The big idea
A compound unit, such as km/h or g/cm³, is made from two units. To convert it, change one unit at a time. Then check that the new number makes sense.
Reminder from Year 8: 1 km = 1000 m, 1 kg = 1000 g, 1 litre = 1000 ml, 1 cm³ = 1 ml and 1 m³ = 1000 litres. An hour is 60 minutes, which is \(60 \times 60 = 3600\) seconds.
One unit at a time
Write the rate as an amount in a time, change each unit, then divide. For 2.4 kg per minute in grams per second: 2.4 kg = 2400 g and 1 minute = 60 seconds, so the rate is \(2400 \div 60 = 40\) g per second.
When only the time changes, count how many small units fit into the big one. An hour holds 60 minutes, so 5 litres per minute is \(5 \times 60 = 300\) litres per hour. To go from per hour to per minute, divide by 60.
A fuel pump delivers 0.6 litres of petrol each second. Write this rate in litres per minute. How long does it take to pump 45 litres?
A minute is 60 seconds, so the pump delivers \(0.6 \times 60 = 36\) litres per minute.
Time = amount ÷ rate = \(45 \div 36 = 1.25\) minutes
0.25 of a minute is \(0.25 \times 60 = 15\) seconds, so it takes 1 minute 15 seconds.
Speeds: km/h and m/s
Here both units change.
- km/h to m/s: multiply by 1000, then divide by 3600. This is the same as dividing by 3.6.
- m/s to km/h: multiply by 3600, then divide by 1000. This is the same as multiplying by 3.6.
A tram travels at 72 km/h along a straight stretch of track 500 m long. How many seconds does it take?
The distance is in metres, so change the speed into m/s.
72 km = 72,000 m and 1 hour = 3600 seconds, so the speed is \(72{,}000 \div 3600 = 20\) m/s.
Check with the shortcut: \(72 \div 3.6 = 20\) ✓
Time = distance ÷ speed = \(500 \div 20 = 25\) seconds
Miles and kilometres
UK road signs use miles per hour (mph). To change between mph and km/h, use the conversion factor the question gives, such as 1 mile ≈ 1.6 km. Only the distance changes, not the time. A mile is longer than a kilometre, so the number in km/h is bigger. To compare quantities in different units, change them into the same units first.
On UK motorways the speed limit is 70 mph. In another country the motorway limit is 120 km/h. Use 1 mile ≈ 1.6 km to decide which limit is higher.
70 mph means 70 miles in an hour.
70 miles ≈ \(70 \times 1.6 = 112\) km, so 70 mph ≈ 112 km/h.
112 km/h is less than 120 km/h, so the other country's limit is higher.
Is the answer sensible?
Check that the unit matches what the question asks for, and that the size is sensible. A person walks at about 1.5 m/s (about 5 km/h), and a car on a motorway travels at about 30 m/s (about 110 km/h).
Stretch: density units
A density in g/cm³ is the mass of 1 cm³ in grams; in kg/m³ it is the mass of 1 m³ in kilograms. To convert, change both units.
Dry sand has a density of about 1600 kg/m³. Work out the mass of 250 cm³ of dry sand, in grams.
Change the density into g/cm³ to match the volume.
1600 kg = 1,600,000 g, and 1 m³ = 1,000,000 cm³.
So 1 cm³ has a mass of \(1{,}600{,}000 \div 1{,}000{,}000 = 1.6\) g: the density is 1.6 g/cm³.
Mass = density × volume = \(1.6 \times 250 = 400\) g
So a density in kg/m³ ÷ 1000 gives it in g/cm³, and g/cm³ × 1000 gives kg/m³.
Remember
- 1 hour = 60 minutes = 3600 seconds.
- km/h ÷ 3.6 = m/s, and m/s × 3.6 = km/h.
- Change one unit at a time, and write the units at every step.
Common mistakes
- Dividing by 60, not 3600, to change km/h into m/s: that gives metres per minute.
- Multiplying by 3.6 to get m/s. The m/s number must be the smaller one.
- Changing only one unit: 1600 kg/m³ is not 1,600,000 g/cm³, because the m³ must change too.
- Using the mile factor the wrong way: 70 mph is about 112 km/h, not \(70 \div 1.6 = 43.75\) km/h.
Top tip
Before you calculate, decide whether the new number should be bigger or smaller. Per hour is bigger than per minute, km/h is bigger than m/s, and kg/m³ is bigger than g/cm³.