Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Statistics (Higher Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Planning and collecting data
Unit 2
Representing data
Section C: C1a (tabulation, tally, pictogram); Section E: E3d
Tabulation, tallies, pictograms and tables of data
Section C: C1a (pie chart), C1b (comparative pie chart)
Pie charts and comparative pie charts
Section C: C1a (stem and leaf diagram)
Stem and leaf diagrams
Section C: C2 (bar charts, bar line charts, line charts, frequency polygons)
Bar charts, line charts and frequency polygons
Section C: C2 (cumulative frequency charts)
Cumulative frequency diagrams
Section C: C2 (histograms), C3b
Histograms and frequency density
Section C: C2 (box plots); Section D: D3b; Section E: E5b
Box plots and outliers
Unit 3
Summarising data
Section D: D1a (mode, median, arithmetic mean)
Mode, median and mean
Section D: D1a (weighted mean, geometric mean), D1b
Weighted mean, geometric mean and choosing an average
Section D: D2; Section E: E5a
Skewness
Section D: D3a (range, quartiles, IQR, percentiles, interpercentile and interdecile range)
Range, quartiles, percentiles and interdecile range
Section D: D3a (standard deviation)
Standard deviation
Section C: C2 (time series); Section D: D1a (mean seasonal variation), D4; Section E: E6
Time series, moving averages and seasonal variation
Section C: C2 (scatter charts); Section D: D5
Scatter diagrams, lines of best fit and regression lines
Section D: D6; Section E: E9a, E9b, E9c
Spearman's rank correlation coefficient
Unit 4
Probability
Unit 5
Interpreting and evaluating results
Unit 6
Statistical enquiry cycle
3.6 Statistical enquiry cycle: 3.6.1 Initial planning, 3.6.2 Data collection
Statistical enquiry cycle: planning and data collection
3.6 Statistical enquiry cycle: 3.6.3 Processing and presentation, 3.6.4 Interpretation, 3.6.5 Evaluation
Statistical enquiry cycle: analysis and evaluation
Avg
score:
–
Topics
done:
0/39

Normal distribution, quality assurance and standardising

Practise 18 exam-style questions on Normal distribution, quality assurance and standardising for AQA GCSE Statistics (Higher Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The lengths of the bananas grown on a plantation are Normally distributed.
The lower quartile of the lengths is 17.5 cm and the median is 19.0 cm.

Estimate the upper quartile of the lengths.

Model answer

A Normal distribution is symmetrical about its centre, so the upper quartile is the same distance above the median as the lower quartile is below it.
\(19.0 - 17.5 = 1.5\) cm
Upper quartile \(= 19.0 + 1.5 = 20.5\) cm

Explanation

In a Normal distribution the mean, median and mode are equal and the distribution is symmetrical about them. So the quartiles are equally spaced either side of the median. No standard deviation is needed.

Mark scheme
  1. 1 mark

    B1 for 20.5 (cm)

    From \(19.0 + (19.0 - 17.5)\). Correct answer with no working scores B1. 19.0 + 17.5 or 36.5 scores B0.

Question 2

2 marks

A builders' merchant sells bags of sand labelled 25 kg.
The masses of the sand in the bags are Normally distributed with a standard deviation of 0.3 kg.

The merchant wants about 97.5% of the bags to contain at least 25 kg of sand.

Work out the mean mass that the bags should be filled to.

Model answer

About 95% of masses are within 2 standard deviations of the mean, so 2.5% are more than 2 standard deviations below it and 97.5% are above mean \(- 2\) standard deviations.
So mean \(- 2 \times 0.3 = 25\)
Mean \(= 25 + 0.6 = 25.6\) kg

Explanation

If 97.5% of the bags must contain at least 25 kg, only the bottom 2.5% may be below it, and the bottom 2.5% of a Normal distribution lies more than 2 standard deviations below the mean. So the mean must be 2 standard deviations (0.6 kg) above 25 kg. Filling the bags to a mean of 25 kg would make about half of them underweight.

Mark scheme
  1. 1 mark

    M1 for recognising that 25 kg must be 2 standard deviations below the mean, eg \(25 + 2 \times 0.3\)

    oe. Accept 'mean \(- 2 \times 0.3 = 25\)'. Implied by 25.6

  2. 1 mark

    A1 for 25.6 (kg)

    Accept 25 600 g. Correct answer with no working scores M1A1. 25.3 (1 standard deviation) scores M0A0; 25.9 (3 standard deviations) scores M0A0; 24.4 (subtracting) scores M0A0.

