Practise 10 exam-style questions on Distance and displacement for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.
10 questions
1–4 marks each
Instant marking
No sign-up needed
10 questions, marked as you go
Sample questions with model answers
Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.
Question 1
2 marks
Describe the difference between distance and displacement.
Model answer
Distance is how far an object moves along its path; it does not involve direction, so it is a scalar. Displacement is the distance measured in a straight line from the start point to the finish point, together with the direction of that line, so it is a vector.
Explanation
Distance depends on the route taken; displacement depends only on where the object starts and finishes. Displacement must always be given with a direction, for example 200 m east.
Mark scheme
1 mark
distance is how far an object moves and has no direction / is a scalar
1 mark
displacement is the straight-line distance from the start point to the finish point and includes its direction / is a vector
both straight line (start to finish) and direction needed for this mark
Question 2
2 marks
A swimmer swims three lengths of a 50 m swimming pool, starting at the shallow end.
Give the distance swum and the swimmer's displacement at the end of the three lengths.
Model answer
Distance = 3 × 50 = 150 m After three lengths the swimmer is at the deep end, so the displacement is 50 m from the shallow end towards the deep end.
Explanation
Each length adds 50 m to the distance. Two lengths take the swimmer back to the start (zero displacement), so after three lengths she is one length, 50 m, from where she began.
Mark scheme
1 mark
distance = 150 m
1 mark
displacement = 50 m towards the deep end / from the shallow end to the deep end
direction needed for this mark
Question 3
3 marks
A lift (elevator) goes up 12 m from the ground floor to the fourth floor. It then goes down 8 m to the first floor.
Give the total distance travelled by the lift and its displacement from the ground floor.
Model answer
Distance travelled = 12 + 8 = 20 m Displacement = 12 − 8 = 4 m upwards (above the ground floor)
Explanation
The lift moved 20 m in total, but it finishes only 4 m above where it started. Displacement compares the start and finish positions and includes the direction, here upwards.
Mark scheme
1 mark
distance = 12 + 8 = 20 (m)
1 mark
displacement = 12 − 8 = 4 (m)
1 mark
upwards / above the ground floor
direction needed for this mark
Question 4
3 marks
A ball is dropped from a height of 1.5 m above the floor. It bounces and is caught at the top of its bounce, 1.0 m above the floor.
Calculate the total distance travelled by the ball and its displacement when it is caught.
Model answer
Distance = 1.5 m down + 1.0 m up = 2.5 m Displacement = 1.5 − 1.0 = 0.5 m downwards (the ball is caught 0.5 m below where it was dropped)
Explanation
The ball travels down and then up, so the distance adds both parts. The displacement only compares the starting and finishing positions: the ball finishes 0.5 m lower than it started.
Mark scheme
1 mark
distance = 1.5 + 1.0 = 2.5 (m)
1 mark
displacement = 1.5 − 1.0 = 0.5 (m)
1 mark
downwards
direction needed for this mark; allow below the starting point
Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.
Ctrl + Enter to check
Study HelperHints first, answers after you try
Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.