Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Primary and secondary data, reliability, validity and bias

Practise 16 exam-style questions on Primary and secondary data, reliability, validity and bias for AQA GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Ffion uses data from a government website in her statistics project.

Give one reason why Ffion should state the source of the data in her project.

Model answer

So that anyone reading her project can find and check the original data, and judge for themselves how reliable the source is.

Explanation

Sources of secondary data should always be acknowledged. It lets readers check the data and judge how reliable they are, and it gives credit to whoever collected them.

Mark scheme
  1. 1 mark

    B1 for a valid reason, eg so that readers can find and check the original data / so that readers can judge how reliable the source is / to give credit to the people who collected the data (and avoid plagiarism or breaking copyright)

    oe. Do not accept 'because it is secondary data' (this only restates the situation) or 'so that the data are correct'.

Question 2

2 marks

A road safety researcher wants to test whether a new design of reflective jacket makes cyclists easier for drivers to see at night. She will measure the distance at which each driver first sees a person wearing the jacket.
She could carry out
- a laboratory experiment, in a large, dark indoor test hall, with each volunteer driver sitting in a car with its headlights on, or
- a field experiment, with each volunteer driver driving slowly along a quiet road at night.

Give one advantage of the laboratory experiment and one advantage of the field experiment.

Model answer

Laboratory: the darkness, the headlights and the weather can be kept the same for every driver, so any difference in the distance at which the jacket is first seen is more likely to be due to the jacket.
Field: the drivers see the jacket in real night-time conditions, with street lights, other traffic and changing weather, so the results show how easy the jacket is to see on real roads.

Explanation

Laboratory experiments give more control over extraneous variables, which makes the results more reliable and the comparison fairer. Field experiments take place in real-world settings, so the results are more realistic, but other factors such as the weather and other lights are harder to control. A reason such as 'it is more accurate' or 'it is outside' earns nothing unless it says why that matters.

Mark scheme
  1. 1 mark

    B1 for laboratory: the conditions can be controlled and kept the same for every driver (eg the darkness, the headlights, no rain, no street lights or other traffic), so any difference in the distances is more likely to be caused by the jacket / it is easier to repeat in identical conditions / it is safer, because there is no real traffic

    oe. Accept 'the weather cannot affect the results'. Do not accept 'it is more accurate' or 'it is more reliable' with no reason, or 'it is indoors' with no reason.

  2. 1 mark

    B1 for field: the conditions are realistic (eg street lights, other vehicles' lights, rain, a moving car), so the results are more likely to show how easy the jacket is to see on real roads (more valid) / drivers behave as they normally do

    oe. Do not accept 'it is outside' or 'it is real' with no further reason, or 'it is cheaper' with no reason.

Question 3

3 marks

Dylan wants to measure how much exercise Year 9 students at his school do each week.
He asks each student 'How many PE lessons do you have each week?'
Every student answers '2'.

Comment on the reliability and the validity of Dylan's method.
Suggest how he could improve it.

Model answer

Dylan's method is reliable: the answers are consistent, and every student would give the same answer again because PE lessons are fixed by the timetable.
But it is not valid: the number of PE lessons does not measure how much exercise students actually do - it ignores sport, walking and cycling outside school, and how active students are in lessons.
He should ask each student to record the number of minutes of exercise they do each day for a week, in and out of school (or use activity trackers).

Explanation

A method can be reliable (consistent) without being valid (measuring the right thing). Here the answers never change, but they tell Dylan nothing about how much exercise each student does. Improving validity means measuring the variable in the question directly.

Mark scheme
  1. 1 mark

    B1 for it is reliable: the answers are consistent - every student gives the same answer and would give it again if asked (it is fixed by the timetable)

    oe. Accept 'reliable, because the results are consistent'. Do not accept 'reliable because it is accurate'.

  2. 1 mark

    B1 for it is not valid: the number of PE lessons does not measure the amount of exercise students actually do, eg it ignores exercise outside PE (sports clubs, walking, cycling) and how active students are in lessons

    oe

  3. 1 mark

    B1 for a suitable improvement, eg ask each student how many minutes of exercise they did in the last 7 days, in and out of school / ask students to keep an exercise diary for a week / use activity trackers for a week

    oe. Must measure the amount of exercise (time or activity) over a stated period. Do not accept 'ask more students'.

Question 4

4 marks

Amira wants to test the hypothesis

'Drivers who live in Town A pay more for their car insurance than drivers who live in Town B.'

She considers two ways of collecting data.

Option 1: ask 50 drivers in a car park in each town how much they paid for their car insurance this year.
Option 2: use a price comparison website to find the cheapest quote for the same car and the same driver details, changing only the home address, for 20 different streets in each town.

Evaluate the two options and recommend which one Amira should use.

Model answer

Option 1: it gives the prices that real drivers actually paid. But the price of insurance also depends on the driver's age, experience and claims and on the car, so a difference between the towns may not be caused by where people live. Some drivers will not remember the amount, and some people in a car park may not live in that town.
Option 2: it is quick and cheap, and because the car and the driver details are the same, any difference in the quotes is due to the address. However, quotes are not prices actually paid, and the results are for one driver and one car only, so they may be different for other drivers, such as young drivers.
Recommendation: Option 2, because it controls the other variables that affect the price, so the two towns are compared fairly.

Explanation

When choosing a data source, weigh up whether it measures the right variable, whether other variables are controlled so that the comparison is fair, practical issues such as time and cost, and sensitivity. A good evaluation gives points for and against each option and then makes a reasoned choice that is consistent with those points.

Mark scheme
  1. 1 mark

    B1 for a valid point (an advantage or a disadvantage) about Option 1, in context, eg disadvantage: the price of insurance also depends on the driver's age, driving experience and claims and on the car, so a difference between the towns may not be caused by where the drivers live (the prices are not comparable) / drivers may not remember the exact amount, or may not want to say / drivers in a car park may not live in that town / it is time consuming / one car park may not be typical of the drivers in the town; advantage: it gives the prices that drivers actually paid / it includes many different drivers and cars

    oe. Each of the four marks needs a different point in context. Do not accept 'the website might be unreliable' or 'it is biased' with no reason, or 'people might lie' with no reason. Do not accept 'the sample is too small'. Ignore any non-contradictory or irrelevant statements.

  2. 1 mark

    B1 for a valid point (an advantage or a disadvantage) about Option 2, in context, eg advantage: the car and the driver details are kept the same, so any difference in price is due to where the driver lives (other variables are controlled) / it is quick, easy or cheap / nobody has to give personal information; disadvantage: quotes are not the prices that drivers actually pay / only one driver and one car are used, so the results may be different for other drivers (eg young drivers) or other cars / the website may not include every insurer

    oe. Do not accept generic comments such as 'websites are unreliable' with no reason.

  3. 1 mark

    B1 for a further valid point about either option, different from the points already credited

    oe. See the lists in the previous two mark points. 'Quick', 'easy' and 'cheap' count as one point.

  4. 1 mark

    B1 for a recommendation with a valid reason that is consistent with their evaluation, eg Option 2, because everything except the address is kept the same, so a difference in the quotes must be due to the town

    Either option may be recommended if the reason is valid and consistent, eg 'Option 1, because it uses the prices real drivers in each town actually pay' is acceptable. A recommendation with no reason scores B0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.