Question 3

3 marks

An angling shop can buy fishing line from Supplier A or Supplier B.
The breaking strain is the mass that a line can hold before it breaks.

Supplier A: breaking strains are Normally distributed with a mean of 11 kg and a standard deviation of 0.5 kg.
Supplier B: breaking strains are Normally distributed with a mean of 12 kg and a standard deviation of 2 kg.

The shop wants as many lines as possible to hold at least 10 kg.

Which supplier should the shop choose?
You must show your working.

Model answer

Supplier A: \(11 - 2 \times 0.5 = 10\), so 10 kg is 2 standard deviations below the mean. About 2.5% of A's lines break below 10 kg, so about 97.5% hold at least 10 kg.
Supplier B: \(12 - 2 = 10\), so 10 kg is 1 standard deviation below the mean. About 16% of B's lines break below 10 kg, so about 84% hold at least 10 kg.
The shop should choose Supplier A: a greater proportion of its lines hold at least 10 kg, even though B's mean is higher.

Explanation

For a requirement like 'at least 10 kg', the spread matters as much as the mean. Find how many standard deviations 10 kg is below each mean, then use the 68% and 95% facts and symmetry to find the proportion below it. Supplier B's lines are stronger on average but much more variable, so more of them are weak.

Mark scheme
  1. 1 mark

    M1 for 10 kg is 2 standard deviations below the mean for Supplier A (\(11 - 2 \times 0.5\)) or 1 standard deviation below the mean for Supplier B (\(12 - 2\))

    oe, eg standardised scores \(\dfrac{10 - 11}{0.5} = -2\) or \(\dfrac{10 - 12}{2} = -1\)

  2. 1 mark

    A1 for 97.5% (A) and 84% (B) hold at least 10 kg, or 2.5% (A) and 16% (B) break below 10 kg

    oe. Accept 97.5% in [97.5, 97.75] and 84% in [83.3, 84.2], or the matching percentages below 10 kg.

  3. 1 mark

    B1 for Supplier A, with a correct comparison, eg 97.5% of A's lines hold at least 10 kg compared with only 84% of B's

    oe. Award only if both percentages (or both percentages below 10 kg) are seen and are correct. Choosing B because its mean is higher scores B0. The question says 'You must show your working': 'A' with no working scores 0.

Question 4

4 marks

All the students in a year group took the same test.

Kofi scored 62 marks. His standardised score was 0.5
Dina scored 47 marks. Her standardised score was \(-1\)

\(\text{standardised score} = \dfrac{\text{value} - \text{mean}}{\text{standard deviation}}\)

Work out the mean and the standard deviation of the marks in the test.

Model answer

\(\dfrac{62 - \mu}{\sigma} = 0.5\), so \(62 = \mu + 0.5\sigma\)
\(\dfrac{47 - \mu}{\sigma} = -1\), so \(47 = \mu - \sigma\)
Subtracting: \(15 = 1.5\sigma\), so \(\sigma = 10\)
\(\mu = 47 + 10 = 57\)
The mean is 57 marks and the standard deviation is 10 marks.

Explanation

Each standardised score gives an equation linking the mean and the standard deviation. Kofi is 0.5 standard deviations above the mean and Dina is 1 standard deviation below it, so the 15 marks between them are 1.5 standard deviations. Check: \((62 - 57) \div 10 = 0.5\) and \((47 - 57) \div 10 = -1\).

Mark scheme
  1. 1 mark

    M1 for one correct equation, eg \(\dfrac{62 - \mu}{\sigma} = 0.5\) or \(\dfrac{47 - \mu}{\sigma} = -1\)

    oe, eg \(62 = \mu + 0.5\sigma\) or \(47 = \mu - \sigma\). Any letters may be used.

  2. 1 mark

    M1dep for eliminating one of the unknowns, eg \(62 - 47 = 0.5\sigma + \sigma\) or \(15 = 1.5\sigma\)

    oe. Accept the reasoning '62 and 47 are 1.5 standard deviations apart, so 1.5 sd = 15 marks'. Eliminating the standard deviation first is also valid, eg \(2 \times 62 + 47 = 3\mu\), so \(171 = 3\mu\).

  3. 1 mark

    A1 for standard deviation 10

  4. 1 mark

    A1 for mean 57

    Correct answers with no working score full marks. Award this mark for a mean of 57 found from correct equations, even if the standard deviation is wrong (eg when the mean is found first). A standard deviation of 30 (from \(15 \div 0.5\)) leads to a wrong mean: M1M0A0A0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.