Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/30

Efficiency

Practise 11 exam-style questions on Efficiency for AQA GCSE Combined Science (Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 11 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
11 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

An LED lamp is supplied with 10 J of energy each second. It transfers 4.0 J of energy each second as light.

Calculate the efficiency of the lamp as a percentage.

Model answer

efficiency = useful output energy ÷ total input energy
efficiency = 4.0 ÷ 10 = 0.40
efficiency = 0.40 × 100 = 40%

Explanation

Divide the useful output (light) by the total input, then multiply by 100 to give a percentage. The other 6.0 J each second is dissipated by heating the lamp and its surroundings.

Mark scheme
  1. 1 mark

    efficiency = 4.0 ÷ 10 = 0.40

    an answer of 40 (%) scores 2 marks

  2. 1 mark

    40 (%)

    do not accept 0.40% or 40 with a unit such as J

Question 2

2 marks

A student claims that a machine he has designed has an efficiency of 1.2.

Explain why this is impossible.

Model answer

An efficiency of 1.2 means the machine's useful energy output would be 1.2 times its total energy input. This would mean energy had been created, which is impossible because energy cannot be created or destroyed. In practice some energy is always dissipated, so the efficiency must be less than 1.

Explanation

The useful output can never exceed the total input because of conservation of energy. Real machines always waste some energy, so their efficiency is always less than 1 (100%).

Mark scheme
  1. 1 mark

    an efficiency of 1.2 would mean the useful energy output is greater than the total energy input

  2. 1 mark

    but energy cannot be created

    allow energy is conserved; allow there is always some energy dissipated so efficiency must be less than 1

Question 3

3 marks

An electric motor has an efficiency of 60%. It does 4500 J of useful work lifting a load.

Calculate the energy wasted by the motor.

Model answer

efficiency = useful output energy ÷ total input energy
0.60 = 4500 ÷ total input energy
total input energy = 4500 ÷ 0.60 = 7500 J
energy wasted = 7500 − 4500 = 3000 J

Explanation

First find the total input energy by rearranging the efficiency equation, then subtract the useful output. A common mistake is to take 40% of the useful output, but the efficiency is a fraction of the input, not of the output.

Mark scheme
  1. 1 mark

    0.60 = 4500 ÷ total input energy

    an answer of 3000 (J) scores 3 marks

  2. 1 mark

    total input energy = 4500 ÷ 0.60 = 7500 (J)

  3. 1 mark

    energy wasted = 7500 − 4500 = 3000 (J)

    allow ecf from their total input energy; an answer of 1800 (J) (40% of 4500) scores 0 marks

Question 4

4 marks

A crane motor has a total power input of 8.0 kW. The crane lifts a load of mass 500 kg through a height of 12 m in 15 s.

gravitational field strength = 9.8 N/kg

Calculate the efficiency of the crane.

Model answer

Useful energy output = m g h = 500 × 9.8 × 12 = 58 800 J
Useful power output = 58 800 ÷ 15 = 3920 W
Total power input = 8.0 kW = 8000 W
efficiency = useful power output ÷ total power input = 3920 ÷ 8000 = 0.49 (49%)

Explanation

The useful output is the gain in gravitational potential energy of the load. Compare like with like: either useful power with input power, or useful energy with input energy over the same 15 s. Remember to convert 8.0 kW to 8000 W.

Mark scheme
  1. 1 mark

    useful energy output = 500 × 9.8 × 12 = 58 800 (J)

    an answer of 0.49 or 49% scores 4 marks

  2. 1 mark

    useful power output = 58 800 ÷ 15 = 3920 (W)

    allow total energy input = 8000 × 15 = 120 000 (J)

  3. 1 mark

    efficiency = 3920 ÷ 8000

    allow 58 800 ÷ 120 000; allow ecf

  4. 1 mark

    0.49

    allow 49%; allow ecf

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Efficiency

The big idea

No device transfers all the energy supplied to it usefully: some is always dissipated, usually by heating the surroundings. Efficiency measures what fraction of the input is transferred usefully. The higher the efficiency, the less energy is wasted, and the less energy has to be bought to do the same job.

