Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Scalar and vector quantities

Practise 10 exam-style questions on Scalar and vector quantities for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Describe the difference between a scalar quantity and a vector quantity.

Model answer

A scalar quantity has magnitude (size) only. A vector quantity has both a magnitude and a direction.

Explanation

Both kinds of quantity have a size; the difference is that a vector also has a direction. Speed and mass are scalars, while velocity and force are vectors because they act in a particular direction.

Mark scheme
  1. 1 mark

    a scalar quantity has magnitude only

    allow size / amount for magnitude

  2. 1 mark

    a vector quantity has magnitude and (an associated) direction

    if magnitude is not mentioned, allow 1 mark for: a vector has a direction but a scalar does not

Question 2

2 marks

Temperature can have a negative value, for example −8 °C.

Explain why temperature is a scalar quantity even though it can be negative.

Model answer

Temperature has magnitude only; it does not act in any direction. The minus sign in −8 °C only shows that the temperature is below zero on the Celsius scale, not that it points in a direction.

Explanation

For a vector such as velocity, a negative sign means the opposite direction. For a scalar such as temperature, a negative value just means less than zero on the scale chosen. Whether a quantity is a vector depends on whether it has a direction, not on whether it can be negative.

Mark scheme
  1. 1 mark

    temperature has magnitude only / has no direction

    allow a scalar has magnitude only

  2. 1 mark

    the minus sign shows the value is below zero (on the scale), not a direction

    allow the negative sign shows it is colder than 0 °C

Question 3

3 marks

In a scale diagram, an arrow 4.0 cm long represents a force of 1.0 kN acting to the right.

Another force of 1400 N acts on the same object to the left.

Calculate the length of the arrow that represents the 1400 N force and describe how this arrow differs in direction from the first arrow.

Model answer

1.0 kN = 1000 N
Scale: 4.0 cm represents 1000 N, so 1 cm represents 250 N
Length = 1400 ÷ 250 = 5.6 cm
The 5.6 cm arrow points to the left, the opposite direction to the 4.0 cm arrow.

Explanation

Arrow length is proportional to the magnitude of the force, so first work out how many newtons each centimetre represents. Convert kilonewtons to newtons before comparing. The direction of the arrow shows the direction of the force, so a force acting the other way is drawn pointing the other way.

Mark scheme
  1. 1 mark

    1.0 kN = 1000 N so the scale is 1 cm represents 250 N

    allow 1 cm : 250 N or 0.004 cm per newton; an answer of 5.6 cm pointing to the left scores 3 marks

  2. 1 mark

    length = 1400 ÷ 250 = 5.6 cm

    allow ecf from an incorrect scale

  3. 1 mark

    the arrow points to the left / in the opposite direction to the first arrow

Question 4

3 marks

A diagram shows the velocities of two boats as arrows drawn to the same scale.

An arrow 5.0 cm long pointing east represents the velocity of a rowing boat, 2.0 m/s east.

The arrow for a ferry is 12.5 cm long and points west.

Determine the velocity of the ferry.

Model answer

Scale: 5.0 cm represents 2.0 m/s, so 1 cm represents 2.0 ÷ 5.0 = 0.4 m/s
Ferry: 12.5 × 0.4 = 5.0 m/s
Velocity of the ferry = 5.0 m/s west

Explanation

The arrow length is proportional to the magnitude of the velocity, so the ferry's arrow, 2.5 times as long, represents 2.5 times the speed. Velocity is a vector, so the answer must include the direction shown by the arrow.

Mark scheme
  1. 1 mark

    scale: 1 cm represents 0.4 m/s

    allow 2.0 ÷ 5.0 = 0.4; an answer of 5.0 m/s west scores 3 marks

  2. 1 mark

    12.5 × 0.4 = 5.0 (m/s)

    allow ecf from an incorrect scale; allow 12.5 ÷ 5.0 × 2.0 = 5.0

  3. 1 mark

    west

    direction needed for this mark; allow in the opposite direction to the rowing boat

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Scalar and vector quantities

The big idea

Every physical quantity has a size, called its magnitude: a number and a unit. Some quantities also need a direction before they are fully described. "20 N" is not a complete description of a force, but "20 N downwards" is. Direction is also why one journey can have a large distance but a small displacement.

Scalars and vectors

  • Scalar quantities have magnitude only.
  • Vector quantities have magnitude and an associated direction.
Scalars (magnitude only)Vectors (magnitude and direction)
distancedisplacement
speedvelocity
massweight (a force)
energy, time, temperatureforce, acceleration

To decide, ask: "Does it make sense to say which way it points?" A force can push left or right, but an amount of energy cannot point anywhere.

The first three rows are pairs. Distance is how far an object travels along its path; displacement is how far it ends up from its start, in a straight line, in a stated direction. Speed is how fast something moves; velocity is speed in a given direction. A cyclist riding round a circular track at a steady 9 m/s has a constant speed, but her velocity keeps changing because her direction keeps changing (see also: Distance and displacement; Velocity).

A minus sign does not make a quantity a vector. For a vector along a line, the sign shows direction: −4 m/s means 4 m/s in the opposite direction to the one chosen as positive. A temperature of −4 °C is just a value below zero on the scale, and temperature is still a scalar.

Drawing vectors as arrows

A vector can be shown by an arrow. The length of the arrow represents the magnitude, and the direction of the arrow shows the direction of the vector. An arrow twice as long, drawn to the same scale, shows a vector twice as big.

Finding and using the scale of an arrow

On a map, an arrow 6.5 cm long pointing north shows the velocity of a ship, 13 m/s north. How long should an arrow be for a boat moving at 4.0 m/s east, drawn to the same scale?

Scale: \(13 \div 6.5 = 2.0\) m/s for each centimetre of arrow

Length of the new arrow: \(4.0 \div 2.0 = 2.0\text{ cm}\)

The arrow is 2.0 cm long and points east (to the right on a map with north at the top).

Common mistakes

  • Defining a scalar as a quantity that "has magnitude". A vector has magnitude too: a scalar has magnitude only (or no direction).
  • Giving a displacement or velocity without a direction, such as "60 m". Write "60 m west".
  • Saying a car moving round a bend at a steady speed has a constant velocity. Its direction changes, so its velocity changes.
  • Calling weight a scalar. Weight is a force, so it is a vector; mass is the scalar.

Exam tip

In "which two quantities are vectors?" questions, give exactly the number asked for: each extra answer cancels a correct one. When you explain a difference, use the words "magnitude" and "direction": "velocity has magnitude and direction; speed has magnitude only".

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.