Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/30

Changes of state

Practise 9 exam-style questions on Changes of state for AQA GCSE Combined Science (Physics Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 9 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
9 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Which one of these is a chemical change rather than a change of state?

boiling water
burning methane
condensing steam
melting ice

Model answer

Burning methane.

Explanation

Burning makes new substances (carbon dioxide and water) that cannot be turned back into methane by cooling, so it is a chemical change. The other three are changes of state: physical changes that can be reversed to recover the original material.

Mark scheme
  1. 1 mark

    burning methane

    do not accept more than one answer

Question 2

2 marks

Melting chocolate is a physical change. Frying an egg is a chemical change.

Explain the difference between these two changes.

Model answer

Melting is a physical change: if the melted chocolate is cooled it becomes solid chocolate again, with its original properties. Frying an egg is a chemical change: new substances are made, so cooling the cooked egg does not turn it back into a raw egg.

Explanation

The test for a physical change is whether reversing it gives back the original material with its original properties. Changes of state always pass this test; chemical changes produce new substances, so simply reversing the conditions does not recover the starting material.

Mark scheme
  1. 1 mark

    melted chocolate can be cooled to become solid chocolate again, with its original properties

    allow melting can be reversed and the material recovers its original properties

  2. 1 mark

    frying an egg makes new substances, so cooling it does not turn it back into raw egg

    allow a chemical change cannot be reversed to recover the original material

Question 3

3 marks

A sealed plastic bag contains 100 g of ice. The ice is left in a warm room until it has all melted.

State the mass of water in the bag after the ice has melted, and explain your answer.

Model answer

The mass of water is 100 g. The bag is sealed, so no particles can enter or leave it. Melting is a physical change: the same water molecules are just rearranged from a regular pattern into a random one, so the mass is conserved.

Explanation

When a substance changes state, the particles change their arrangement and movement but no particles are created or destroyed. So in a closed system the mass before and after a change of state is the same.

Mark scheme
  1. 1 mark

    100 g

  2. 1 mark

    the number of particles stays the same / no particles enter or leave the bag

    allow the bag is sealed so nothing can escape

  3. 1 mark

    melting is a physical change: the particles are only rearranged, so mass is conserved

    allow no new substance is made / the same molecules are present

Question 4

3 marks

The flow chart shows three stages, 1, 2 and 3, that happen when a candle burns.

Identify which stages are physical changes and which stage is a chemical change.
Give a reason for each answer.

Flow chart of 4 boxes joined by arrows, read from left to right. The first box is "Solid wax", which leads (along an arrow labelled "Stage 1") to "Liquid wax", which leads (along an arrow labelled "Stage 2") to "Wax vapour", which leads (along an arrow labelled "Stage 3") to "Carbon dioxide and water".

Model answer

Stages 1 and 2 are physical changes (changes of state: melting and then vaporising). If the wax vapour or liquid wax is cooled, it turns back into solid wax with its original properties. Stage 3 is a chemical change, because the wax vapour reacts to form new substances, carbon dioxide and water, which cannot be turned back into wax by cooling.

Explanation

A candle shows both kinds of change. Melting and vaporising only change the state of the wax, so they are reversible physical changes. Burning makes new substances, so it is a chemical change.

Mark scheme
  1. 1 mark

    stages 1 and 2 are physical changes / changes of state

    both needed

  2. 1 mark

    (because) the wax can be turned back into solid wax by cooling / recovers its original properties

    allow no new substance is formed in stages 1 and 2

  3. 1 mark

    stage 3 is a chemical change because new substances (carbon dioxide and water) are formed

    allow it cannot be reversed to get the wax back

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Changes of state

The big idea

When a substance melts, boils or freezes, its particles are rearranged, but no particles are made or destroyed, so mass is conserved. Changes of state are physical changes: reverse the change and you get back the original material, with its original properties.

The six changes of state

ChangeFromToWhere and when
Meltingsolidliquidat the melting point
Freezing (solidifying)liquidsolidat the melting point too
Boilingliquidgasthroughout the liquid, at the boiling point
Evaporatingliquidgasonly at the surface; also below the boiling point
Condensinggasliquide.g. droplets on a cold window
Sublimatingsolidgasmissing out the liquid, e.g. solid carbon dioxide ("dry ice")

Mass is conserved

In a change of state the particles stay the same; only their arrangement and movement change, so the total mass stays the same. If a balance reading does change, particles must have entered or left what is being weighed:

  • an open pan of boiling water gets lighter because the steam escapes into the air (in a sealed container the reading would not change);
  • a cold can of drink taken from the fridge can get heavier because water vapour from the air condenses on its cold outside.

The volume and density can change, though: water expands when it freezes, but its mass stays the same.

Explaining a loss of mass

Wet washing on a line has a mass of 4.2 kg; when dry, its mass is 2.6 kg. A student says 1.6 kg of mass has been destroyed. Explain why the student is wrong.

Mass of water that has left the washing: \(4.2 - 2.6 = 1.6\) kg

The water has evaporated into the air as water vapour. Its particles still exist, so the total mass of the water has not changed; it is just no longer in the washing.

Physical and chemical changes

Physical change (every change of state)Chemical change (e.g. burning, rusting)
No new substance is formedNew substances are formed
The material recovers its original properties if the change is reversedReversing the conditions does not give back the original material

Common mistakes

  • Mixing up evaporating and boiling. Evaporation happens only at the surface; boiling happens throughout the liquid, at the boiling point.
  • Calling sublimation "evaporation". Evaporation starts from a liquid; sublimation goes straight from a solid to a gas.
  • Saying a change of state makes a new substance, or destroys mass. The particles are the same; only their arrangement and energy change.

Exam tip

Questions often describe a balance reading in an unfamiliar experiment. First decide whether the container is sealed. If it is open, say where particles have gone to or come from, then state that mass is still conserved. Name the change of state exactly: "evaporating", not "drying"; "freezing", not "cooling".

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.