Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
The statistical enquiry cycle
Statistical enquiry cycle stages 1 and 2; (a) Planning: 1a.01, 1a.02, 1a.03
Statistical enquiry cycle: planning and collecting
Statistical enquiry cycle stages 3, 4 and 5
Statistical enquiry cycle: interpreting and evaluating
Unit 2
The collection of data
(b) Types of data: 1b.01, 1b.02, 1b.03
Types of data and variables
(b) Types of data: 1b.04; (d) Collecting data: 1d.01, 1d.02
Primary and secondary data, reliability and validity
(c) Population and sampling: 1c.01, 1c.02, 1c.03
Populations, sampling frames and non-random sampling
(c) Population and sampling: 1c.04, 1c.05
Random and systematic sampling
(c) Population and sampling: 1c.06
Stratified sampling
(d) Collecting data: 1d.05, 1d.06
Problems with collected data and cleaning data
Unit 3
Processing, representing and analysing data
(a) Tabulation, diagrams and representation: 2a.01
Tabulation, tallies, pictograms and two-way tables
(a) Tabulation, diagrams and representation: 2a.01, 2a.02
Pie charts and comparative pie charts
(a) Tabulation, diagrams and representation: 2a.01
Stem and leaf diagrams
(a) Tabulation, diagrams and representation: 2a.02
Population pyramids, choropleth maps and 2D and 3D diagrams
(a) Tabulation, diagrams and representation: 2a.04
Histograms and frequency density
(a) Tabulation, diagrams and representation: 2a.05, 2a.06, 2a.07, 2a.08
Choosing representations and misleading diagrams
(a) Tabulation, diagrams and representation: 2a.09, 2a.10
Skewness
(b) Measures of central tendency: 2b.01, 2b.02, 2b.03
Mode, median and mean
(b) Measures of central tendency: 2b.01
Weighted mean and geometric mean
(c) Measures of dispersion: 2c.01, 2c.06
Standard deviation and standardised scores
(a) Tabulation, diagrams and representation: 2a.03; (c) Measures of dispersion: 2c.02, 2c.03
Box plots and outliers
(b) Measures of central tendency: 2b.03; (c) Measures of dispersion: 2c.04, 2c.05
Comparing distributions
(d) Further summary statistics: 2d.01
Index numbers
(d) Further summary statistics: 2d.02
Rates of change
(e) Scatter diagrams and correlation: 2e.01, 2e.02, 2e.03
Scatter diagrams, correlation and causation
(e) Scatter diagrams and correlation: 2e.04
Lines of best fit and regression lines
(e) Scatter diagrams and correlation: 2e.05, 2e.06, 2e.07, 2e.08
Spearman's rank and product moment correlation coefficients
(f) Time series: 2f.01, 2f.02; (b) 2b.01 mean seasonal variation
Time series, moving averages and seasonal variation
(g) Quality assurance: 2g.01, 2g.02
Quality assurance and control charts
(h) Estimation: 2h.01, 2h.02, 2h.03
Estimation, sample size and capture-recapture
Unit 4
Probability
3. Probability: 3p.01, 3p.02, 3p.03, 3p.04
Probability, expected frequency and risk
3. Probability: 3p.05, 3p.06, 3p.10
Experimental and theoretical probability and bias
3. Probability: 3p.11
Binomial distribution
3. Probability: 3p.12, 3p.13
Normal distribution
Avg
score:
–
Topics
done:
0/40

Choosing representations and misleading diagrams

Practise 16 exam-style questions on Choosing representations and misleading diagrams for Edexcel GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–5 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Hannah uses spreadsheet software to produce a bar chart of the number of people using a leisure centre on each day of one week.
The software offers a 3D effect, which shows each bar as a solid block seen from above and to one side.

Give one reason why Hannah should not use the 3D effect.

Model answer

With the 3D effect, the top of each block is drawn behind and above its front edge, so it is hard to see exactly where each bar meets the scale. The number of people on each day could not be read accurately, and the blocks may look bigger or smaller than they really are.

