for a science lesson.

Work out the volume of the sea water, in cm³.

Model answer

\(\text{volume} = \text{mass} \div \text{density}\)
\(2575 \div 1.03 = 2500\)
The volume is 2500 cm³.

Explanation

Each cm³ of sea water has a mass of 1.03 g, so divide the mass by the density: \(2575 \div 1.03 = 2500\) cm³. The answer is a little less than 2575 because each cm³ is a little more than 1 g. A common mistake is to multiply by the density, which gives a volume larger than the mass.

Mark scheme
  1. 1 mark

    \(2575 \div 1.03\); or the correct answer 2500 cm³ with no working

    \(\text{volume} = \text{mass} \div \text{density}\)

  2. 1 mark

    2500 (cm³)

    Accept 2,500. Do not accept 2652.25 (from \(2575 \times 1.03\)). A correct answer with no working scores full marks.

Question 4

4 marks

You may use a calculator.

Water has a density of 1 g/cm³. Ice has a density of 0.92 g/cm³. When water freezes, its mass does not change.

Aisha pours 690 cm³ of water into an empty plastic bottle and puts it in a freezer. The bottle holds 740 cm³ when it is full.

Aisha says, "There is less than 740 cm³ of water, so the ice will fit in the bottle."

Is Aisha right? Show how you decide.

Model answer

Mass of the water \(= 690 \times 1 = 690\) g, so the ice also has a mass of 690 g.
Volume of the ice \(= 690 \div 0.92 = 750\) cm³
750 cm³ is more than 740 cm³, so the ice will not fit in the bottle.
No, Aisha is not right.

Explanation

When water freezes, its mass stays the same but its density goes down, so its volume goes up. Find the mass with mass = density × volume, then the volume of the ice with volume = mass ÷ density: \(690 \div 0.92 = 750\) cm³. That is 10 cm³ more than the bottle holds. A common mistake is to multiply by 0.92, which makes the ice smaller than the water.

Mark scheme
  1. 1 mark

    Mass of the water \(690 \times 1 = 690\) (g)

    Implied by \(690 \div 0.92\). The ice has the same mass, 690 g. Another method: a full bottle holds \(740 \times 0.92 = 680.8\) g of ice, which is made from only 680.8 cm³ of water; this earns the first three marks, and the fourth for No with these values.

  2. 1 mark

    Volume of the ice \(690 \div 0.92\) (volume = mass ÷ density)

    Follow through from their mass.

  3. 1 mark

    750 (cm³)

    The volume of the ice. Do not accept 634.8 (from \(690 \times 0.92\), multiplying by the density).

  4. 1 mark

    No, because the ice has a volume of 750 cm³, which is more than the 740 cm³ the bottle holds

    Needs correct values that show it: 750 cm³ of ice compared with 740 cm³ (or, by the other method, 680.8 cm³ of water compared with 690 cm³); accept 'it is 10 cm³ too big'. A correct decision with no working, or with wrong values, scores 0 for this mark. A complete correct method with this conclusion scores all 4 marks.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Topic notes

Pressure and compound units

The big idea

A compound unit is made from two units, such as km/h or g/cm³. Speed, density and pressure are each one quantity divided by another: if you know two of the three values, you can find the third. The units tell you which formula to use.

Reminder from Year 8: speed = distance ÷ time, and density = mass ÷ volume.

Pressure

A force is a push or a pull, measured in newtons (N). Pressure is the force on each unit of area:

\[ \text{pressure} = \dfrac{\text{force}}{\text{area}} \]

With the area in m², the pressure is in N/m² (newtons per square metre). With the area in cm², it is in N/cm². The same force on a smaller area gives a bigger pressure: that is why a sharp knife cuts well.

Weight is a force, so it is in newtons, not kilograms. A question that gives a mass also gives a rule for the weight, such as "weight in newtons = mass in kg × 10". Use the rule the question gives.

A mini digger has a mass of 1500 kg. Its weight in newtons is its mass in kg × 10. Each of its two tracks touches the ground in a rectangle 120 cm by 25 cm. Find the pressure on the ground in N/cm².

Weight: \(1500 \times 10 = 15{,}000\) N

Area: one track is \(120 \times 25 = 3000\) cm², so both tracks are \(2 \times 3000 = 6000\) cm².

Pressure \(= 15{,}000 \div 6000 = 2.5\) N/cm²

The wide tracks spread the weight, so the digger does not sink into soft ground.

A crane leg pushes down on a square concrete pad with a force of 600,000 N. The ground can take a pressure of up to 150,000 N/m². Find the smallest area the pad can have, and the length of its sides.

Area = force ÷ pressure = \(600{,}000 \div 150{,}000 = 4\) m²

The pad is a square, so each side is \(\sqrt{4} = 2\) m.

Rearranging and the formula triangle

QuantityFormulaRearranged
Speedspeed = distance ÷ timedistance = speed × time; time = distance ÷ speed
Densitydensity = mass ÷ volumemass = density × volume; volume = mass ÷ density
Pressurepressure = force ÷ areaforce = pressure × area; area = force ÷ pressure

A formula triangle holds the same facts. Cover the quantity you want: one above the other means divide, and side by side means multiply.

A formula triangle split into three parts. The word force is in the top part. The bottom part is split in two, with pressure on the left and area on the right.
Covering area leaves force over pressure, so area = force ÷ pressure. Covering force leaves pressure next to area, so force = pressure × area.

A triangle only works when one quantity is the other two multiplied or divided. For a formula with adding, such as \(y = 3x + 2\), use inverse operations instead.

Choosing the formula from the units

The unit tells you what to divide: g/cm³ is grams ÷ cm³. Make the units match before you calculate: with a density in g/cm³, use grams and centimetres. Many problems take two steps, such as finding a volume and then a mass.

A block of pine is a cuboid with a base 25 cm by 8 cm. Its mass is 1.8 kg, and pine has a density of 0.6 g/cm³. How tall is the block?

Change the mass to grams to match the density: 1.8 kg = 1800 g.

Volume = mass ÷ density = \(1800 \div 0.6 = 18{,}000 \div 6 = 3000\) cm³

Area of the base \(= 25 \times 8 = 200\) cm²

Height = volume ÷ area of the base = \(3000 \div 200 = 15\) cm

Check: \(25 \times 8 \times 15 = 3000\) cm³, and \(3000 \times 0.6 = 1800\) g.

Rates of flow and of work

A rate of flow (such as litres per minute) or a rate of work (such as bricks laid per hour) is how much flows or gets done in each unit of time. Both work like speed: amount = rate × time, and time = amount ÷ rate. When two things work at once, add their rates, or subtract one that works against the other.

A bath holds 160 litres. The tap fills it at 11 litres per minute, but the plug leaks 1 litre per minute. How long does the bath take to fill?

Each minute the bath gains \(11 - 1 = 10\) litres.

Time = amount ÷ rate = \(160 \div 10 = 16\) minutes

Remember

  • pressure = force ÷ area, force = pressure × area, area = force ÷ pressure.
  • Forces, including weight, are in newtons (N). Pressure is in N/m² or N/cm².
  • The same force on a smaller area gives a bigger pressure.

Common mistakes

  • Multiplying instead of dividing: 15,000 N on 6000 cm² is \(15{,}000 \div 6000 = 2.5\) N/cm², not 90,000,000.
  • Using the mass as the force: the 1500 kg digger pushes down with 15,000 N, from the rule in the question.
  • Using the area of one track when the weight is spread over both.
  • Turning a formula the wrong way: volume = mass ÷ density, not mass × density.

Top tip

Say the unit in words. "Newtons per square centimetre" means newtons divided by square centimetres: it gives you the formula, and tells you the area must be in cm².

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.