Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Range, quartiles, percentiles and interdecile range

Practise 16 exam-style questions on Range, quartiles, percentiles and interdecile range for AQA GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The lowest temperatures, in °C, at a weather station on seven nights in January were

3   -2   -5   1   0   -1   4

Work out the range of these temperatures.

Model answer

Highest = 4 °C, lowest = -5 °C
Range \(= 4 - (-5) = 9\) °C

Explanation

The range is the highest value minus the lowest value. With negative numbers, take care: subtracting -5 is the same as adding 5, so the range is 9 °C. A range is never negative.

Mark scheme
  1. 1 mark

    B1 for 9 (°C)

    4 - (-5) = 9. Do not accept -9. -1 (from 4 - 5) or 1 (from 3 - 2, using the first two values) scores B0.

Question 2

2 marks

The table shows information about the times, \(t\) minutes, taken by 100 runners to complete a 5 km fun run.

Work out an estimate of the 90th percentile of the times.

Table with columns "Time, t (minutes)", "Frequency". Time, t (minutes): 20 < t ≤ 25; Frequency: 6 | Time, t (minutes): 25 < t ≤ 30; Frequency: 18 | Time, t (minutes): 30 < t ≤ 35; Frequency: 30 | Time, t (minutes): 35 < t ≤ 40; Frequency: 24 | Time, t (minutes): 40 < t ≤ 50; Frequency: 16 | Time, t (minutes): 50 < t ≤ 60; Frequency: 6.

Model answer

Cumulative frequencies: 6, 24, 54, 78, 94, 100
The 90th percentile is the 90th value, which is in the class \(40 < t \le 50\).
90th percentile \(\approx 40 + \dfrac{90 - 78}{16} \times 10 = 40 + 7.5 = 47.5\) minutes

Explanation

The pth percentile of n grouped values is at position \(\dfrac{p}{100} \times n\), here the 90th value. Use the cumulative frequencies to find the class, then interpolate: 12 of the 16 runners in that class are needed, so go \(\dfrac{12}{16}\) of the way through the 10-minute class. It is an estimate because the exact times are not known.

Mark scheme
  1. 1 mark

    M1 for \(40 + \dfrac{90 - 78}{16} \times 10\) oe

    oe, eg \(40 + \dfrac{12}{16} \times 10\). Using the 90.9th value, \(40 + \dfrac{12.9}{16} \times 10\), is also M1.

  2. 1 mark

    A1 for 47.5 [47.5, 48.1] (minutes)

    47.5 from the 90th value; 48.06 from the 90.9th value (both positions are accepted, which is why the range is wider than one rounding unit). The class midpoint 45 and the class end 50 are outside the range. Correct answer with no working scores M1A1. '40 < t ≤ 50' (the class) with no value scores M0A0.

Question 3

3 marks

The cumulative frequency graph shows information about the marks of 120 students in a test.

Kai's mark in the test was 48.
Kai's mark was at the \(p\)th percentile of the marks.

Use the graph to work out an estimate of the value of \(p\).

Cumulative frequency graph on a grid of small squares. The horizontal axis is "Mark", from 0 to 60, numbered every 10, with 10 small squares between numbered values (each small square is 1). The vertical axis is "Cumulative frequency", from 0 to 120, numbered every 20, with 10 small squares between numbered values (each small square is 2). A smooth curve starts at (0, 0) and passes through (10, 4), (20, 14), (30, 36), (40, 72), (50, 102) and (60, 120) (each point is marked with a cross).

Model answer

Reading up from 48 on the mark axis to the curve and across gives a cumulative frequency of about 97.
So about 97 of the 120 students scored 48 or less.
\(\dfrac{97}{120} \times 100 = 80.8\)%
Kai's mark was at about the 81st percentile, so \(p \approx 81\).

Explanation

The pth percentile is the value below which p% of the data lie. So read across from the mark to the curve to find how many students scored 48 or less, then write that number as a percentage of the 120 students. A common error is to give the cumulative frequency itself as the percentile, which only works when there are exactly 100 values.