Explanation

A 3D effect is decoration: it adds no information and it distorts the picture, because the perspective changes how big each block looks and the tops of the blocks do not line up with the scale. Software makes effects like this easy to add, but a plain bar chart represents the data accurately.

Mark scheme
  1. 1 mark

    B1 for one correct reason, e.g.
    - it is difficult to read the height of each bar against the scale (the top of each block is not level with the scale lines)
    - the perspective can make some blocks look bigger or smaller than they are, so the comparison between days is distorted
    - the 3D effect adds no information, it only makes the chart harder to read accurately

    oe. The reason must say how the 3D effect causes a problem. 'It is misleading', 'it is harder to read' or 'it is confusing' alone scores B0. Accept 'it is harder to read the values from the scale'.

Question 2

2 marks

The pie chart shows how a group of students travel to school.
The sector for Car represents 15 students.

Tomasz wants to show the same information in a bar chart.

Work out the height of the bar for each of the other four types of transport.

Pie chart. A circle divided into sectors, drawn clockwise from the top (12 o'clock): Bus, 150° (printed); Car, 90° (printed); Walk, 66° (printed); Cycle, 36° (printed); Train, 18° (printed). Each printed angle is marked with a small arc at the centre.

Model answer

90° represents 15 students, so 1 student is represented by \(90 \div 15 = 6^\circ\).
Bus: \(150 \div 6 = 25\)
Walk: \(66 \div 6 = 11\)
Cycle: \(36 \div 6 = 6\)
Train: \(18 \div 6 = 3\)
The bars have heights Bus 25, Walk 11, Cycle 6 and Train 3 (and Car 15).

Explanation

The same frequencies can be shown in different formats. In a pie chart each angle is proportional to its frequency, so use the sector you know to find how many degrees represent one student, then divide every angle by it. A common error is to work out each angle as a fraction of 360 and stop there, which gives proportions rather than the numbers of students needed for the bar heights.

Mark scheme
  1. 1 mark

    M1 for a correct method to find the number of degrees for one student, e.g. \(90 \div 15\) (= 6°), or the number of students for one degree, e.g. \(15 \div 90\) oe, or the total number of students, \(\dfrac{360}{90} \times 15 = 60\)

    May be implied by one correct frequency. Answer-only rule for this question: A correct answer with no working scores full marks.

  2. 1 mark

    A1 for Bus 25, Walk 11, Cycle 6 and Train 3

    All four needed for A1. A correct answer with no working scores full marks.

Question 3

3 marks

A fitness club's leaflet includes this bar chart. It shows the mean resting heart rate, in beats per minute, of the members who completed a 12-week training programme, measured before and after the programme.

Megan says,
"The chart shows that the members' mean resting heart rate halved."

Use values from the bar chart to work out the actual percentage decrease in the mean resting heart rate. Give your answer correct to 1 decimal place.

Explain why the bar chart gives the impression that the mean resting heart rate halved.

Bar chart of mean resting heart rate (beats per minute) for each time of measurement: Before the programme 72, After 12 weeks 66. The vertical axis starts at 60, not 0.

Model answer

From the bar chart, before: 72 beats per minute and after: 66 beats per minute.
Decrease \(= 72 - 66 = 6\)
Percentage decrease \(= \dfrac{6}{72} \times 100 = 8.33...\% = 8.3\%\)

The vertical axis starts at 60, not at 0. The 'Before' bar is 12 above the bottom of the axis and the 'After' bar is only 6 above it, so the 'After' bar looks half as tall, even though the mean resting heart rate fell by only about 8%.

Explanation

When a vertical axis does not start at zero, the heights of the bars are no longer in proportion to the values, so differences look much bigger than they are. Read the values from the scale and work out the change as a percentage of the original value (72), not of the new value. A fall from 72 to 66 is about 8%, nowhere near a half.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{72 - 66}{72} \times 100\) oe, or \(\dfrac{66}{72}\) (= 0.916...)

    Values read from the bar chart: 72 (before) and 66 (after). A decrease of 6 beats per minute on its own scores M0. Dividing by 66 instead of 72 (\(\dfrac{6}{66} \times 100 = 9.1\)) scores M0A0. Answer-only rule for this question: A correct answer with no working scores M1A1.

  2. 1 mark

    A1 for 8.3 (%)

    Accept 8.33 or more accurate (8.333...). Ignore a minus sign if it is clear that this is a decrease. A correct answer with no working scores M1A1.

  3. 1 mark

    B1 for the vertical axis starts at 60, not 0, so the 'After' bar (6 above the bottom of the axis) is half the height of the 'Before' bar (12 above it)

    oe. Must refer to the vertical axis not starting at 0 (or starting at 60), or being truncated, and how this makes the fall look bigger. Accept 'the axis is truncated, so the heights of the bars are not in proportion to the heart rates'. B0 for 'the scale is misleading' or 'the bars are the wrong size' with no reference to where the axis starts. B0 for a statement only that the vertical axis does not start at 0 (or starts at 60), with nothing about its effect on the heights of the bars. This mark is independent of the first two marks.

Question 4

4 marks

The cumulative frequency graph shows information about the masses, \(m\) grams, of 100 potatoes.

Sana wants to show the same information in a histogram with the classes
\(50 < m \le 100\)   \(100 < m \le 140\)   \(140 < m \le 180\)   \(180 < m \le 250\)   \(250 < m \le 350\)

Work out the frequency density for each class.

Cumulative frequency graph on a grid of small squares. The horizontal axis is "Mass (g)", from 50 to 350, numbered every 50, with 5 small squares between numbered values (each small square is 10). The vertical axis is "Cumulative frequency", from 0 to 100, numbered every 10, with 5 small squares between numbered values (each small square is 2). A smooth curve starts at (50, 0) and passes through (100, 12), (140, 32), (180, 64), (250, 92) and (350, 100) (each point is marked with a cross).

Model answer

Read the cumulative frequency at each class boundary: 100 g: 12, 140 g: 32, 180 g: 64, 250 g: 92, 350 g: 100.
Frequencies: \(12\), \(32 - 12 = 20\), \(64 - 32 = 32\), \(92 - 64 = 28\), \(100 - 92 = 8\)
Frequency densities (frequency divided by class width):
\(50 < m \le 100\): \(12 \div 50 = 0.24\)
\(100 < m \le 140\): \(20 \div 40 = 0.5\)
\(140 < m \le 180\): \(32 \div 40 = 0.8\)
\(180 < m \le 250\): \(28 \div 70 = 0.4\)
\(250 < m \le 350\): \(8 \div 100 = 0.08\)

Explanation

A cumulative frequency graph shows running totals, so the frequency of each class is the difference between the cumulative frequencies at its two class boundaries. Each frequency is then divided by its class width to give the frequency density. A common error is to divide the cumulative frequencies themselves by the class widths.

Mark scheme
  1. 1 mark

    M1 for at least three correct frequencies from the graph: 12, 20, 32, 28, 8

    The cumulative frequencies at 100, 140, 180, 250 and 350 g are 12, 32, 64, 92 and 100. Frequencies may be seen in a table. Answer-only rule for this question: A correct answer with no working scores full marks.

  2. 1 mark

    A1 for all five frequencies correct: 12, 20, 32, 28, 8

    cao

  3. 1 mark

    M1 for frequency divided by class width for at least two classes, e.g. \(12 \div 50\) or \(20 \div 40\)

    ft their frequencies. Dividing the cumulative frequencies by the class widths scores M0.

  4. 1 mark

    A1 for 0.24, 0.5, 0.8, 0.4, 0.08

    All five needed. Accept densities per 10 g (2.4, 5, 8, 4, 0.8) or per another stated standard width, if the unit is made clear. A correct answer with no working scores full marks.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.