Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Tests for gases, cations and anions, and flame tests

Practise 16 exam-style questions on Tests for gases, cations and anions, and flame tests for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student adds dilute nitric acid and then silver nitrate solution, AgNO₃(aq), to potassium iodide solution, KI(aq). A yellow precipitate of silver iodide forms.

Which is the ionic equation for the formation of the precipitate?

Choose your answer.

  • A Ag⁺(aq) + I⁻(aq) → AgI(aq)
  • B Ag⁺(aq) + I⁻(aq) → AgI(s)
  • C Ag⁺(aq) + I₂(aq) → AgI₂(s)
  • D K⁺(aq) + NO₃⁻(aq) → KNO₃(s)

Model answer

B

Explanation

In the test for halide ions the precipitate is the silver halide, formed from Ag⁺ ions and the halide ions; the other ions stay dissolved. An ionic equation shows only the ions that change, with state symbols, and it must balance in atoms and in charge. Silver chloride is white, silver bromide is cream and silver iodide is yellow.

Mark scheme
  1. 1 mark

    B / Ag⁺(aq) + I⁻(aq) → AgI(s)

    The only correct answer is B: silver ions from the silver nitrate and iodide ions from the potassium iodide join to form solid silver iodide, and the potassium ions and nitrate ions are spectator ions, so they are left out. A is not correct because silver iodide is a precipitate, so its state symbol is (s), not (aq); C is not correct because the solution contains iodide ions, I⁻, not iodine molecules, and AgI₂ is the wrong formula (the charges do not balance); D is not correct because potassium ions and nitrate ions are spectator ions, and potassium nitrate is soluble, so it stays in solution. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Iron tablets contain iron(II) sulfate. A pharmacist dissolves an old iron tablet in water and adds a few drops of sodium hydroxide solution.

Most of the precipitate is green, but some of it is orange-brown. This shows that some of the iron(II) ions in the tablet have been changed into iron(III) ions by oxygen in the air.

Write the half equation for the change of an iron(II) ion into an iron(III) ion.

Explain whether this change is oxidation or reduction.

Model answer

Fe²⁺ → Fe³⁺ + e⁻

This is oxidation, because each iron(II) ion loses an electron, and oxidation is the loss of electrons.

Explanation

Iron forms ions with two different charges, and the sodium hydroxide test shows which is present: a green precipitate for iron(II) and an orange-brown precipitate for iron(III). When Fe²⁺ becomes Fe³⁺ its charge goes up by one, so it has lost one electron, and loss of electrons is oxidation. A common mistake is to put the electron on the left-hand side, which leaves the charges unbalanced.

Mark scheme
  1. 1 mark

    Fe²⁺ → Fe³⁺ + e⁻

    ALLOW Fe²⁺ − e⁻ → Fe³⁺. ALLOW e for e⁻. ALLOW multiples. IGNORE state symbols.

  2. 1 mark

    oxidation, because the iron(II) ion loses an electron

    DO NOT ALLOW reduction. DO NOT ALLOW oxidation with a reason about gaining oxygen only. This mark can be awarded even if the half equation is wrong.

Question 3

3 marks

A student has two colourless solutions, A and B. One is calcium chloride solution and the other is zinc chloride solution.

The student adds sodium hydroxide solution, drop by drop, to 2 cm³ of each solution and records what is seen. The table shows the results.

Identify which solution is zinc chloride solution. Explain your answer.

Describe one other test that would confirm which solution contains calcium ions, and give its result.

Table with columns "Drops of sodium hydroxide solution added", "Solution A", "Solution B". Drops of sodium hydroxide solution added: 3; Solution A: white precipitate; Solution B: white precipitate | Drops of sodium hydroxide solution added: 10; Solution A: more white precipitate; Solution B: more white precipitate | Drops of sodium hydroxide solution added: 40 (excess); Solution A: white precipitate still present; Solution B: precipitate has dissolved; colourless solution.

Model answer

B is zinc chloride solution. Both solutions give a white precipitate with a few drops of sodium hydroxide, but in B the precipitate dissolves in excess sodium hydroxide to give a colourless solution. Zinc hydroxide dissolves in excess sodium hydroxide, but calcium hydroxide does not.

