Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Avg
score:
–
Topics
done:
0/31

Stopping distance

Practise 10 exam-style questions on Stopping distance for AQA GCSE Combined Science (Physics Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 10 questions
  • 1–4 marks each
  • Instant marking
  • No sign-up needed
10 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

Describe what is meant by the thinking distance and the braking distance of a vehicle.

Model answer

The thinking distance is the distance the vehicle travels during the driver's reaction time, before the brakes are applied. The braking distance is the distance the vehicle travels while the braking force acts, until it stops.

Explanation

During the reaction time the vehicle is still moving at its original speed, so it covers the thinking distance before it even starts to slow down. Adding the two distances gives the stopping distance.

Mark scheme
  1. 1 mark

    thinking distance: the distance the vehicle travels during the driver's reaction time

    allow the distance travelled between the driver seeing a hazard and applying the brakes

  2. 1 mark

    braking distance: the distance the vehicle travels under the braking force

    allow the distance travelled after the brakes are applied until the vehicle stops

Question 2

2 marks

The chart shows the thinking distance and braking distance for a typical car at different speeds, for the same braking force.

A driver travelling at 50 mph sees a fallen tree lying across the road 40 m ahead and makes an emergency stop. Determine whether the car stops before it reaches the tree.

Stacked bar chart with 6 vertical bars. The value axis (y-axis) is "Stopping distance in m", from 0 to 100 marked every 20; the bars are labelled along the x-axis, "Speed in mph", from left to right. Each bar is split into 2 parts, shown in the key: Thinking distance (bottom, blue) and Braking distance (top, orange). Values: 20 mph: thinking distance 6 m, braking distance 6 m, total 12 m; 30 mph: thinking distance 9 m, braking distance 14 m, total 23 m; 40 mph: thinking distance 12 m, braking distance 24 m, total 36 m; 50 mph: thinking distance 15 m, braking distance 38 m, total 53 m; 60 mph: thinking distance 18 m, braking distance 55 m, total 73 m; 70 mph: thinking distance 21 m, braking distance 75 m, total 96 m. The value of each part is printed on it. Each bar's total is printed above it.

Model answer

Stopping distance at 50 mph = thinking distance + braking distance = 15 + 38 = 53 m. This is greater than 40 m, so the car does not stop before it reaches the tree.

Explanation

The driver needs to compare the whole stopping distance, not just the braking distance, with the distance to the hazard. At 30 mph the stopping distance would be only 23 m and the car would stop in time.

Mark scheme
  1. 1 mark

    stopping distance at 50 mph = 15 + 38 = 53 m

  2. 1 mark

    53 m is greater than 40 m, so the car does not stop in time / hits the tree

Question 3

3 marks

The chart shows the thinking distance and braking distance for a typical car at different speeds, for the same braking force.

Describe how the thinking distance and the braking distance change as the speed increases.

Stacked bar chart with 6 vertical bars. The value axis (y-axis) is "Stopping distance in m", from 0 to 100 marked every 20; the bars are labelled along the x-axis, "Speed in mph", from left to right. Each bar is split into 2 parts, shown in the key: Thinking distance (bottom, blue) and Braking distance (top, orange). Values: 20 mph: thinking distance 6 m, braking distance 6 m, total 12 m; 30 mph: thinking distance 9 m, braking distance 14 m, total 23 m; 40 mph: thinking distance 12 m, braking distance 24 m, total 36 m; 50 mph: thinking distance 15 m, braking distance 38 m, total 53 m; 60 mph: thinking distance 18 m, braking distance 55 m, total 73 m; 70 mph: thinking distance 21 m, braking distance 75 m, total 96 m. The value of each part is printed on it. Each bar's total is printed above it.

Model answer

Thinking distance increases steadily with speed: it goes up by 3 m for every 10 mph, so it is proportional to speed (6 m at 20 mph, 12 m at 40 mph). Braking distance also increases with speed but by larger and larger amounts: from 20 mph to 40 mph it rises from 6 m to 24 m, four times as much, so at high speeds braking distance is the much larger part of the stopping distance.

Explanation

For a given braking force, the greater the speed, the greater the stopping distance. Both parts increase with speed, but braking distance increases much more rapidly than thinking distance.

Mark scheme
  1. 1 mark

    thinking distance increases in proportion to the speed / by 3 m for every 10 mph

    allow doubling the speed doubles the thinking distance

  2. 1 mark

    braking distance increases by larger amounts as speed increases / increases faster than thinking distance

    allow braking distance more than doubles when speed doubles

  3. 1 mark

    use of data, e.g. from 20 to 40 mph thinking distance doubles (6 to 12 m) but braking distance quadruples (6 to 24 m)

Question 4

3 marks

A car is travelling at 20 m/s. Its stopping distance is 44 m and its braking distance is 30 m.

Calculate the driver's reaction time.

Model answer

Thinking distance = stopping distance − braking distance = 44 − 30 = 14 m
Reaction time = thinking distance ÷ speed = 14 ÷ 20 = 0.70 s

Explanation

Find the thinking distance first by subtracting the braking distance from the stopping distance. During the reaction time the car moves at a constant speed, so time = distance ÷ speed.

