Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Statistics (Higher Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
The statistical enquiry cycle
Statistical enquiry cycle stages 1 and 2; (a) Planning: 1a.01, 1a.02, 1a.03
Statistical enquiry cycle: planning and collecting
Statistical enquiry cycle stages 3, 4 and 5
Statistical enquiry cycle: interpreting and evaluating
Unit 2
The collection of data
(b) Types of data: 1b.01, 1b.02, 1b.03
Types of data and variables
(b) Types of data: 1b.04; (d) Collecting data: 1d.01, 1d.02
Primary and secondary data, reliability and validity
(c) Population and sampling: 1c.01, 1c.02, 1c.03
Populations, sampling frames and non-random sampling
(c) Population and sampling: 1c.04, 1c.05
Random and systematic sampling
(c) Population and sampling: 1c.06
Stratified sampling
(d) Collecting data: 1d.05, 1d.06
Problems with collected data and cleaning data
Unit 3
Processing, representing and analysing data
(a) Tabulation, diagrams and representation: 2a.01
Tabulation, tallies, pictograms and two-way tables
(a) Tabulation, diagrams and representation: 2a.01, 2a.02
Pie charts and comparative pie charts
(a) Tabulation, diagrams and representation: 2a.01
Stem and leaf diagrams
(a) Tabulation, diagrams and representation: 2a.02
Population pyramids, choropleth maps and 2D and 3D diagrams
(a) Tabulation, diagrams and representation: 2a.04
Histograms and frequency density
(a) Tabulation, diagrams and representation: 2a.05, 2a.06, 2a.07, 2a.08
Choosing representations and misleading diagrams
(a) Tabulation, diagrams and representation: 2a.09, 2a.10
Skewness
(b) Measures of central tendency: 2b.01, 2b.02, 2b.03
Mode, median and mean
(b) Measures of central tendency: 2b.01
Weighted mean and geometric mean
(c) Measures of dispersion: 2c.01, 2c.06
Standard deviation and standardised scores
(a) Tabulation, diagrams and representation: 2a.03; (c) Measures of dispersion: 2c.02, 2c.03
Box plots and outliers
(b) Measures of central tendency: 2b.03; (c) Measures of dispersion: 2c.04, 2c.05
Comparing distributions
(d) Further summary statistics: 2d.01
Index numbers
(d) Further summary statistics: 2d.02
Rates of change
(e) Scatter diagrams and correlation: 2e.01, 2e.02, 2e.03
Scatter diagrams, correlation and causation
(e) Scatter diagrams and correlation: 2e.04
Lines of best fit and regression lines
(e) Scatter diagrams and correlation: 2e.05, 2e.06, 2e.07, 2e.08
Spearman's rank and product moment correlation coefficients
(f) Time series: 2f.01, 2f.02; (b) 2b.01 mean seasonal variation
Time series, moving averages and seasonal variation
(g) Quality assurance: 2g.01, 2g.02
Quality assurance and control charts
(h) Estimation: 2h.01, 2h.02, 2h.03
Estimation, sample size and capture-recapture
Unit 4
Probability
3. Probability: 3p.01, 3p.02, 3p.03, 3p.04
Probability, expected frequency and risk
3. Probability: 3p.05, 3p.06, 3p.10
Experimental and theoretical probability and bias
3. Probability: 3p.11
Binomial distribution
3. Probability: 3p.12, 3p.13
Normal distribution
Avg
score:
–
Topics
done:
0/40

Box plots and outliers

Practise 16 exam-style questions on Box plots and outliers for Edexcel GCSE Statistics (Higher Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Mr Evans recorded the times, in seconds, that 10 students in his Year 10 PE class took to run 100 metres.

15.3   14.8   16.2   1.42   13.9   17.1   15.8   14.4   16.7   15.1

By inspection, write down the time that is likely to be an error. Give a reason for your answer.

Model answer

1.42 seconds. Nobody can run 100 metres in 1.42 seconds, so this time cannot be genuine. It is probably 14.2 seconds with the decimal point in the wrong place.

Explanation

An outlier can often be spotted by inspection: 1.42 is far below every other time. Being an outlier does not by itself make a value an error, but here the context shows it must be one, because 100 m in 1.42 seconds is far faster than any human can run. Saying only that it is an outlier or much smaller than the rest does not explain why it is an error.

Mark scheme
  1. 1 mark

    B1 for 1.42 (seconds) with a reason in context, e.g. it is impossible for anyone to run 100 m in 1.42 seconds / it is far too fast to be a real time (so the decimal point is probably in the wrong place and the time should be 14.2 seconds)

    Both the value and a reason are needed. The reason must refer to the time being impossible or unrealistic for running 100 m; accept 'even the world record is over 9 seconds' oe. B0 for 'it is an outlier' or 'it is much smaller than the other times' alone (this only restates the data). Ignore a suggested correct value.

Question 2

2 marks

At a dog show, the mass of each of the 40 dogs entered was recorded on a spreadsheet. The masses were between 2.1 kg and 68 kg, except for one dog whose mass was recorded as 410 kg.

Explain why 410 kg is likely to be an error.

Suggest how the organisers could find the correct mass of this dog.

Model answer

No dog weighs anywhere near 410 kg, so this value cannot be genuine; it is probably 41.0 kg with the decimal point in the wrong place.
The organisers could check the original record for that dog, such as the reading written down when it was weighed, or weigh the dog again.

Explanation

The context decides whether an outlier is genuine or an error. A 410 kg dog is impossible, so the value is an error, but the right response is to go back to the original data to find the correct value, not simply to delete it or guess it. Answers that only say the value is 'an outlier' or 'very different from the rest' score nothing.

