Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Acceleration

Practise 18 exam-style questions on Acceleration for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A car accelerates from rest to a velocity of 24 m/s in 8.0 s.

Calculate the acceleration of the car.

Model answer

a = Δv ÷ t
a = (24 − 0) ÷ 8.0
a = 3.0 m/s²

Explanation

The change in velocity is final velocity minus initial velocity. Starting from rest means the initial velocity is zero.

Mark scheme
  1. 1 mark

    a = 24 ÷ 8.0

    an answer of 3 m/s² scores 2 marks

  2. 1 mark

    3.0 (m/s²)

Question 2

2 marks

Part of the velocity–time graph for a car is a straight line with a negative gradient.

What does this tell you about the motion of the car during that time?

Model answer

A straight line with a negative gradient shows that the car is slowing down (decelerating) at a constant rate. The size of the gradient is the deceleration.

Explanation

The gradient of a velocity–time graph is the acceleration. A negative gradient means the velocity is decreasing, and a straight line means the rate of change is constant.

Mark scheme
  1. 1 mark

    the car is slowing down / decelerating

  2. 1 mark

    at a constant rate / the deceleration is uniform (and equal to the size of the gradient)

Question 3

3 marks

An aircraft starts from rest and accelerates uniformly along a runway at 2.5 m/s². It takes off when its velocity is 70 m/s.

The equation linking final velocity (v), initial velocity (u), acceleration (a) and distance (s) is:

v² − u² = 2 × a × s

Calculate the length of runway the aircraft uses.

Model answer

v² − u² = 2 a s
70² − 0² = 2 × 2.5 × s
4900 = 5.0 × s
s = 4900 ÷ 5.0 = 980 m

Explanation

Starting from rest means u = 0. Square the final velocity before rearranging: s = (v² − u²) ÷ 2a.

Mark scheme
  1. 1 mark

    70² − 0² = 2 × 2.5 × s

    an answer of 980 m scores 3 marks

  2. 1 mark

    s = 4900 ÷ 5.0

  3. 1 mark

    980 (m)

Question 4

4 marks

A stone is dropped down a well. It falls 20 m before it hits the water. Ignore air resistance.

acceleration due to gravity = 9.8 m/s²

v² − u² = 2 × a × s

Calculate the velocity of the stone when it hits the water.
Give your answer to 3 significant figures.

Model answer

v² − u² = 2 a s
v² − 0² = 2 × 9.8 × 20
v² = 392
v = √392 = 19.799... m/s
v = 19.8 m/s (3 s.f.)

Explanation

The stone is dropped, so its initial velocity is zero, and it falls freely with an acceleration of 9.8 m/s². Remember the final step: the equation gives v², so take the square root.

Mark scheme
  1. 1 mark

    v² − 0 = 2 × 9.8 × 20

    an answer of 19.8 m/s scores 4 marks

  2. 1 mark

    v² = 392

  3. 1 mark

    v = √392 = 19.79...

    allow ecf from an incorrect v²

  4. 1 mark

    19.8 (m/s)

    allow ecf: their answer correctly given to 3 significant figures

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Acceleration

The big idea

Acceleration is how quickly velocity changes: the change in velocity each second. Speeding up, slowing down and changing direction all involve acceleration. You need to calculate it, find it from a velocity–time graph, use the equation for uniform acceleration and explain how falling objects reach a terminal velocity.

Calculating acceleration

\[\text{acceleration} = \dfrac{\text{change in velocity}}{\text{time taken}}\]
\[a = \dfrac{\Delta v}{t}\]
  • acceleration, a, in metres per second squared, m/s²
  • change in velocity, Δv, in metres per second, m/s
  • time, t, in seconds, s

You must recall this equation. The change in velocity is final velocity − initial velocity. An acceleration of 3 m/s² means the velocity increases by 3 m/s every second. An object that slows down is decelerating: its acceleration is negative, so −2 m/s² is a deceleration of 2 m/s².

Velocity–time graphs

The gradient of a velocity–time graph is the acceleration.

Shape of the lineMotion
Horizontal lineConstant velocity (zero acceleration)
Straight line sloping upConstant (uniform) acceleration
Steeper lineGreater acceleration
Straight line sloping downUniform deceleration
Line along the time axisStationary
CurveAcceleration is changing

To draw a velocity–time graph from measurements (for example, speeds from light gates at known times), put time on the x-axis and velocity on the y-axis, plot each point, and draw a straight line or smooth curve of best fit. A straight line through the points means uniform acceleration.

