Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Concentration of solutions and titration

Practise 17 exam-style questions on Concentration of solutions and titration for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student is getting ready to titrate sodium hydroxide solution with dilute hydrochloric acid. She rinses the inside of the conical flask with a little of the sodium hydroxide solution and pours it away, so the flask is left wet with the solution. She then uses a pipette to put 25.0 cm³ of the sodium hydroxide solution into the flask.

How does rinsing the flask with sodium hydroxide solution affect her titre?

Choose your answer.

  • A The titre is larger, because the flask contains extra moles of sodium hydroxide.
  • B The titre is smaller, because the sodium hydroxide in the flask is more concentrated.
  • C The titre is the same, because the concentration of the sodium hydroxide is unchanged.
  • D The titre is the same, because the pipette still delivers exactly 25.0 cm³ of the solution.

Model answer

A

The solution left on the inside of the flask is extra sodium hydroxide, on top of the 25.0 cm³ delivered by the pipette. The flask contains more moles of sodium hydroxide than the pipette measured, so more acid is needed to neutralise it and the titre is too large.

Explanation

The titre depends on the amount (moles) of alkali in the conical flask, and that amount must come only from the pipette. This is why the burette and the pipette are rinsed with the solutions they will contain, but the conical flask is rinsed only with distilled water. A common error is to think that the pipette alone fixes the amount of alkali: any solution already in the flask adds to it.

Mark scheme
  1. 1 mark

    A / The titre is larger, because the flask contains extra moles of sodium hydroxide.

    The only correct answer is A: the sodium hydroxide solution left on the inside of the flask adds to the 25.0 cm³ from the pipette, so the flask contains more moles of sodium hydroxide than the pipette measured, and more acid is needed to neutralise it. B is not correct because the solution left in the flask has the same concentration as the rest of the solution; C is not correct because, although the concentration is unchanged, the amount (moles) of sodium hydroxide in the flask has increased, and the titre depends on the amount; D is not correct because the pipette does deliver 25.0 cm³, but the solution already in the flask is added to it. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student investigates the carbon dioxide dissolved in a bottle of sparkling water. The bottle contains 500 cm³ of water.

She weighs the unopened bottle. She then opens it, leaves it until no more bubbles form, and weighs it again. The mass has decreased by 3.30 g.

Relative atomic mass (Ar): C = 12.0 O = 16.0

Calculate the concentration of carbon dioxide, in mol/dm³, in the water in the unopened bottle.

Assume that all of the decrease in mass is caused by carbon dioxide escaping from the water.

Model answer

Mr of CO₂ = 12.0 + (2 × 16.0) = 44.0
amount of CO₂ = 3.30 ÷ 44.0 = 0.0750 mol
volume of water = 500 cm³ = 0.500 dm³
concentration = 0.0750 ÷ 0.500 = 0.150 mol/dm³

Explanation

Concentration in mol/dm³ = amount of solute in moles ÷ volume of solution in dm³. The decrease in mass is the mass of carbon dioxide that was dissolved, so change it into moles with Mr = 44.0, and change 500 cm³ into 0.500 dm³. Leaving the volume in cm³ gives an answer 1000 times too small. In a real experiment a little water also evaporates, so this method slightly overestimates the carbon dioxide.

Mark scheme
  1. 1 mark

    amount of CO₂ = 3.30 ÷ 44.0 = 0.0750 / 7.50 × 10⁻² (mol); or a correct final answer of 0.150 mol/dm³ with no working

    An answer of 0.150 mol/dm³ with no working scores 2 marks. ALLOW 0.15 mol/dm³. ALLOW 1 mark for 1.5 × 10⁻⁴ or 0.00015 (the volume not converted from cm³ to dm³). ALLOW 1 mark for 6.60 g/dm³ (3.30 ÷ 0.500: the concentration in g/dm³, not converted to mol/dm³).

  2. 1 mark

    concentration = 0.0750 ÷ 0.500 = 0.150 (mol/dm³)

    ALLOW 0.15 or 1.5 × 10⁻¹ mol/dm³. ALLOW ECF from a wrong amount of carbon dioxide divided by 0.500 dm³.

Question 3

3 marks

Some household cleaners contain ammonia solution. A student dilutes a sample of a cleaner. She titrates 25.0 cm³ portions of the diluted solution with 0.0500 mol/dm³ sulfuric acid, using methyl orange indicator. Her mean titre, from concordant results, is 22.40 cm³.

2NH₃ + H₂SO₄ → (NH₄)₂SO₄

Calculate the concentration of ammonia in the diluted solution in mol/dm³.

