Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Estimating population characteristics from samples

Practise 16 exam-style questions on Estimating population characteristics from samples for AQA GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A parcel depot weighed a random sample of 200 parcels.
For the parcels in the sample, the median mass was 1.8 kg and the upper quartile was 2.6 kg.

The depot handles about 4800 parcels each day.

Estimate the number of parcels handled each day that have a mass between 1.8 kg and 2.6 kg.

Model answer

The median and the upper quartile have one quarter (25%) of the sample between them.
Assuming the sample is representative, about 25% of all the parcels have a mass between 1.8 kg and 2.6 kg.
Estimate \(= 0.25 \times 4800 = 1200\) parcels

Explanation

The quartiles and the median split the sample into four quarters, so 25% of the sampled parcels have masses between the median and the upper quartile. This sample proportion is used as the estimate for all the parcels, then multiplied by 4800. Using 50%, or answering with a quarter of the sample size instead of the daily total, are common errors.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{1}{4} \times 4800\) oe

    oe, eg \(0.25 \times 4800\), \(4800 \div 4\) or 25% of 4800. Implied by 1200.

  2. 1 mark

    A1 for 1200

    Correct answer with no working scores M1A1. 2400 (using 50% instead of 25%) scores M0A0. 50 (a quarter of the sample of 200) scores M0A0.

Question 2

2 marks

Tara wants to estimate the mean number of hours of exercise that adults in her town do each week.
She asks 60 adults as they leave a gym.

Explain why her estimate is likely to be unreliable, and say whether it is likely to be too high or too low.

Model answer

The sample is not representative of all adults in the town: people who are leaving a gym are likely to exercise more than adults who do not go to a gym.
So her estimate of the mean is likely to be too high.

Explanation

An estimate of a population mean is only reliable if the sample represents the population. Choosing people at a gym over-represents people who exercise a lot, which biases the estimate upwards. Saying only that the sample is 'biased' without explaining why does not earn the mark.

Mark scheme
  1. 1 mark

    B1 for the sample is not representative (biased) because adults leaving a gym are likely to do more exercise than other adults in the town

    oe. Must give a reason linked to the gym. 'The sample is biased' or 'not random' with no reason scores B0. 'The sample is too small' scores B0.

  2. 1 mark

    B1 for the estimate is likely to be too high

    oe. Accept 'it will overestimate the mean'. 'Too low' scores B0.

Question 3

3 marks

Two random samples of phones of one type are tested to find their battery life.

Sample A: 30 phones, mean battery life 12.4 hours
Sample B: 50 phones, mean battery life 11.6 hours

Use both samples to work out the best estimate of the mean battery life of all phones of this type.

Model answer

Total for Sample A \(= 30 \times 12.4 = 372\) hours
Total for Sample B \(= 50 \times 11.6 = 580\) hours
Combined mean \(= \dfrac{372 + 580}{30 + 50} = \dfrac{952}{80} = 11.9\) hours

Explanation

Combining the samples gives one sample of 80 phones, which is more reliable than either sample alone. Because the samples are different sizes, the combined mean must be weighted by the sample sizes: find each total, add, and divide by 80. Simply averaging 12.4 and 11.6 gives 12, which gives too much weight to the smaller sample.

Mark scheme
  1. 1 mark

    M1 for \(30 \times 12.4\) or \(50 \times 11.6\) (372 or 580)

    oe

  2. 1 mark

    M1dep for \((372 + 580) \div 80\)

    oe, eg \(\dfrac{30 \times 12.4 + 50 \times 11.6}{30 + 50}\)

  3. 1 mark

    A1 for 11.9 (hours)

    Correct answer with no working scores M1M1A1. \((12.4 + 11.6) \div 2 = 12\) scores M0M0A0. Using only Sample B (11.6) scores M0M0A0.

Question 4

4 marks

A factory makes 5000 bolts each day.
Jamie tests a random sample of 20 bolts from one day. He finds 3 faulty bolts.
Kara tests a random sample of 200 bolts from the same day. She finds 18 faulty bolts.

Work out an estimate of the number of faulty bolts made that day, using Jamie's sample and using Kara's sample.
Which estimate should the manager use? Explain why the two estimates are so different.

Model answer

Jamie: \(\dfrac{3}{20} = 15\%\), so the estimate is \(0.15 \times 5000 = 750\) faulty bolts.
Kara: \(\dfrac{18}{200} = 9\%\), so the estimate is \(0.09 \times 5000 = 450\) faulty bolts.
The manager should use Kara's estimate, because a larger sample gives a more reliable estimate.
The estimates are very different because Jamie's sample is so small: each faulty bolt is 5% of his sample, so finding just one or two extra faulty bolts by chance changes his estimate by hundreds.

Explanation

Both samples are random, so the difference comes from sampling variability, which is much larger for small samples. In a sample of 20, one bolt changes the percentage by 5 percentage points; in a sample of 200, by only 0.5. Larger samples give estimates that are more reliable and more likely to be replicated.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{3}{20} \times 5000\) or \(\dfrac{18}{200} \times 5000\) oe

    oe, eg \(0.15 \times 5000\) or \(0.09 \times 5000\)

  2. 1 mark

    A1 for 750 and 450

    Both needed.

  3. 1 mark

    B1 for Kara's estimate (450), because her sample is larger so it is more reliable

    oe. Accept use of the combined sample (21 out of 220, about 477) with the reason that it is the largest sample. Kara with no reason scores B0.

  4. 1 mark

    B1 for an explanation of the difference, eg in a sample of 20 each faulty bolt is 5% of the sample, so one or two extra faulty bolts changes the estimate a lot / small samples vary more

    oe. Accept 'Jamie's sample is small, so by chance it could contain more faulty bolts than usual'. Do not accept 'Jamie made a mistake' or 'Jamie's sample is biased' with no reason. Ignore any non-contradictory or irrelevant statements.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.