Calculating efficiency

\[\text{efficiency} = \dfrac{\text{useful output energy transfer}}{\text{total input energy transfer}}\]
\[\text{efficiency} = \dfrac{\text{useful power output}}{\text{total power input}}\]

You must recall both equations. The energies (or powers) on the top and bottom must be in the same unit, and the units cancel, so efficiency has no unit. It is a decimal between 0 and 1; multiply by 100 to give a percentage. Use the power version when you are given powers in watts.

An efficiency can never be more than 1 (100%), because the useful output can never be bigger than the input: energy cannot be created.

Rearranged:

  • useful output = efficiency × total input
  • total input = useful output ÷ efficiency
  • wasted energy = total input − useful output

Sankey diagrams

Energy transfer (Sankey) diagram. An arrow on the left labelled "Electrical power input 400 W" splits into an arrow that continues straight on, labelled "Kinetic store of the scooter (useful) 320 W", and 2 arrows that bend downwards, labelled "Heating the motor 70 W" and "Sound 10 W" (from left to right). The width of each arrow is proportional to its value. The straight-on arrow is the useful energy output; the bent arrows are wasted energy.
The power transfers in an electric scooter motor. The outputs add up to the 400 W input.

In a Sankey diagram the width of each arrow shows the energy or power. The useful output carries straight on and the wasted outputs bend away. For this motor, efficiency \(= \dfrac{320}{400} = 0.80\), or 80%. Use the total input, not the wasted energy, on the bottom.

Whether an output is useful depends on the job. Heating is the useful output of a toaster, but it is wasted in a television. If a device has more than one useful output, add them all for the top of the equation.

An electric car speeding up

An electric car of mass 1500 kg accelerates from rest to 20 m/s. The efficiency of its battery and motor is 0.80. Calculate the energy taken from the battery.

Useful output, the kinetic energy gained (\(\text{kinetic energy} = 0.5 \times \text{mass} \times (\text{speed})^2\), an equation you must recall): \(E_k = \dfrac{1}{2}mv^2 = 0.5 \times 1500 \times 20^2 = 300\,000\) J

Total input \(= \dfrac{\text{useful output}}{\text{efficiency}} = \dfrac{300\,000}{0.80} = 375\,000\) J

Why efficient appliances cost less to run

An old washing machine motor has an efficiency of 50%. A new one has an efficiency of 80%. Each must give a useful power output of 400 W. How much less input power does the new motor need?

Old motor: total power input \(= \dfrac{400}{0.50} = 800\) W

New motor: total power input \(= \dfrac{400}{0.80} = 500\) W

The new motor needs 300 W less, for the same useful output, so less energy has to be paid for.

Higher tier only

Increasing efficiency. To increase the efficiency of an intended energy transfer, reduce the wasted transfers, so that a bigger proportion of the input is transferred usefully. Say which wasted transfer you are reducing and how:

  • lubricate moving parts, such as bearings and gears, to reduce friction and so reduce the energy dissipated by heating;
  • use thermal insulation to reduce unwanted energy transfer by heating, for example round a kettle, an oven or a hot water tank;
  • use wires with a lower resistance (thicker copper wires) in motors and cables, so less energy is dissipated by heating as the current flows;
  • streamline vehicles to reduce air resistance;
  • tighten loose parts to reduce vibration and sound.

Common mistakes

  • Dividing the wrong way round. If your answer is bigger than 1, you have divided input by output.
  • Dividing useful output by wasted energy instead of by the total input.
  • Giving efficiency a unit such as J or W, or writing 25 when you mean 25% or 0.25.
  • Mixing units, such as kW on top and W on the bottom, or a power on one line and an energy on the other.

Exam tip

A percentage efficiency must go into the equation as a decimal: 35% becomes 0.35. Check that the total input you calculate is bigger than the useful output; if it is not, something has gone wrong.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.