Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Weighted mean, geometric mean and choosing an average

Practise 16 exam-style questions on Weighted mean, geometric mean and choosing an average for AQA GCSE Statistics (Higher Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A factory has two machines, A and B, that fill bags of flour.
One day, the mean mass of the bags filled by Machine A was 498 g and the mean mass of the bags filled by Machine B was 506 g.
The mean mass of all the bags filled by the two machines that day was 502 g.

What does this tell you about the numbers of bags filled by the two machines that day?
Give a reason for your answer.

Model answer

The overall mean of 502 g is a weighted mean of 498 g and 506 g, weighted by the numbers of bags.
502 is exactly halfway between 498 and 506 (502 - 498 = 4 and 506 - 502 = 4), so the two means have equal weights.
So the two machines filled the same number of bags that day.

Explanation

The mean of two groups together is a weighted mean of the two group means, so it is pulled towards the mean of the larger group. It is exactly halfway between the group means only when the groups are the same size. If Machine B had filled more bags, the overall mean would have been closer to 506 g.

Mark scheme
  1. 1 mark

    B1 for the two machines filled the same number of bags, with a reason, eg the overall mean (502 g) is exactly halfway between 498 g and 506 g, so the two means must have equal weights

    oe. Accept a correct algebraic reason, eg 498a + 506b = 502(a + b) gives 4b = 4a, so a = b. 'They filled the same number of bags' with no reason scores B0. 'Machine A filled more bags' or 'Machine B filled more bags' scores B0. Ignore any non-contradictory or irrelevant statements.

Question 2

2 marks

A school is holding a party for 240 students.
At a similar party, the amounts of pasta eaten by a sample of 40 students were recorded.

mean = 165 g   median = 150 g   mode = 120 g

The caterer wants to use one of these averages to estimate the total amount of pasta needed for the 240 students.

Which average should she use? Give a reason for your choice.
Work out an estimate of the total amount of pasta needed. Give your answer in kg.

Model answer

She should use the mean, because the mean is the total amount shared equally between the students, so mean × number of students gives the total.
Total \(\approx 240 \times 165 = 39600\) g = 39.6 kg

Explanation

When an average is used to work out a total, it must be the mean, because mean = total ÷ number, so total = mean × number. The median or the mode would underestimate the pasta needed here, because some students eat much more than a typical amount, and those larger amounts are part of the total.

Mark scheme
  1. 1 mark

    B1 for the mean with a reason, eg the mean × the number of students gives the total amount / the mean is the total amount shared out equally

    oe. Both the choice and a reason linked to finding the total are needed. 'The mean, because it uses all the values' with no link to the total scores B0. Choosing the median or the mode scores B0. Ignore any non-contradictory or irrelevant statements.

  2. 1 mark

    B1 for 39.6 (kg)

    240 × 165 = 39 600 g = 39.6 kg. 39 600 not converted to kg scores B0. 36 kg (from the median) or 28.8 kg (from the mode) scores B0.

Question 3

3 marks

The numbers of visitors to two museums changed over the same three years.

Museum A: +4% in each of the three years
Museum B: +9% in the first year, -2% in the second year, +5% in the third year

For both museums, the arithmetic mean of the three yearly percentage changes is +4%.

Use geometric means to decide which museum's visitor numbers grew at the greater average yearly rate.

Model answer

Museum B: multipliers 1.09, 0.98, 1.05
Product \(= 1.09 \times 0.98 \times 1.05 = 1.12161\)
Geometric mean \(= \sqrt[3]{1.12161} = 1.0390\), an average increase of 3.90% per year
Museum A: the multiplier is 1.04 every year, so its geometric mean is 1.04, an average increase of 4% per year
Museum A's visitor numbers grew at the greater average yearly rate (4% compared with 3.90%), even though the two museums have the same arithmetic mean change.

Explanation

Percentage changes compound, so the arithmetic mean of the percentages is misleading: Museum B's 2% fall is taken from a larger number than its 9% rise was applied to. The geometric mean of the multipliers gives the constant yearly rate with the same overall effect. Museum A's steady 4% beats Museum B's average of 3.90%, even though both have an arithmetic mean of 4%.

Mark scheme
  1. 1 mark

    M1 for 1.09 × 0.98 × 1.05 (= 1.12161)

    oe. All three multipliers must be used (1.12161 is exact). Using the percentages themselves, eg \(\sqrt[3]{9 \times (-2) \times 5}\), scores M0.

  2. 1 mark

    M1dep for \(\sqrt[3]{1.12161}\) (= 1.0390) oe

    oe, eg \(1.12161^{\frac{1}{3}}\). Comparing \(1.04^3\) (= 1.124864) with 1.12161 without finding a geometric mean scores M1M0A0, because the question says use geometric means. Museum A's geometric mean is 1.04 (no working needed for it).

  3. 1 mark

    A1 for Museum B's average is 3.9(0)% per year (geometric mean 1.039), which is less than 4%, so Museum A's visitor numbers grew at the greater average rate

    Accept [3.89, 3.9]% or a geometric mean in [1.0389, 1.039] with the conclusion that Museum A grew faster on average. A conclusion with no value, or a value with no conclusion, scores A0. Correct value with the full conclusion and no working scores full marks.

Question 4

4 marks

The price of a yearly bus pass in a town increased by 6% each year for 3 years.
It then increased by 2% each year for the next 2 years.

Use the geometric mean to work out the average yearly percentage increase over the 5 years.
Give your answer to 2 decimal places.

Model answer

Overall multiplier \(= 1.06^3 \times 1.02^2 = 1.191016 \times 1.0404 = 1.239133...\)
Geometric mean \(= \sqrt[5]{1.239133...} = 1.043815...\)
Average yearly increase = 4.38% (to 2 decimal places)

Explanation

There are five yearly multipliers: 1.06 three times and 1.02 twice, so multiply them all together and take the fifth root. The arithmetic mean of the five percentages (4.4%) is too high: 4.4% a year for 5 years would give a bigger overall increase than the real one. Rounding the product too early also pushes the answer out of the accepted range.

Mark scheme
  1. 1 mark

    M1 for \(1.06^3\) (= 1.191016) oe

    oe, eg 1.06 × 1.06 × 1.06 (1.191016 is exact)

  2. 1 mark

    M1 for \(1.02^2\) (= 1.0404) oe

    oe, eg 1.02 × 1.02 (1.0404 is exact)

  3. 1 mark

    M1dep for \(\sqrt[5]{1.06^3 \times 1.02^2}\) or \(\sqrt[5]{1.2391...}\) (= 1.0438) oe

    Depends on both of the first two M marks. The product is 1.2391330... Accept the geometric mean as 1.0438 or better. Rounding the product to 1.24 first gives 4.40%, which is outside the range: M1M1M1A0.

  4. 1 mark

    A1 for 4.38 [4.375, 4.385] (%)

    Accept more accurate values in the range, eg 4.3815. Correct answer with no working scores full marks. 4.4 (the arithmetic mean of 6, 6, 6, 2 and 2) scores M0M0M0A0. \(\sqrt{1.06 \times 1.02}\) (3.98%, ignoring the numbers of years) scores M0M0M0A0. 1.0438 (the multiplier) not converted scores M1M1M1A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.