Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA GCSE Maths (Foundation calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Ratio, proportion and rates of change
Unit 4
Geometry and measures
Unit 5
Probability
Unit 6
Statistics
Avg
score:
–
Topics
done:
0/86

Plans and elevations

Practise 20 exam-style questions on Plans and elevations for AQA GCSE Maths (Foundation calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 20 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
20 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

The diagram shows a cuboid resting on a table.

What are the dimensions of the plan of the cuboid?

Choose your answer.

  • 5 cm by 3 cm
  • 5 cm by 2 cm
  • 3 cm by 2 cm
  • 5 cm by 3 cm by 2 cm
A cuboid drawn in 3D with hidden edges shown as dashed lines. The length is labelled 5 cm (along the front bottom edge). The width (the edge going back) is labelled 3 cm (along the bottom edge going back on the right). The height is labelled 2 cm (along the front left vertical edge). The diagram is labelled "Not drawn accurately".

Model answer

5 cm by 3 cm

Explanation

The plan is the view from above, so you see the top face of the cuboid. The top face has the same length and width as the base: 5 cm by 3 cm. 5 cm by 2 cm is the front elevation, and a plan is a flat 2D drawing so it cannot have three dimensions.

Mark scheme
  1. 1 mark

    B1 for 5 cm by 3 cm

Question 2

2 marks

The diagram shows a solid made from cubes.

Jo says,
"The front elevation and the side elevation of this solid are the same."

Is Jo correct?
Give a reason for your answer.

A solid made from cubes, drawn on isometric paper: 3 cubes wide, 2 deep and up to 2 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

No.
The front elevation has columns of 1, 2 and 1 squares: it is 3 squares wide.
The side elevation has columns of 2 and 1 squares: it is only 2 squares wide.
So they are not the same.

Explanation

From the front you see the 3 columns of the solid, so the front elevation is 3 squares wide. From the side you see the 2 rows (back and front), so the side elevation is 2 squares wide. The elevations have different widths, so Jo is wrong.

Mark scheme
  1. 1 mark

    B1 for a correct description of one elevation

    front elevation: columns of 1, 2 and 1 squares (4 squares, 3 wide); side elevation: columns of 2 and 1 squares (3 squares, 2 wide)

  2. 1 mark

    B1dep for No, with a correct comparison

    e.g. the front elevation is 3 squares wide but the side elevation is 2 squares wide, or the front elevation has 4 squares and the side elevation has 3

Question 3

2 marks

The diagram shows a solid made from cubes.

Ben says,
"The side elevation of this solid has columns of 1, 2 and 3 squares from left to right."

Is Ben correct?
Give a reason for your answer.

A solid made from cubes, drawn on isometric paper: 3 cubes wide, 3 deep and up to 3 high, standing on a flat base (every stack goes down to the base). An arrow labelled "Front" points at the front of the solid and an arrow labelled "Side" points at its right-hand side.

Model answer

No.
Looking at the side in the direction of the arrow, the back of the solid is on the left and the front is on the right.
The back row is 3 cubes high, the middle row is 2 cubes high and the front row is 1 cube high.
So the columns are 3, 2 and 1 from left to right. Ben has them the wrong way round.

Explanation

When you look at the right-hand side of the solid, the back of the solid is on your left and the front is on your right. The tallest stacks are at the back, so the tallest column of the side elevation is on the left. Ben's columns are in the reverse order.

Mark scheme
  1. 1 mark

    B1 for the side elevation has columns of 3, 2 and 1 squares from left to right oe

    accept 'the tallest column should be on the left, because the back of the solid is on the left when you look at the side'

  2. 1 mark

    B1dep for No, with a correct reason

    accept 'he has drawn it the wrong way round' only with the correct order or a correct explanation of the order

Question 4

3 marks

The diagram shows the plan of a solid made from cubes.
The number in each square is the number of cubes in that stack.
The front of the solid is at the bottom of the plan.

Ella says,
"The front elevation of the solid has 11 squares."

What mistake has Ella made?
Work out the correct number of squares in the front elevation.

Drawings of a solid made from cubes, on squared paper. They are its plan, drawn on squared paper. Plan (looking down, back row at the top): ■■■ / ■■■, 6 squares, each square showing the number of cubes in its stack.

Model answer

Ella has added up all the cubes: 3 + 1 + 2 + 2 + 2 + 1 = 11.
From the front you only see the tallest stack in each column.
Left column: 3 and 2, tallest 3
Middle column: 1 and 2, tallest 2
Right column: 2 and 1, tallest 2
Front elevation = 3 + 2 + 2 = 7 squares

Explanation

From the front, a shorter stack is hidden behind (or in front of) a taller one in the same column, so you only see the height of the tallest stack in each column. 11 is the number of cubes in the whole solid, not the number of squares you can see from the front.

Mark scheme
  1. 1 mark

    B1 for she has counted all the cubes oe

    e.g. '11 is the total number of cubes' or 'the front elevation only shows the tallest stack in each column'

  2. 1 mark

    M1 for 3, 2 and 2 (the tallest stack in each column)

    or 3 + 2 + 2

  3. 1 mark

    A1 for 7

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.