Model answer

amount of H₂SO₄ = 0.0500 × 22.40 ÷ 1000 = 0.00112 mol
The equation shows 2 mol of NH₃ react with 1 mol of H₂SO₄, so amount of NH₃ = 2 × 0.00112 = 0.00224 mol
concentration of NH₃ = 0.00224 ÷ 0.0250 = 0.0896 mol/dm³

Explanation

Start with the solution whose concentration and volume are both known (the acid), use the 2 : 1 ratio from the equation, then divide by the volume of ammonia solution in dm³. Each H₂SO₄ reacts with two NH₃, so there are twice as many moles of ammonia as of acid. Ignoring the ratio, or using it the wrong way round, are the most common errors.

Mark scheme
  1. 1 mark

    amount of H₂SO₄ = 0.0500 × 22.40 ÷ 1000 = 0.00112 / 1.12 × 10⁻³ (mol); or a correct final answer of 0.0896 mol/dm³ with no working

    An answer of 0.0896 mol/dm³ with no working scores 3 marks. ALLOW 0.090 mol/dm³. ALLOW 2 marks for 0.0448 mol/dm³ (the 2 : 1 ratio not used) or for 0.0224 mol/dm³ (the ratio used the wrong way round). ALLOW 2 marks for 8.96 × 10⁻⁵ or 89.6 (one volume not converted from cm³ to dm³).

  2. 1 mark

    amount of NH₃ = 2 × 0.00112 = 0.00224 / 2.24 × 10⁻³ (mol); or a correct final answer of 0.0896 mol/dm³ with no working

    ALLOW ECF from a wrong amount of H₂SO₄.

  3. 1 mark

    concentration of NH₃ = 0.00224 ÷ 0.0250 = 0.0896 (mol/dm³)

    ALLOW 0.090 or 8.96 × 10⁻² mol/dm³. ALLOW ECF from a wrong amount of NH₃. ALLOW the route concentration of NH₃ = (2 × 0.0500 × 22.40) ÷ 25.0.

Question 4

4 marks

A student is given 0.208 g of a pure solid acid, X. The relative formula mass of X is 104.0.

She dissolves all of X in about 50 cm³ of distilled water in a conical flask, adds phenolphthalein, and titrates the solution with 0.125 mol/dm³ sodium hydroxide solution. The titre is 32.00 cm³.

The formula of X can be written as HₙY, where n is the number of hydrogen ions that each molecule of X releases when it reacts with sodium hydroxide.

Use the results to deduce the value of n. You must show your working.

Write a balanced equation for the reaction of X with sodium hydroxide, using your value of n.

Model answer

amount of X = 0.208 ÷ 104.0 = 0.00200 mol
amount of NaOH = 0.125 × 32.00 ÷ 1000 = 0.00400 mol
ratio X : NaOH = 0.00200 : 0.00400 = 1 : 2
Each mole of X neutralises 2 mol of hydroxide ions, so each molecule releases two hydrogen ions: n = 2.

H₂Y + 2NaOH → Na₂Y + 2H₂O

Explanation

The titration gives the amount of sodium hydroxide, and the mass and Mr give the amount of acid, so their ratio shows how many hydrogen ions each acid molecule releases. The volume of water used to dissolve the solid does not matter, because only the amount of acid in the flask affects the titre. Sulfuric acid, H₂SO₄, is another acid that releases two hydrogen ions per molecule, which is why it reacts with sodium hydroxide in a 1 : 2 ratio.

Mark scheme
  1. 1 mark

    amount of X = 0.208 ÷ 104.0 = 0.00200 / 2.00 × 10⁻³ (mol)

    An answer of n = 2 with no working scores 0 for marking points 1 to 3; the equation can still score marking point 4. IGNORE the volume of water used to dissolve X (it does not change the amount of acid).

  2. 1 mark

    amount of NaOH = 0.125 × 32.00 ÷ 1000 = 0.00400 / 4.00 × 10⁻³ (mol)

    ALLOW 4 × 10⁻³ mol.

  3. 1 mark

    mole ratio X : NaOH = 0.00200 : 0.00400 = 1 : 2, so n = 2

    ALLOW 'each mole of X reacts with 2 mol of NaOH, so each molecule releases two hydrogen ions'. ALLOW ECF from wrong amounts if the ratio is worked out and rounded to a whole number.

  4. 1 mark

    H₂Y + 2NaOH → Na₂Y + 2H₂O

    ALLOW ECF from a wrong value of n, for example n = 1: HY + NaOH → NaY + H₂O. ALLOW state symbols. ALLOW the ionic equation H₂Y + 2OH⁻ → Y²⁻ + 2H₂O.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.