Line graph of velocity in m/s (y-axis, 0 to 4) against time in s (x-axis, 0 to 16). The line joins the points (0, 0), (3, 3), (13, 3), (16, 0).
A lift rising from the ground floor: it speeds up for 3 s, moves steadily at 3 m/s, then slows down and stops at 16 s.

Acceleration of a lift

Use the graph to find the lift's acceleration in the first 3 s and in the last 3 s.

First 3 s: \(a = \dfrac{3 - 0}{3 - 0} = 1.0\) m/s²

Last 3 s: \(a = \dfrac{0 - 3}{16 - 13} = -1.0\) m/s², a deceleration of 1.0 m/s²

Higher tier only

Distance from the area. The area under a velocity–time graph is the distance travelled (or displacement). Split the area into rectangles and triangles. For the lift:

\(\tfrac{1}{2} \times 3 \times 3 + 10 \times 3 + \tfrac{1}{2} \times 3 \times 3 = 4.5 + 30 + 4.5 = 39\) m, so the lift rises 39 m: thirteen floors, if each floor is 3.0 m high.

For a curved graph, count squares: work out the distance one square stands for (its width in s × its height in m/s), count the squares under the line (part squares that are half or more count as one), then multiply.

Uniform acceleration

When the acceleration is constant, this equation links velocities, acceleration and distance:

\[(\text{final velocity})^2 - (\text{initial velocity})^2 = 2 \times \text{acceleration} \times \text{distance}\]
\[v^2 - u^2 = 2as\]
  • final velocity, v, and initial velocity, u, in m/s
  • acceleration, a, in m/s²
  • distance, s, in metres, m

This equation is given on the Physics equation sheet. Near the Earth's surface, any object falling freely under gravity accelerates at about 9.8 m/s².

Runway length

An airliner must reach 270 km/h to take off. It accelerates uniformly from rest at 2.5 m/s². Calculate the shortest runway it can use.

\(270 \div 3.6 = 75\) m/s

\(v^2 - u^2 = 2as\): \(75^2 - 0^2 = 2 \times 2.5 \times s\)

\(5625 = 5.0 \times s\), so \(s = 1125\) m (about 1.1 km)

Estimating accelerations: choose a sensible change in velocity and time, then divide. A train leaving a station ~ 0.5 m/s²; a bus pulling away ~ 1 m/s² (0 to 10 m/s in about 10 s); a car braking hard ~ 7 m/s² (a deceleration); free fall 9.8 m/s². Everyday vehicles accelerate at a fraction of 9.8 m/s².

Falling through a fluid

An object falling through a fluid (a liquid or a gas) at first accelerates due to the force of gravity. As it speeds up, the resistive force (air resistance or drag) increases, until it equals the weight. The resultant force is then zero, and the object falls at a steady speed: its terminal velocity.

Physics only: you should draw and interpret velocity–time graphs for objects that reach terminal velocity, and explain each part using the forces. The graph starts steep (weight much bigger than air resistance), becomes less steep (air resistance growing, so the resultant force and the acceleration fall), then flattens (forces balanced).

Line graph of velocity in m/s (y-axis, 0 to 10) against time in s (x-axis, 0 to 5). The line is a smooth curve through (0, 0), (0.25, 2.15), (0.5, 3.72), (0.75, 4.87), (1, 5.71), (1.5, 6.77), (2, 7.34), (2.5, 7.65), (3, 7.81), (4, 7.95), (5, 7.98).
Physics only: a raindrop falling from rest reaches a terminal velocity of about 8 m/s after about 3 s.

Common mistakes

  • Using the final velocity instead of the change in velocity in \(a = \dfrac{\Delta v}{t}\).
  • Reading a horizontal line on a velocity–time graph as "stopped". It means constant velocity.
  • Working out \((v - u)^2\) instead of \(v^2 - u^2\): square each velocity first, then subtract.
  • Forgetting to square-root \(v^2\) at the end when finding a velocity.
  • Saying the forces are balanced while a falling object is still speeding up. They only balance at terminal velocity.

Exam tip

In calculations, write the equation, convert units (km/h to m/s) and show the change in velocity before you divide. On graph questions, read the y-axis label first, use a large triangle for the gradient and quote values from the graph. When a falling object is involved, compare the weight with the air resistance and say what that means for the resultant force.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.