Mark scheme
  1. 1 mark

    thinking distance = 44 − 30 = 14 (m)

    an answer of 0.7 s scores 3 marks

  2. 1 mark

    reaction time = 14 ÷ 20

    allow ecf from an incorrect thinking distance

  3. 1 mark

    0.70 (s)

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Revision notes

Stopping distance

The big idea

When a driver sees a hazard, the vehicle does not stop at once. It keeps moving while the driver reacts, and then while the brakes slow it down. The total, the stopping distance, grows quickly with speed, which is why speed limits and safe gaps between vehicles matter so much.

Thinking distance and braking distance

\[\text{stopping distance} = \text{thinking distance} + \text{braking distance}\]
  • Thinking distance: the distance the vehicle travels during the driver's reaction time, between seeing the hazard and applying the brakes. The vehicle is still moving at full speed, so thinking distance = speed × reaction time. This is \(s = vt\), which you must recall.
  • Braking distance: the distance the vehicle travels under the braking force, from when the brakes are applied until it stops.

The driver affects the thinking distance (see also: Reaction time). The road, the weather and the vehicle affect the braking distance (see also: Factors affecting braking distance 1).

How speed affects stopping distance

For a given braking force, the greater the speed of the vehicle, the greater the stopping distance. Both parts grow, but not in the same way:

  • Thinking distance is directly proportional to speed. The reaction time is the same, so double the speed means double the distance.
  • Braking distance increases much faster. A faster vehicle has much more kinetic energy, which depends on speed squared, so doubling the speed makes the braking distance four times as long.

So at high speeds the braking distance is most of the stopping distance, and doubling the speed more than doubles the stopping distance.

Stacked bar chart with 5 vertical bars. The value axis (y-axis) is "Distance in m", from 0 to 100 marked every 10; the bars are labelled along the x-axis, "Speed in m/s", from left to right. Each bar is split into 2 parts, shown in the key: Thinking distance (bottom, blue) and Braking distance (top, orange). Values: 10 m/s: thinking distance 7.0 m, braking distance 8.3 m, total 15.3 m; 15 m/s: thinking distance 10.5 m, braking distance 18.8 m, total 29.3 m; 20 m/s: thinking distance 14.0 m, braking distance 33.3 m, total 47.3 m; 25 m/s: thinking distance 17.5 m, braking distance 52.1 m, total 69.6 m; 30 m/s: thinking distance 21.0 m, braking distance 75.0 m, total 96.0 m. The value of each part is printed on it. Each bar's total is printed above it.
Typical stopping distances for a car on a dry road (reaction time 0.7 s, braking deceleration 6 m/s²). Thinking distance rises steadily; braking distance rises much faster.

Physics only: you should be able to estimate how the distance for a vehicle to make an emergency stop varies over a range of speeds typical for that vehicle.

Physics only: a cyclist's emergency stop

A cyclist braking hard from 4 m/s has a braking distance of about 2.5 m. Her reaction time is about 0.7 s. Estimate her stopping distance at 4 m/s and at 8 m/s.

At 4 m/s: thinking distance \(= 4 \times 0.7 = 2.8\) m; stopping distance \(\approx 2.8 + 2.5 = 5.3\) m

At 8 m/s the speed doubles, so the thinking distance doubles to 5.6 m and the braking distance is \(2^2 = 4\) times as long: \(4 \times 2.5 = 10\) m.

Stopping distance \(\approx 5.6 + 10 \approx 16\) m: about three times as far, for twice the speed.

Physics only: you will be asked to interpret graphs relating speed to stopping distance for a range of vehicles. Read each curve at the same speed to compare vehicles, or read across from a distance to find the highest safe speed. Heavier vehicles have more kinetic energy at the same speed and a smaller deceleration for a similar braking force, so their curves rise more steeply.

Line graph of stopping distance in m (y-axis, 0 to 120) against speed in m/s (x-axis, 0 to 30). "Car" is a smooth curve through (0, 0), (5, 5.58), (10, 15.3), (15, 29.3), (20, 47.3), (25, 69.6), (30, 96). "Van" (dashed) is a smooth curve through (0, 0), (5, 6), (10, 17), (15, 33), (20, 54), (25, 80), (30, 111). "Lorry" is a smooth curve through (0, 0), (5, 6.63), (10, 19.5), (15, 38.6), (20, 64), (25, 95.6).
Physics only: typical stopping distances for three vehicles (the lorry line stops at 25 m/s, about its top speed on UK roads). At 25 m/s the lorry needs about 96 m, the car about 70 m.

Common mistakes

  • Giving only the braking distance when asked for the stopping distance. Add the thinking distance.
  • Saying that doubling the speed doubles the stopping distance. Only the thinking distance doubles; the braking distance becomes four times as long.
  • Using a speed in km/h or mph with a reaction time in seconds. Convert to m/s first.
  • Saying the brakes are working during the thinking distance. The vehicle is still at full speed.

Exam tip

When comparing a stopping distance with the distance to a hazard, work out both parts, add them, and then say clearly whether the vehicle stops in time and by how much. In "explain" answers, link braking distance to kinetic energy and speed squared.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.