Set the arm of a protractor to make an angle of a given size, to 10, 5 or 1 degree.
Score0 of 10 answers: your score shows after 10★ Mastered
About this skill
Making an angle is a quick practice skill in Measuring and classifying angles for Year 5 Maths. There is a new question every time, answered by tapping and marked straight away, and the questions get harder as you get more right. Get 10 right in a row to master it.
A new question every time
3 levels
Instant marking
No sign-up needed
Example questions with answers
One question from each level, with its answer and an explanation.
Example 1
Level 1: first steps
Make an angle of 50°. One arm lies along the base line of the protractor, pointing right. Set the other arm.
Set the protractor: one arm lies along the base line, pointing right; turn the other arm to make the angle, in steps of 10 degrees.
Answer
50°
Explanation
The fixed arm points right, through 0 on the inner scale. Count round the inner scale from 0 to 50 and set the other arm there. A common mistake is 130°, from setting the arm at 50 on the outer scale.
Example 2
Level 2: a bit harder
Make an angle of 45°. One arm lies along the base line of the protractor, pointing right. Set the other arm.
Set the protractor: one arm lies along the base line, pointing right; turn the other arm to make the angle, in steps of 5 degrees.
Answer
45°
Explanation
The fixed arm points right, through 0 on the inner scale. Count round the inner scale from 0 to 45 and set the other arm there. A common mistake is 135°, from setting the arm at 45 on the outer scale.
Example 3
Level 3: hardest
Make an angle that is 84° bigger than a right angle. One arm lies along the base line of the protractor, pointing right. Set the other arm.
Set the protractor: one arm lies along the base line, pointing right; turn the other arm to make the angle, in steps of 1 degree.
Answer
174°
Explanation
A right angle is 90°, so the angle is 90° + 84° = 174°. The fixed arm points right, through 0 on the inner scale. Count round the inner scale from 0 to 174 and set the other arm there. A common mistake is 6°, from setting the arm at 174 on the outer scale.
More practice on Measuring and classifying angles: