Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Work done and energy transfer

Practise 14 exam-style questions on Work done and energy transfer for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 14 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
14 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A shopper pushes a trolley 12 m along a level aisle with a steady horizontal force of 45 N.

Calculate the work done by the shopper on the trolley.

Model answer

W = F × s
W = 45 × 12
W = 540 J

Explanation

Work done = force × distance moved in the direction of the force. With force in newtons and distance in metres, the work done is in joules.

Mark scheme
  1. 1 mark

    W = 45 × 12

    an answer of 540 J scores 2 marks

  2. 1 mark

    540 (J)

Question 2

2 marks

A student pulls a wooden block across three different surfaces at a steady speed using a newtonmeter. The table shows the force needed for each surface.

The block is pulled the same distance across each surface. The student measures the temperature of the underside of the block before and after each pull.

Predict which surface gives the largest temperature rise. Give a reason for your answer.

Table with columns "Surface", "Force needed to pull the block at a steady speed in N". Surface: Polished wood; Force needed to pull the block at a steady speed in N: 2.4 | Surface: Carpet; Force needed to pull the block at a steady speed in N: 5.6 | Surface: Sandpaper; Force needed to pull the block at a steady speed in N: 9.0.

Model answer

Sandpaper. The force needed is largest on sandpaper, so over the same distance the most work is done against friction, transferring the most energy to the thermal energy store of the block.

Explanation

Work done against friction = friction force × distance. For the same distance, the largest friction force means the most work done, and work done against friction raises the temperature of the objects that rub together.

Mark scheme
  1. 1 mark

    sandpaper

  2. 1 mark

    largest (friction) force so the most work is done against friction / the most energy is transferred to the thermal store of the block

Question 3

3 marks

A woman lifts a box from the floor onto a high shelf.

Describe the energy transfer involved when she does work on the box.

Model answer

The woman exerts an upward force on the box which moves it upwards, so she does work on it. Energy is transferred from the chemical energy store of her muscles to the gravitational potential energy store of the box. Some energy is also transferred to the thermal energy store of her body and the surroundings.

Explanation

Doing work is one way of transferring energy: the work done on the box equals the energy transferred to it. Lifting raises the box's gravitational potential energy store, and the energy comes from the chemical store of the person doing the lifting.

Mark scheme
  1. 1 mark

    the woman exerts a force that moves the box upwards, so work is done on the box

    allow the force causes a displacement

  2. 1 mark

    energy is transferred from the chemical energy store of the woman (her muscles)

  3. 1 mark

    to the gravitational potential energy store of the box

    ignore some energy is transferred to the thermal store of the woman / surroundings

Question 4

4 marks

A weightlifter lifts a barbell of mass 120 kg from the floor to a height of 2.1 m above the floor.

gravitational field strength = 9.8 N/kg

Calculate the work done on the barbell.
Give your answer to 2 significant figures.

Model answer

Force needed to lift the barbell = its weight
W = m × g = 120 × 9.8 = 1176 N
Work done = F × s = 1176 × 2.1 = 2469.6 J
Work done = 2500 J (2 s.f.)

Explanation

To lift an object at a steady speed the upward force must equal the object's weight, so first calculate the weight using W = m g. Then work done = force × distance moved along the line of the force (vertically upwards).

Mark scheme
  1. 1 mark

    force needed = weight = 120 × 9.8 = 1176 (N)

    an answer of 2500 J scores 4 marks; an answer of 2470 J or 2469.6 J scores 3 marks

  2. 1 mark

    W = 1176 × 2.1

    allow ecf from an incorrect weight

  3. 1 mark

    = 2469.6 (J)

    allow ecf

  4. 1 mark

    2500 (J)

    allow ecf: their answer correctly given to 2 significant figures

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Work done and energy transfer

The big idea

When a force causes an object to move through a distance, work is done on the object. Doing work is a way of transferring energy, so work is measured in joules, like energy. Work done against friction always ends up warming things, which is why brakes and rubbing hands get hot.

Calculating work done

A force does work on an object when the force causes a displacement of the object. You must recall this equation (it is not on the equation sheet):

\[\text{work done} = \text{force} \times \text{distance moved along the line of action of the force}\]
\[W = Fs\]
  • work done, \(W\), in joules, J
  • force, \(F\), in newtons, N
  • distance, \(s\), in metres, m

The distance must be along the line of action of the force (in the direction the force acts). So:

  • if the object does not move, no work is done, however hard you push: holding a heavy suitcase still does no work on it;
  • a force at right angles to the motion does no work: the upward force holding a bag as you walk along a level path does no work on the bag;
  • when you push a box up a ramp, the work you do uses the length of the ramp (the direction of your push), not its vertical height.

Joules and newton-metres

One joule of work is done when a force of one newton causes a displacement of one metre. So 1 joule = 1 newton-metre (1 J = 1 N m), and converting is one-for-one: 350 N m = 350 J, and 4.2 kN m = 4200 N m = 4200 J.

Before you calculate, convert to newtons and metres: kN × 1000 gives N, cm ÷ 100 gives m, km × 1000 gives m. An answer in J can then be converted: J ÷ 1000 gives kJ.

Energy transfers when work is done

The work done is equal to the energy transferred. To describe the transfer, name the force doing the work and the energy stores that change.

What happensForce doing workEnergy transfer
Lifting a crate onto a lorryYour lifting forceChemical store of your muscles → gravitational potential energy store of the crate
A stone fallingIts weight (gravity)Gravitational potential energy store → kinetic energy store
Dragging a box across a floor at a steady speedYour pull, against frictionChemical store → thermal stores of the box, floor and surroundings
A bicycle brakingFriction from the brakesKinetic energy store → thermal store of the brakes

Work done against the frictional forces acting on an object causes a rise in the temperature of the object. This energy is usually dissipated to the surroundings and wasted.

Kicking a football

A footballer's boot pushes on a ball with an average force of 450 N. While the boot is touching it, the ball moves 16 cm in the same direction as the push. How much work does the boot do, and how much energy does the ball gain? Ignore any energy dissipated.

Convert: \(16\text{ cm} = 0.16\text{ m}\)

\(W = Fs = 450 \times 0.16 = 72\text{ J}\)

The work done transfers 72 J to the kinetic energy store of the ball.

Sanding a shelf

A carpenter sands a wooden shelf by hand. The friction force between the sandpaper and the wood is 12 N, and each stroke moves the sandpaper 25 cm. Calculate the work done against friction in 40 strokes, and explain why the wood gets warm.

Total distance: \(40 \times 25\text{ cm} = 1000\text{ cm} = 10\text{ m}\)

\(W = Fs = 12 \times 10 = 120\text{ J}\)

The work done against friction transfers 120 J to the thermal energy stores of the wood and the sandpaper, so their temperature rises. The energy is then dissipated to the surroundings.

Remember

  • \(W = Fs\) must be recalled; \(W\) in J, \(F\) in N, \(s\) in m.
  • 1 J = 1 N m.
  • Work done = energy transferred.
  • Work done against friction raises the temperature.

Common mistakes

  • Using the mass instead of the weight when something is lifted. Find the weight first (weight = mass × gravitational field strength), then multiply it by the height.
  • Leaving a distance in centimetres: 40 cm is 0.40 m.
  • Saying work is done when an object is held still. With no displacement, no work is done on it.
  • Writing "heat" or "energy is lost". Say energy is transferred to the thermal energy store (and dissipated to the surroundings).
  • Using the vertical height for the work done pushing along a ramp. Use the distance along the line of the push.

Exam tip

For "describe the energy transfer" questions, name the store the energy comes from and the store it goes to, for example "from the kinetic energy store of the car to the thermal energy store of the brakes". A force that does work against friction always links to a temperature rise.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.