Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Weighted mean, geometric mean and choosing an average

Practise 17 exam-style questions on Weighted mean, geometric mean and choosing an average for AQA GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student recorded the minimum temperature, in °C, at her school on four mornings in February.

4   -3   2   6

She wants to work out the geometric mean of these four temperatures.

Explain why the geometric mean of these temperatures cannot be found.

Model answer

The product of the values is \(4 \times (-3) \times 2 \times 6 = -144\), which is negative.
The geometric mean is the fourth root of this product, and a negative number has no fourth root, so the geometric mean cannot be found.

Explanation

The geometric mean of n values is the nth root of their product, so it is only used for positive values such as lengths, prices or growth multipliers. With one negative value among four, the product is negative and has no fourth root. Temperatures in °C can be negative, so an arithmetic mean or the median should be used instead.

Mark scheme
  1. 1 mark

    B1 for an explanation linking the negative value to the product or the root, eg one of the values (-3) is negative, so the product of the four values is negative (-144) and you cannot find the fourth root of a negative number

    oe. Accept 'the geometric mean can only be found for positive values and -3 is negative' or 'the product is negative so it has no fourth root'. 'There is a negative number' with no reference to the product, the root or the geometric mean needing positive values scores B0. Do not accept 'temperatures are not percentages' or 'the numbers are too small'. Ignore any non-contradictory or irrelevant statements.

Question 2

2 marks

A receptionist recorded the times, in minutes, that 9 patients waited to see a nurse.

3   5   6   6   7   8   9   11   49

The mean of these times is 11.6 minutes (to 1 decimal place).
The median is 7 minutes.

Comment on the suitability of the mean and of the median as an average for these waiting times.

Model answer

The mean is not suitable: it is pulled up by the one very long wait of 49 minutes, so 8 of the 9 patients waited less than the mean of 11.6 minutes.
The median is suitable: it is not affected by the 49 minutes, and 7 minutes is close to most of the waiting times.

Explanation

When choosing an average, the reason must refer to the data. Here one value (49) is far larger than the rest, so the mean is distorted and is bigger than 8 of the 9 times. Generic answers such as 'the median is the middle value' do not explain why it suits these data, and earn no credit.

Mark scheme
  1. 1 mark

    B1 for the mean is not suitable with a reason specific to these data, eg it is increased (distorted) by the one long wait of 49 minutes / 8 of the 9 patients waited less than the mean

    oe. The reason must refer to the 49 (or to 'the extreme value / outlier') or to how few times are above the mean. 'The mean is unsuitable because it uses all the values' scores B0. 'The mean is unsuitable' with no reason scores B0.

  2. 1 mark

    B1 for the median is suitable with a reason, eg it is not affected by the 49 / it is close to most of the waiting times

    oe. 'The median is suitable as it is the middle value' scores B0 (no reason linked to the data). Accept 'median is suitable as it ignores the extreme value'. Any values stated must be correct. Ignore any non-contradictory or irrelevant statements.

Question 3

3 marks

The number of passengers using a small railway station changed by
-15% in 2022
+20% in 2023
-10% in 2024.

Jamie says,
"The average yearly change is \((-15 + 20 - 10) \div 3 = -1.67\)%."

Use the geometric mean to work out the correct average yearly percentage change.
Give your answer to 2 decimal places.

Model answer

Multipliers: 0.85, 1.20, 0.90
Product \(= 0.85 \times 1.20 \times 0.90 = 0.918\)
Geometric mean \(= \sqrt[3]{0.918} = 0.97188...\)
Average yearly change \(= 0.97188 - 1 = -0.02812\), which is -2.81% (a decrease of 2.81% each year)

Explanation

The overall effect of the three changes is a multiplier of 0.918, an 8.2% fall, and a fall of 2.81% each year gives the same result (\(0.97188^3 = 0.918\)). Jamie's arithmetic mean of the percentages (-1.67% a year) would give only about a 4.9% fall. The geometric mean cannot be found from the percentage changes themselves because some are negative, so always use the multipliers.

Mark scheme
  1. 1 mark

    M1 for 0.85 × 1.2 × 0.9 (= 0.918)

    oe. All three multipliers must be used; the product 0.918 is exact. Any attempt to find the geometric mean of -15, 20 and -10 directly scores M0.

  2. 1 mark

    M1dep for \(\sqrt[3]{0.85 \times 1.2 \times 0.9}\) or \(\sqrt[3]{0.918}\) (= 0.9718...)

    oe. The value of the geometric mean need not be seen for this mark (0.97188...). Rounding it to 0.972 before subtracting 1 gives -2.80, which is outside the final range: M1M1A0.

  3. 1 mark

    A1 for -2.81 [-2.815, -2.805] or a decrease of 2.81%

    Accept more accurate values in the range, eg -2.812. 2.81 with no minus sign and no indication of a decrease scores M1M1A0. 0.9719 (the multiplier) not converted scores M1M1A0. Correct answer with no working scores full marks.

Question 4

4 marks

To get a distinction on a course, a student's weighted mean mark must be at least 75.
The coursework has a weight of 40 and the exam has a weight of 60.

Amir scored 70 in the coursework.
Exam marks are whole numbers.

Work out the lowest exam mark Amir needs to get a distinction.

Model answer

Total weight = 40 + 60 = 100
Weighted mean of at least 75 needs a total of at least 75 × 100 = 7500
Coursework: 40 × 70 = 2800
\(60e \ge 7500 - 2800 = 4700\)
\(e \ge 4700 \div 60 = 78.3...\)
Exam marks are whole numbers, so the lowest mark is 79.
(Check: 78 gives (2800 + 4680) ÷ 100 = 74.8; 79 gives (2800 + 4740) ÷ 100 = 75.4)

Explanation

Work backwards from the target weighted mean to the exam mark, which comes out as 78.3. Because the mark must be a whole number and the weighted mean must be at least 75, round up to 79, not to the nearest whole number. Checking 78 and 79 in the weighted mean confirms the answer.

Mark scheme
  1. 1 mark

    M1 for 75 × (40 + 60) or 7500

    oe, eg 0.4 × 70 + 0.6e = 75 implies M1M1

  2. 1 mark

    M1 for 40 × 70 or 2800

    oe, eg 0.4 × 70 = 28

  3. 1 mark

    M1dep for (7500 - 2800) ÷ 60 or 78.3(...)

    oe, eg (75 - 28) ÷ 0.6

  4. 1 mark

    A1 for 79

    78 or 78.3 as the final answer scores M1M1M1A0 (a mark of 78 gives a weighted mean of 74.8, which is less than 75). Correct answer with no working scores full marks. Trial and improvement can be used, but the final answer must be correct for any marks. 80 from (70 + e) ÷ 2 = 75 (ignoring the weights) scores M0M0M0A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.