Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/30

Internal energy

Practise 11 exam-style questions on Internal energy for AQA GCSE Combined Science (Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Describe what is meant by the internal energy of a system.

Model answer

Internal energy is the total kinetic energy and potential energy of all the particles (atoms and molecules) that make up the system.

Explanation

Internal energy is energy stored inside a system by its particles. It has two parts: kinetic energy, because the particles move or vibrate, and potential energy, because of the positions of the particles relative to each other. It is the total for all of the particles.

Mark scheme
  1. 1 mark

    the total kinetic energy and potential energy

    both kinetic and potential needed

  2. 1 mark

    of all the particles (atoms and molecules) that make up the system

Question 2

2 marks

Explain why the particles of a substance have more potential energy when the substance is a gas than when it is a solid.

Model answer

In a gas the particles are much further apart than in a solid. Energy has to be supplied to pull the particles apart against the attractive forces between them, so the particles in the gas have more potential energy.

Explanation

The potential energy part of internal energy depends on the positions of the particles. Separating particles that attract each other takes energy, which is stored as potential energy - this is why melting and boiling need energy even though the temperature does not change.

Mark scheme
  1. 1 mark

    in a gas the particles are much further apart

  2. 1 mark

    energy must be supplied to move the particles apart against the forces (of attraction) between them

    allow energy is needed to break the bonds between particles / to overcome the forces between particles

Question 3

3 marks

A swimming pool contains water at 25 °C. A kettle contains water at 95 °C.

A student says: "The water in the kettle has more internal energy than the water in the pool because it is at a higher temperature."

Explain why the student is wrong.

Model answer

Internal energy is the total kinetic and potential energy of all the particles in a system. The pool contains far more water, so it has far more particles than the kettle. So even though the particles in the pool have less kinetic energy on average (a lower temperature), the total energy of all of them is much greater: the pool has more internal energy.

Explanation

Temperature and internal energy are not the same thing. Temperature depends on the average kinetic energy of the particles, while internal energy is the total energy of all the particles, so it also depends on how much of the substance there is.

Mark scheme
  1. 1 mark

    internal energy is the total energy of all the particles

    allow total kinetic and potential energy of all the particles

  2. 1 mark

    the pool contains far more particles / has a much greater mass of water

  3. 1 mark

    so the pool has more internal energy, even though each particle has less kinetic energy on average / its temperature is lower

Question 4

4 marks

Two identical copper blocks are placed in contact inside an insulated box. Block P is at 80 °C and block Q is at 20 °C.

Describe and explain what happens to the internal energy of each block, and to the total internal energy of the two blocks, until they reach the same temperature.

Model answer

Energy is transferred by heating from the hotter block P to the cooler block Q. The particles in P lose kinetic energy, so the internal energy of P decreases and its temperature falls. The particles in Q gain kinetic energy, so the internal energy of Q increases and its temperature rises. Because the box is insulated, no energy is transferred to the surroundings, so the total internal energy of the two blocks stays the same. As the blocks are identical, they end up at 50 °C.

Explanation

Energy flows by heating from a hotter object to a cooler one until they are at the same temperature. One block's internal energy goes down by exactly as much as the other's goes up, so in an insulated system the total internal energy is conserved.

Mark scheme
  1. 1 mark

    energy is transferred by heating from P to Q

    max 4; allow energy is transferred from the hotter block to the colder block

  2. 1 mark

    the internal energy of P decreases (and its temperature falls)

    allow the particles in P lose kinetic energy / vibrate more slowly

  3. 1 mark

    the internal energy of Q increases (and its temperature rises)

    allow the particles in Q gain kinetic energy / vibrate faster

  4. 1 mark

    the total internal energy stays the same because the box is insulated / no energy is transferred to the surroundings

    allow energy is conserved

  5. 1 mark

    the blocks reach a final temperature of 50 °C (because they are identical)

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Internal energy

The big idea

Every substance stores energy in its particles. This store is called internal energy. Heating a substance increases its internal energy, and the energy does one of two things: it raises the temperature or it changes the state. Knowing which kind of energy the particles gain explains heating graphs, and why temperature and internal energy are not the same thing.

What internal energy is

Internal energy is the total kinetic energy and potential energy of all the particles (atoms and molecules) that make up a system.

  • Kinetic energy comes from the particles' movement. Particles in a solid vibrate about fixed positions; particles in a liquid or a gas move around. The faster they move, the more kinetic energy they have.
  • Potential energy comes from the forces between the particles, so it depends on how far apart they are. Pulling particles further apart against these forces, as happens in melting and boiling, increases their potential energy.

What heating does

Heating changes the energy stored in a system by increasing the energy of its particles, so the internal energy always increases. Where the energy goes decides what you see:

What you seeWhere the energy goesTemperature
The substance gets hotterKinetic energy of the particles: they move or vibrate fasterRises
The substance changes state (melts or boils)Potential energy of the particles: the forces between them are overcomeStays the same until the change is complete

Cooling is the reverse. Energy is transferred to the surroundings, so the internal energy decreases. As a substance cools, the kinetic energy of its particles falls. While it freezes or condenses, the potential energy of its particles falls instead, and the temperature stays constant. This is why heating and cooling graphs have flat sections (see also: Changes of state and specific latent heat).

Temperature is not internal energy

The temperature of a substance is related to the average kinetic energy of its particles. Internal energy is a total, so it also depends on:

  • the mass (the number of particles): a swimming pool at 25 °C has far more internal energy than a red-hot nail, because it has vastly more particles;
  • the state: at the same temperature, a liquid has more internal energy than the same mass of its solid, because its particles have more potential energy.

Putting samples in order

Four samples each contain 1 kg of water. A is liquid at 20 °C, B is liquid at 80 °C, C is liquid at 100 °C and D is steam at 100 °C. Put them in order of internal energy, smallest first, and explain the order.

  • A, B and C are all liquid, so the potential energy of their particles is about the same. The hotter the water, the faster its particles move and the more kinetic energy they have, so A has the least internal energy, then B, then C.
  • C and D are at the same temperature, so their particles have the same average kinetic energy. But energy had to be supplied to boil the water, so the particles of the steam have much more potential energy. D has the most internal energy.

Order: A, B, C, D.

Remember

  • Internal energy = the total kinetic energy + potential energy of all the particles in a system.
  • Heating either raises the temperature (kinetic energy increases) or changes the state (potential energy increases).
  • Temperature is linked to the average kinetic energy of the particles, not to the total energy.

Common mistakes

  • Treating temperature and internal energy as the same thing. Temperature depends on the average kinetic energy; internal energy is the total energy of all the particles.
  • Leaving "kinetic and potential" or "of all the particles" out of the definition. Both parts are needed.
  • Saying the kinetic energy increases while a solid melts. The potential energy increases; the temperature stays constant.
  • Saying no energy is supplied when the temperature stops rising. Energy is still supplied; it is changing the state.
  • Saying the particles stop moving when a substance cools. They slow down: their kinetic energy decreases.

Exam tip

Be precise about which energy you mean: the kinetic energy of the particles, the potential energy of the particles or the internal energy of the substance. Answers that just say "energy" or "heat" rarely score. Use "average" when you link kinetic energy to temperature, and "total" when you describe internal energy.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.