Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
The statistical enquiry cycle
Statistical enquiry cycle stages 1 and 2; (a) Planning: 1a.01, 1a.02, 1a.03
Statistical enquiry cycle: planning and collecting
Statistical enquiry cycle stages 3, 4 and 5
Statistical enquiry cycle: interpreting and evaluating
Unit 2
The collection of data
(b) Types of data: 1b.01, 1b.02, 1b.03
Types of data and variables
(b) Types of data: 1b.04; (d) Collecting data: 1d.01, 1d.02
Primary and secondary data, reliability and validity
(c) Population and sampling: 1c.01, 1c.02, 1c.03
Populations, sampling frames and non-random sampling
(c) Population and sampling: 1c.04, 1c.05
Random and systematic sampling
(c) Population and sampling: 1c.06
Stratified sampling
(d) Collecting data: 1d.05, 1d.06
Problems with collected data and cleaning data
Unit 3
Processing, representing and analysing data
(a) Tabulation, diagrams and representation: 2a.01
Tabulation, tallies, pictograms and two-way tables
(a) Tabulation, diagrams and representation: 2a.01, 2a.02
Pie charts and comparative pie charts
(a) Tabulation, diagrams and representation: 2a.01
Stem and leaf diagrams
(a) Tabulation, diagrams and representation: 2a.02
Population pyramids, choropleth maps and 2D and 3D diagrams
(a) Tabulation, diagrams and representation: 2a.04
Histograms and frequency density
(a) Tabulation, diagrams and representation: 2a.05, 2a.06, 2a.07, 2a.08
Choosing representations and misleading diagrams
(a) Tabulation, diagrams and representation: 2a.09, 2a.10
Skewness
(b) Measures of central tendency: 2b.01, 2b.02, 2b.03
Mode, median and mean
(b) Measures of central tendency: 2b.01
Weighted mean and geometric mean
(c) Measures of dispersion: 2c.01, 2c.06
Standard deviation and standardised scores
(a) Tabulation, diagrams and representation: 2a.03; (c) Measures of dispersion: 2c.02, 2c.03
Box plots and outliers
(b) Measures of central tendency: 2b.03; (c) Measures of dispersion: 2c.04, 2c.05
Comparing distributions
(d) Further summary statistics: 2d.01
Index numbers
(d) Further summary statistics: 2d.02
Rates of change
(e) Scatter diagrams and correlation: 2e.01, 2e.02, 2e.03
Scatter diagrams, correlation and causation
(e) Scatter diagrams and correlation: 2e.04
Lines of best fit and regression lines
(e) Scatter diagrams and correlation: 2e.05, 2e.06, 2e.07, 2e.08
Spearman's rank and product moment correlation coefficients
(f) Time series: 2f.01, 2f.02; (b) 2b.01 mean seasonal variation
Time series, moving averages and seasonal variation
(g) Quality assurance: 2g.01, 2g.02
Quality assurance and control charts
(h) Estimation: 2h.01, 2h.02, 2h.03
Estimation, sample size and capture-recapture
Unit 4
Probability
3. Probability: 3p.01, 3p.02, 3p.03, 3p.04
Probability, expected frequency and risk
3. Probability: 3p.05, 3p.06, 3p.10
Experimental and theoretical probability and bias
3. Probability: 3p.11
Binomial distribution
3. Probability: 3p.12, 3p.13
Normal distribution
Avg
score:
–
Topics
done:
0/40

Quality assurance and control charts

Practise 12 exam-style questions on Quality assurance and control charts for Edexcel GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 12 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
12 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A bakery makes loaves of bread with a target mass of 800 g. Every hour, a sample of 6 loaves is weighed and the mean mass of the sample is recorded on a control chart.

The manager decides to use a second control chart, for the range of the masses of the loaves in each sample.

Explain why a control chart for the sample ranges is useful as well as the control chart for the sample means.

Model answer

The chart for the means only checks the average mass of the loaves in each sample. A sample could have a mean close to 800 g even though some of its loaves are much too heavy and others much too light. The chart for the ranges checks that the masses of the loaves are consistent, so it would show this problem.

Explanation

A control chart for sample means checks the location of the process (is it on target?), while a chart for sample ranges checks its spread (is it consistent?). A process can go wrong in either way, which is why the two charts are often used together. Answers that say only that the range is 'more accurate' do not explain what the range measures.

Mark scheme
  1. 1 mark

    B1 for explaining that the range checks how consistent (spread out) the masses in a sample are, e.g. a sample mean can be close to 800 g even when some loaves are much too heavy and others much too light

    oe. Accept e.g. 'the mean only checks the average mass, the range checks the variation in the masses' or 'the range shows whether the loaves are all about the same mass'. B0 for 'to check the loaves are the right mass' (that is what the chart for the means does), 'the range is more accurate' or 'the range is more reliable' with no reference to spread, variation or consistency.

Question 2

2 marks

At a quiz night, each of the 120 people first answers a 40-question round on their own. The 120 people are then put into 30 teams of 4 at random.

Ali works out these two standard deviations for the first-round scores.
P: the standard deviation of the 120 individual scores
Q: the standard deviation of the 30 team means (the mean first-round score of the 4 people in each team)

His two answers are 4.2 marks and 8.4 marks, but he has not written down which is which.

Which of the two values is Q, the standard deviation of the 30 team means?
Give a reason for your answer.

