Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Electromagnetism

Practise 15 exam-style questions on Electromagnetism for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Give two factors that affect the strength of the magnetic field around a straight wire carrying a current.

Model answer

The size of the current in the wire, and the distance from the wire.

Explanation

A larger current produces a stronger magnetic field, and the field gets weaker as you move further from the wire. That is why the field lines around a wire get further apart with distance.

Mark scheme
  1. 1 mark

    the size of the current (in the wire)

    allow a larger current gives a stronger field

  2. 1 mark

    the distance from the wire

    allow the field is weaker further from the wire

Question 2

2 marks

A student makes an electromagnet by winding wire around an iron nail.

Give two ways she could make the electromagnet stronger without changing the core.

Model answer

Increase the current through the wire. Increase the number of turns of wire around the nail.

Explanation

A bigger current makes a stronger magnetic field around each turn, and more turns means more fields adding together inside the coil. Both make the electromagnet stronger.

Mark scheme
  1. 1 mark

    increase the current

    allow increase the potential difference of the supply

  2. 1 mark

    increase the number of turns of wire (on the same length of core)

    allow wind the coils closer together

Question 3

3 marks

Explain how shaping a wire into a solenoid increases the strength of the magnetic field produced by a current.

Model answer

Each turn of the wire carries the current, so each turn produces its own magnetic field. Inside the coil the fields from all the turns point in the same direction, so they add together. This concentrates the field inside the solenoid, making it much stronger than the field around a straight wire carrying the same current, and the more turns there are, the stronger the field.

Explanation

Coiling the wire lets the same current produce the field many times over in the same place. Adding an iron core increases the strength even more.

Mark scheme
  1. 1 mark

    each turn (loop) of the wire produces its own magnetic field

  2. 1 mark

    inside the coil the fields from all the turns point in the same direction and add together (reinforce)

    allow the field lines are concentrated inside the coil

  3. 1 mark

    so the field inside is much stronger than around a single straight wire, and more turns give a stronger field

Question 4

4 marks

Describe how the magnetic effect of a current in a straight wire can be demonstrated.

Model answer

Place a plotting compass next to a straight wire that is connected to a power supply and a switch. When the current is switched on, the compass needle moves, showing there is a magnetic field around the wire. When the current is switched off, the needle points north again. If the current is reversed, the needle moves the other way, showing the field direction depends on the current direction. Only switch the current on briefly, because a large current makes the wire hot.

Explanation

A compass needle is a small magnet, so it only moves if a magnetic field acts on it. Reversing the current reverses the field, which proves the field is produced by the current.

Mark scheme
  1. 1 mark

    place a plotting compass next to (or under) a straight wire connected in a circuit

    max 4

  2. 1 mark

    when the current is switched on, the compass needle moves (deflects)

  3. 1 mark

    when the current is switched off, the needle returns to pointing north

  4. 1 mark

    when the current is reversed, the needle deflects the opposite way

  5. 1 mark

    alternatively, pass a vertical wire through a horizontal card sprinkled with iron filings: when the current flows and the card is tapped, the filings form circles around the wire

  6. 1 mark

    a large current is needed for a clear effect, so switch it on only briefly

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Electromagnetism

The big idea

When a current flows through a wire, a magnetic field is produced around the wire. Winding the wire into a coil, called a solenoid, makes the field much stronger, and adding an iron core makes it stronger still: an electromagnet. Unlike a permanent magnet, an electromagnet can be switched on and off, which is why bells, relays, circuit breakers and scrapyard cranes use them.

The field around a straight wire

When a current flows through a conducting wire, a magnetic field is produced around the wire.

  • The field lines are concentric circles centred on the wire, in a plane at right angles to the wire.
  • The strength of the field depends on the current (a bigger current gives a stronger field) and the distance from the wire (the field is weaker further away, so the circles get further apart).
  • The direction of the field depends on the direction of the current. Use the right-hand grip rule: grip the wire with your right hand with your thumb pointing along the current, and your fingers curl the way the field goes. Reversing the current reverses the field.
A straight wire seen end-on as a small circle containing a dot (current out of the page, towards you). 3 concentric circular field lines surround it, getting further apart further from the wire; arrows show the field going anticlockwise. (By the right-hand grip rule the field is anticlockwise as seen in the diagram. The field gets weaker with distance from the wire.)
Current out of the page (a dot): the field lines are anticlockwise circles. With the current into the page (a cross) they would be clockwise.

Demonstrating the magnetic effect of a current. Lay a long straight wire north-south just above a plotting compass, and connect it to a low-voltage d.c. supply through a switch. Close the switch and the needle turns; open it and the needle swings back to north; reverse the current and the needle turns the other way.

Solenoids

A solenoid is a long coil of wire. Shaping a wire into a solenoid increases the strength of the magnetic field that a current produces, because the fields of all the turns add together inside the coil.

A solenoid (a coil of wire) lies horizontally. Arrows on the leads show the current entering the coil at its right end and leaving at its left end, from a cell whose positive terminal is connected to the right lead. The left end is labelled N and the right end S. Inside the coil the field lines are straight, parallel and close together, with arrows pointing towards the left end; outside, they loop around from one end to the other like the field of a bar magnet, leaving the left end. (The left end is the north pole and the right end the south pole: seen from the left end the current flows anticlockwise. The field inside is strong and uniform.)
Inside the solenoid the field is strong and uniform. Outside, it has the shape of a bar magnet's field, with a north pole at one end and a south pole at the other.
  • Inside the solenoid the field is strong and uniform: the lines are straight, parallel and evenly spaced.
  • Outside, the field has a similar shape to that of a bar magnet. Field lines leave the north end, loop round to the south end and return through the coil from the S end to the N end.
  • To find the poles, look at one end of the coil. If the current flows anticlockwise round it, that end is a north pole; if it flows clockwise, that end is a south pole.
  • Reversing the current swaps the poles. The shape and strength of the field stay the same.

Electromagnets

An electromagnet is a solenoid with an iron core. The iron becomes an induced magnet in the solenoid's field, and its own field adds to the field of the coil, so the electromagnet is much stronger than the coil alone. Iron is used rather than steel because iron loses its magnetism quickly when the current stops, so the electromagnet can be switched off.

To make an electromagnet stronger:

  • increase the current;
  • increase the number of turns on the coil;
  • give it an iron core.

An electromagnet can be switched on and off, its strength can be changed by changing the current, and its poles can be swapped by reversing the current.

Physics only: you need to interpret diagrams of electromagnetic devices, such as electric bells, relays and circuit breakers, and explain how they work. Work through the diagram in order: when the current flows, the electromagnet attracts an iron part; that movement closes contacts, breaks a circuit or strikes a gong; when the current stops, the iron loses its magnetism and a spring returns the moving part.

Physics only: an electric door lock

A door lock has an iron bolt that a spring pushes out into the door frame. The other end of the bolt sits inside a solenoid. When a visitor's card is accepted, a current flows in the solenoid for 5 seconds. Explain how the lock works, and why the door stays locked in a power cut.

  • The current makes the solenoid an electromagnet. The iron bolt becomes an induced magnet and is attracted into the solenoid, squashing the spring and sliding out of the frame: the door is unlocked.
  • When the current stops, the field disappears and the iron loses its magnetism quickly, so the spring pushes the bolt back into the frame.
  • In a power cut there is no current, so the bolt is never pulled back and the door stays locked.

Remember

  • A current in a wire produces a magnetic field of circles around the wire.
  • The field is stronger with a bigger current and closer to the wire.
  • A solenoid's field is strong and uniform inside and shaped like a bar magnet's field outside.
  • An electromagnet is a solenoid with an iron core.

Common mistakes

  • Drawing the field of a straight wire as straight lines or with poles. It is circles centred on the wire, further apart further away.
  • Saying the field inside a solenoid runs from N to S. Inside the coil it runs from the S end to the N end.
  • Choosing steel for an electromagnet's core. Steel stays magnetised, so it could not be switched off: use iron.
  • Giving "increase the current" and "increase the potential difference" as two different ways to strengthen an electromagnet. They are the same idea: give more turns or an iron core as your other ways.

Exam tip

When you draw the field of a wire or a solenoid, add arrows: the marks are for the shape and the direction. To explain how a solenoid increases the magnetic effect, say that the fields of the turns add together inside the coil, giving a strong, uniform field, and that an iron core is magnetised and adds its own field.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.