Mark scheme
  1. 1 mark

    M1 for reading the graph at a mark of 48 to give a cumulative frequency in the range [94, 100]

    The curve gives about 97 at a mark of 48 (on the graph one small square is 1 mark across and 2 students up). A reading may be seen on the graph or in the working. Joining the plotted points (40, 72) and (50, 102) with a straight line gives 96, which is also accepted.

  2. 1 mark

    M1dep for their reading ÷ 120 (× 100)

    oe, eg \(\dfrac{97}{120} \times 100\)

  3. 1 mark

    A1 for 81 (80.8...) [78, 84]

    Accept 'the 81st percentile' or any value in the range, eg 80 or 80.8. Correct answer with no working scores full marks. Giving the cumulative frequency itself (about 97) as the percentile scores M1M0A0. 19 or 20 (the percentage of students who scored more than 48) scores M1M0A0.

Question 4

5 marks

The table shows information about the annual salaries, \(s\) thousand pounds, of the 80 employees of a company.

Work out an estimate of the interdecile range between the 1st and 9th deciles of the salaries.

Give a reason why the interdecile range is a better measure of spread than the range for these salaries.

Table with columns "Salary, s (thousand pounds)", "Frequency". Salary, s (thousand pounds): 15 < s ≤ 20; Frequency: 8 | Salary, s (thousand pounds): 20 < s ≤ 25; Frequency: 20 | Salary, s (thousand pounds): 25 < s ≤ 30; Frequency: 24 | Salary, s (thousand pounds): 30 < s ≤ 40; Frequency: 16 | Salary, s (thousand pounds): 40 < s ≤ 60; Frequency: 8 | Salary, s (thousand pounds): 60 < s ≤ 100; Frequency: 4.

Model answer

Cumulative frequencies: 8, 28, 52, 68, 76, 80
1st decile: 10% of 80 = 8th value. The first class holds exactly 8 salaries, so the 1st decile is at its upper boundary: 20 thousand pounds.
9th decile: 90% of 80 = 72nd value, in the class \(40 < s \le 60\):
\(40 + \dfrac{72 - 68}{8} \times 20 = 40 + 10 = 50\) thousand pounds
Interdecile range = 50 - 20 = 30 thousand pounds (£30 000)
The range would be heavily affected by the few very high salaries (the top class goes up to £100 000), but the interdecile range ignores the highest and lowest 10% of salaries.

Explanation

The deciles are at 10% and 90% of the 80 values, the 8th and 72nd. Interpolate within each class using the cumulative frequencies; the 8th value is exactly at the end of the first class. Salaries usually include a few very high values, and the interdecile range measures the spread of the middle 80%, so it is not distorted by them.

Mark scheme
  1. 1 mark

    M1 for the positions 8 and 72 (10% and 90% of 80), or the 1st decile in the class \(15 < s \le 20\) and the 9th decile in the class \(40 < s \le 60\)

    Positions 8.1 and 72.9 are also acceptable.

  2. 1 mark

    A1 for 1st decile = 20 (£20 000)

    Accept [20, 20.03] (20.025 from the 8.1th value).

  3. 1 mark

    A1 for 9th decile = 50 (£50 000)

    From \(40 + \dfrac{72 - 68}{8} \times 20\). Accept [50, 52.25] (52.25 from the 72.9th value). Requires the M1.

  4. 1 mark

    A1ft for interdecile range = 30 (thousand pounds) / £30 000

    ft their 9th decile - their 1st decile, provided the M1 is awarded. Accept [30, 32.3] thousand pounds: 30 from the 8th and 72nd values, 32.2 from the 8.1th and 72.9th values (both positions are accepted, which is why the range is wide). Using the class midpoints, 50 - 17.5 = 32.5, or the class ends, 60 - 15 = 45, is not interpolation and is outside the range. Correct answer with no working scores the first four marks.

  5. 1 mark

    B1 for a reason specific to these salaries, eg the range would be affected by the few very high salaries (up to £100 000), but the interdecile range ignores the top and bottom 10% / the range cannot be found exactly because the lowest and highest salaries are not known

    oe. Must refer to the extreme (very high or very low) salaries or to the exact salaries not being known from the table. 'The interdecile range is more accurate' or 'it uses more of the data' scores B0. Ignore any non-contradictory or irrelevant statements.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.