Model answer

4.2 marks is the standard deviation of the 30 team means.
The teams were chosen at random, so most teams contain a mix of people with high and low scores. These balance out when the team mean is worked out, so the team means are all fairly close to the overall mean score. A set of means of samples is more closely distributed than the individual values, so its standard deviation is the smaller value.

Explanation

Means of samples from a population are more closely distributed than the individual values, because extreme values are averaged out within each sample. So the standard deviation of the 30 team means must be the smaller value, 4.2 marks. Saying only that there are fewer team means than people does not explain why they vary less.

Mark scheme
  1. 1 mark

    B1 for 4.2 (marks)

    Accept a clear statement that the smaller value is the standard deviation of the team means.

  2. 1 mark

    B1 for a reason, e.g. means of samples (team means) are more closely distributed (less spread out) than individual values / high and low scores in a team balance each other out when the team mean is found

    Dependent on choosing 4.2. Accept e.g. 'the extreme scores are averaged out, so the team means are all close to the overall mean'. B0 for 'there are fewer teams than people' (fewer values do not by themselves give a smaller spread), 'team means are more accurate' or 'more reliable' with no reference to spread. Ignore extraneous non-contradictory comments.

Question 3

3 marks

Jodie finds an old control chart for the mean masses of samples of tennis balls made by a machine. The label on the target line is missing.

The warning lines and action lines are in the usual positions for a control chart of sample means.

The two warning lines are 1.2 g apart.
The upper action line is at 58.5 g.

Work out the target mass.

Model answer

The warning lines are 2 standard deviations above and below the target, so they are 4 standard deviations apart.
4 × standard deviation = 1.2, so standard deviation = 1.2 ÷ 4 = 0.3 g
The upper action line is 3 standard deviations above the target.
Target = 58.5 − 3 × 0.3 = 58.5 − 0.9 = 57.6 g

Explanation

The gap between the two warning lines is 2 + 2 = 4 standard deviations of the sample mean, which gives a standard deviation of 0.3 g. The upper action line is 3 standard deviations above the target, so subtract 0.9 g from 58.5 g. A common error is to divide 1.2 by 2, as if the warning lines were only 2 standard deviations apart.

Mark scheme
  1. 1 mark

    M1 for a correct method to find the standard deviation of the sample means, e.g. \(1.2 \div 4\) (= 0.3)

    oe, e.g. forming \((\mu + 2\sigma) - (\mu - 2\sigma) = 1.2\). Any letters or words may be used. The warning lines are 2 standard deviations either side of the target, so they are 4 standard deviations apart. Using \(1.2 \div 2\) (= 0.6) or \(1.2 \div 6\) (= 0.2) as the standard deviation scores M0, but the second M1 can still be awarded. Halving 1.2 to get 0.6 (the gap between the target and a warning line, 2 standard deviations) and then halving again is a correct method. Answer-only rule for this question: A correct answer with no working scores full marks.

  2. 1 mark

    M1 for \(58.5 - 3 \times\) their standard deviation, e.g. \(58.5 - 3 \times 0.3\)

    ft their standard deviation. Using 2 standard deviations (e.g. \(58.5 - 2 \times 0.3 = 57.9\)) scores M0.

  3. 1 mark

    A1 for 57.6 (g)

    cao. A correct answer with no working scores full marks. 56.7 (from a standard deviation of 0.6) scores M0M1A0.

Question 4

4 marks

A sawmill cuts fence posts with a target length of 1800 mm. Every hour, a sample of 5 posts is measured. The median and the range of the lengths in each sample are recorded on two control charts.

Control chart for medians: warning lines at 1797.6 mm and 1802.4 mm, action lines at 1796.4 mm and 1803.6 mm
Control chart for ranges: upper warning line at 9 mm, upper action line at 12 mm

The lengths, in mm, of the posts in the latest sample are

1803   1797   1801   1808   1799

What action should be taken after this sample? You must show your working.

Model answer

Ordered lengths: 1797, 1799, 1801, 1803, 1808
Median = 1801 mm
Range = 1808 − 1797 = 11 mm
The median, 1801 mm, is within the warning lines (1797.6 mm to 1802.4 mm).
The range, 11 mm, is between the upper warning line (9 mm) and the upper action line (12 mm).
So another sample should be taken straight away to check whether the lengths are becoming inconsistent.

Explanation

Each statistic is compared with its own chart's lines, then one decision is made for the process. Here the median is fine but the range has crossed the warning line, so another sample is taken immediately; if it is also beyond a warning line, the saw is stopped and reset. A common error is to treat the two charts separately and give two different actions.

Mark scheme
  1. 1 mark

    B1 for median = 1801 (mm)

    cao. The ordered lengths are 1797, 1799, 1801, 1803, 1808.

  2. 1 mark

    B1 for range = 11 (mm)

    cao (1808 − 1797).

  3. 1 mark

    B1 for comparing both statistics with the lines: the median is within the warning lines AND the range is between the upper warning line and the upper action line

    Both comparisons are needed, e.g. '1797.6 < 1801 < 1802.4 and 9 < 11 < 12'. ft their median and range if only one of them is wrong.

  4. 1 mark

    B1 for take another sample straight away (immediately)

    Dependent on the previous mark. Accept 'continue production but take another sample at once'. B0 for 'stop the machine', 'no action needed' or two separate answers for the two charts that disagree (the decision is for the process as a whole). A decision with no median or range shown scores 0 (answer only scores 0).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.