To confirm that A contains calcium ions, do a flame test on solution A: calcium ions give an orange-red flame.

Explanation

Calcium ions and zinc ions both give white precipitates with a few drops of sodium hydroxide, so the sodium hydroxide must be added until it is in excess: only the zinc hydroxide dissolves. A flame test then gives positive evidence for calcium ions (orange-red). Adding silver nitrate would not help, because both solutions contain chloride ions.

Mark scheme
  1. 1 mark

    B (is zinc chloride solution)

    ALLOW A is calcium chloride solution.

  2. 1 mark

    the white precipitate formed by zinc ions (zinc hydroxide) dissolves in excess sodium hydroxide, but the precipitate formed by calcium ions does not

    ALLOW the precipitate in B dissolved in excess but the precipitate in A did not. This mark depends on B being identified as zinc chloride.

  3. 1 mark

    flame test (on solution A): orange-red flame

    The test and its result are both needed. ALLOW brick red / red-orange / dull red / red. ALLOW a description of a flame test, such as dipping a clean nichrome wire loop into solution A and holding it in a blue Bunsen flame. ALLOW add dilute sulfuric acid or sodium sulfate solution: a white precipitate (of calcium sulfate) forms with solution A but not with solution B. DO NOT ALLOW orange on its own or yellow (sodium ions). DO NOT ALLOW a test that cannot tell the solutions apart, such as adding silver nitrate solution (both solutions contain chloride ions).

Question 4

4 marks

A lawn treatment is sold as a powder. Its label says that it contains iron(II) sulfate and potassium chloride.

A student dissolves some of the powder in distilled water and carries out four tests on the solution. The table shows the results.

Explain what the results show about the ions in the solution.

The student concludes: 'These results prove that the powder is a mixture of iron(II) sulfate and potassium chloride.'

Explain why the results do not prove this.

Table with columns "Test", "Result". Test: flame test; Result: lilac flame | Test: add a few drops of sodium hydroxide solution; Result: green precipitate | Test: add dilute nitric acid, then silver nitrate solution; Result: white precipitate | Test: add dilute hydrochloric acid, then barium chloride solution; Result: white precipitate.

Model answer

The lilac flame shows potassium ions, K⁺. The green precipitate with sodium hydroxide shows iron(II) ions, Fe²⁺. The white precipitate with acidified silver nitrate shows chloride ions, Cl⁻, and the white precipitate with acidified barium chloride shows sulfate ions, SO₄²⁻.

The tests show which ions are in the solution, not which compounds were dissolved. When the solids dissolve, their ions separate. A mixture of iron(II) chloride and potassium sulfate would give the same four ions, Fe²⁺, K⁺, Cl⁻ and SO₄²⁻, so it would give exactly the same results.

Explanation

The flame test and the sodium hydroxide test identify positive ions; the silver nitrate and barium chloride tests identify negative ions. In a solution the ions move about independently and are no longer paired as they were in the solids, so the results show which ions are present but not which compounds they came from. A common error is to treat each result as identifying a whole compound.

Mark scheme
  1. 3 marks

    1 mark for each ion linked to its result, max 3: the lilac flame shows potassium ions, K⁺; the green precipitate (with sodium hydroxide) shows iron(II) ions, Fe²⁺; the white precipitate with (acidified) silver nitrate shows chloride ions, Cl⁻; the white precipitate with (acidified) barium chloride shows sulfate ions, SO₄²⁻

    1 mark for each ion correctly linked to its test result, max 3. ALLOW potassium, iron(II), chloride or sulfate without the word 'ions'. DO NOT ALLOW iron(III) ions for the green precipitate, or chlorine for chloride ions. An ion named without its result does not score. IGNORE descriptions of how the tests are carried out.

  2. 1 mark

    the tests identify the ions in the solution, not the compounds that were dissolved: a mixture of iron(II) chloride and potassium sulfate would give the same four ions, so it would give the same results

    The idea that a different combination of compounds gives the same ions, or that the tests cannot show which positive ion was paired with which negative ion in the solid, is needed. ALLOW 'when the solids dissolve, the ions separate, so the tests cannot show how they were combined'. ALLOW the results cannot show that no other compound is present, for example a compound whose ions these tests do not detect, such as a nitrate. IGNORE 'the tests should be repeated'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.