Mark scheme
  1. 1 mark

    B1 for a reason in context, e.g. no dog weighs anywhere near 410 kg / it is far heavier than any dog could be, so it cannot be a genuine mass

    The reason must show that the mass is impossible or unrealistic for a dog. Accept 'it is probably 41.0 kg with the decimal point in the wrong place'. B0 for 'it is an outlier' or 'it is much bigger than the others' alone (this only restates the data).

  2. 1 mark

    B1 for a sensible way to find the correct value, e.g. check the original record for that dog (the entry form or the reading written down when it was weighed) / weigh the dog again / ask the owner

    This mark is independent of the first. B0 for 'remove it', 'ignore it' or 'replace it with the mean or median' (these do not find the correct value). Accept 'check the original record to see if it should be 41.0 kg'.

Question 3

3 marks

A shop tested the battery life, in hours, of 50 tablets of the same model. Here is some information about the results.

Shortest battery life: 3.2 hours
Lower quartile: 8.4 hours
Median: 9.6 hours
Upper quartile: 10.8 hours
Longest battery life: 13.1 hours

Using the interquartile range, determine whether the shortest battery life and the longest battery life are outliers.
You must show your working.

Model answer

IQR = 10.8 - 8.4 = 2.4 hours
\(1.5 \times 2.4 = 3.6\)
Lower limit = 8.4 - 3.6 = 4.8 hours
Upper limit = 10.8 + 3.6 = 14.4 hours
3.2 < 4.8, so the shortest battery life is an outlier.
13.1 < 14.4, so the longest battery life is not an outlier.

Explanation

With quartiles, an outlier is below \(\text{LQ} - 1.5 \times \text{IQR}\) or above \(\text{UQ} + 1.5 \times \text{IQR}\). Each extreme value must then be compared with its own limit and a clear decision given. The most common error is adding \(1.5 \times \text{IQR}\) to the median.

Mark scheme
  1. 1 mark

    M1 for \(8.4 - 1.5 \times (10.8 - 8.4)\) or \(10.8 + 1.5 \times (10.8 - 8.4)\)

    oe, e.g. IQR = 2.4 and \(1.5 \times 2.4 = 3.6\) with an attempt to subtract it from the lower quartile or add it to the upper quartile. Adding to or subtracting from the median is M0.

  2. 1 mark

    A1 for 4.8 and 14.4

    Both limits needed.

  3. 1 mark

    B1ft for the shortest battery life (3.2 hours) is an outlier and the longest battery life (13.1 hours) is not an outlier, with the comparisons 3.2 < 4.8 and 13.1 < 14.4 (in symbols or words)

    ft their limits if M1 scored. Both decisions needed. Answer only (no working) scores 0, as the question says 'You must show your working'.

Question 4

4 marks

A school gardening club grew 30 sweetcorn plants. Ellis measured the height, \(x\) cm, of each plant. Here is a summary of his results.

\(n = 30\)   \(\sum x = 5472\)   \(\sum x^2 = 1\,011\,400\)

Shortest plant: 112 cm   Tallest plant: 238 cm

Standard deviation \(= \sqrt{\dfrac{\sum x^2}{n} - \left(\dfrac{\sum x}{n}\right)^2}\)

Ellis says, "The shortest plant and the tallest plant are both outliers."

Use the mean and the standard deviation to assess Ellis's statement. You must show your working.

Model answer

Mean = \(\dfrac{5472}{30} = 182.4\) cm
Standard deviation = \(\sqrt{\dfrac{1\,011\,400}{30} - 182.4^2} = \sqrt{33\,713.33... - 33\,269.76} = \sqrt{443.57...} = 21.06...\) cm
\(3 \times 21.06... = 63.18...\)
Lower limit = 182.4 - 63.18 = 119.2 cm
Upper limit = 182.4 + 63.18 = 245.6 cm
112 < 119.2, so the shortest plant is an outlier.
238 < 245.6, so the tallest plant is not an outlier.
Ellis is not correct: only the shortest plant is an outlier.

Explanation

Find the mean and the standard deviation from the sums, then the limits mean - 3 sd and mean + 3 sd, and compare each extreme value with its own limit. Here only the shortest plant is beyond a limit, so Ellis's statement is wrong. Common errors are using \((\sum x)^2\) in place of \(\sum x^2\), forgetting the square root, and checking only one of the two plants.

Mark scheme
  1. 1 mark

    M1 for \(\sqrt{\dfrac{1\,011\,400}{30} - \left(\dfrac{5472}{30}\right)^2}\) or \(\sqrt{33\,713.3... - 182.4^2}\) or \(\sqrt{443.57...}\)

    oe. Implies the mean, 182.4.

  2. 1 mark

    A1 for standard deviation awrt 21.1

    21.061... Using the n - 1 formula gives 21.42...: this scores M1A0; the method mark below can still be scored (its limits are 118.1 and 246.7), but not the final A1.

  3. 1 mark

    M1 for \(182.4 - 3 \times 21.06...\) or \(182.4 + 3 \times 21.06...\)

    ft their mean and standard deviation. Using 2 standard deviations, \(1.5 \times\) the standard deviation or the median is M0.

  4. 1 mark

    A1 for limits 119.2 and 245.6 and the conclusion that Ellis is not correct: the shortest plant is an outlier (112 < 119.2) but the tallest plant is not (238 < 245.6)

    Accept lower limit 119.1 to 119.4 and upper limit 245.4 to 245.7 (a standard deviation rounded to 21.1 gives 119.1 and 245.7; rounded to 21 it gives 119.4 and 245.4). Both limits, both comparisons (in symbols or words) and a clear decision about Ellis's statement are needed. Answer only scores 0, as the question says 'You must show your working'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.