Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Percentage yield, atom economy and reaction pathways

Practise 18 exam-style questions on Percentage yield, atom economy and reaction pathways for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Sodium ethanoate, CH₃COONa, is used as a food additive. A student makes sodium ethanoate by neutralising ethanoic acid with sodium hydroxide solution.

CH₃COOH + NaOH → CH₃COONa + H₂O

The student uses 0.150 mol of ethanoic acid and just enough sodium hydroxide to react with it. They obtain 10.5 g of dry sodium ethanoate.

Relative formula mass (Mr): CH₃COONa = 82.0

What is the percentage yield?

Choose your answer.

  • A 12.8%
  • B 14.6%
  • C 85.4%
  • D 117%

Model answer

C

Explanation

First find the theoretical yield: 0.150 mol of ethanoic acid can make 0.150 mol of sodium ethanoate, which is 0.150 × 82.0 = 12.3 g. Then percentage yield = actual yield ÷ theoretical yield × 100 = 10.5 ÷ 12.3 × 100 = 85.4%. Dividing the wrong way round gives an answer above 100%, which is a sign of an error.

Mark scheme
  1. 1 mark

    C / 85.4%

    The only correct answer is C: the ratio CH₃COOH : CH₃COONa is 1 : 1, so the theoretical yield = 0.150 × 82.0 = 12.3 g, and the percentage yield = 10.5 ÷ 12.3 × 100 = 85.4%. A is not correct because it divides the mass obtained by the Mr instead of by the theoretical yield (10.5 ÷ 82.0 × 100); B is not correct because it is the percentage of the theoretical yield that was lost ((12.3 − 10.5) ÷ 12.3 × 100); D is not correct because it divides the theoretical yield by the actual yield (12.3 ÷ 10.5 × 100), and the yield of a pure, dry product cannot be more than 100%. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student makes crystals of nickel(II) sulfate. She calculates that the theoretical yield of crystals is 3.40 g.

She collects the crystals in an evaporating basin and dries them. These are her results.

Mass of empty evaporating basin = 32.48 g
Mass of evaporating basin and dry crystals = 35.11 g

Calculate the percentage yield of nickel(II) sulfate crystals.

Model answer

Mass of crystals = 35.11 − 32.48 = 2.63 g
Percentage yield = (actual yield ÷ theoretical yield) × 100 = 2.63 ÷ 3.40 × 100 = 77.4%

Explanation

The actual yield is the mass of the crystals alone, so subtract the mass of the empty basin first. Then percentage yield = actual yield ÷ theoretical yield × 100. Forgetting to subtract the basin gives an impossible answer of more than 1000%, which is a warning that something has gone wrong.

Mark scheme
  1. 1 mark

    mass of crystals = 35.11 − 32.48 = 2.63 (g); or a correct final answer of 77.4% with no working

    An answer of 77.4% (or 77%) with no working scores 2 marks. DO NOT ALLOW 1030% or 1033% (35.11 ÷ 3.40 × 100: the mass of the basin has been included): it scores 0.

  2. 1 mark

    percentage yield = 2.63 ÷ 3.40 × 100 = 77.4 (%)

    ALLOW 77 or 77.35 (%). ALLOW ECF from a wrong mass of crystals (for example a subtraction error).

Question 3

3 marks

A technician recovers silver from a waste solution that contains silver nitrate, AgNO₃. She adds 0.635 g of copper powder to the solution. All of the copper reacts.

Cu(s) + 2AgNO₃(aq) → Cu(NO₃)₂(aq) + 2Ag(s)

She filters off the silver, washes it and dries it. The mass of silver is 2.03 g.

Calculate the percentage yield of silver.

Write the ionic equation for the reaction, including state symbols.

Relative atomic mass (Ar): Cu = 63.5 Ag = 107.9

Model answer

Amount of Cu = 0.635 ÷ 63.5 = 0.0100 mol
1 mol of Cu makes 2 mol of Ag, so amount of Ag = 0.0200 mol
Theoretical yield of Ag = 0.0200 × 107.9 = 2.158 g
Percentage yield = 2.03 ÷ 2.158 × 100 = 94.1%
Ionic equation: Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s)

Explanation

The copper is the limiting reactant, so the theoretical yield comes from the mass of copper and the 1 : 2 ratio in the equation. Leaving out the 2 gives a yield of 188%, which is impossible. In the ionic equation the nitrate ions are left out because they are spectator ions: they are in solution before and after the reaction.

Mark scheme
  1. 1 mark

    theoretical yield of silver = (0.635 ÷ 63.5) × 2 × 107.9 = 0.0100 × 2 × 107.9 = 2.158 (g); or a correct final answer of 94.1% with no working

    An answer of 94.1% (or 94% or 94.0%) with no working scores marking points 1 and 2. ALLOW 2.16 g. ALLOW ECF for marking point 2 from a wrong theoretical yield: for example 188% (1 : 1 ratio used, theoretical yield 1.079 g) scores marking point 2 only.

  2. 1 mark

    percentage yield = 2.03 ÷ 2.158 × 100 = 94.1 (%)

    ALLOW 94 or 94.0 (%) (from a theoretical yield rounded to 2.16 g).

  3. 1 mark

    Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s)

    1 mark for the correct balanced ionic equation with all four state symbols correct. ALLOW multiples. DO NOT ALLOW if nitrate ions are included (they are spectator ions). DO NOT ALLOW Cu + Ag⁺ → Cu²⁺ + Ag (not balanced for atoms or charge). ALLOW typed charges such as Ag+ and Cu2+.

Question 4

4 marks

Epoxyethane, C₂H₄O, is used to make antifreeze and plastics. It can be made from ethene, C₂H₄, by two routes.

Route 1 (chlorohydrin route): C₂H₄ + Cl₂ + Ca(OH)₂ → C₂H₄O + CaCl₂ + H₂O
Percentage yield = 90%

Route 2 (direct oxidation, using a silver catalyst): 2C₂H₄ + O₂ → 2C₂H₄O
Percentage yield = 80%

Calculate the mass of epoxyethane that route 1 makes from 1.00 tonne of ethene.

Relative formula mass (Mr): C₂H₄ = 28.0 C₂H₄O = 44.0

Most epoxyethane is now made by route 2, even though it makes less epoxyethane from each tonne of ethene. Suggest two reasons why route 2 is used.

Model answer

1 mol of ethene makes 1 mol of epoxyethane, so 28.0 tonnes of ethene makes 44.0 tonnes of epoxyethane.
Theoretical yield from 1.00 tonne = 1.00 × 44.0 ÷ 28.0 = 1.571 tonnes
Mass made = 1.571 × 90 ÷ 100 = 1.41 tonnes
Reasons for route 2: route 2 has an atom economy of 100% because epoxyethane is the only product, but route 1 also makes calcium chloride and water, about 2.5 tonnes of calcium chloride for every tonne of epoxyethane, which is waste that must be disposed of. Route 2 needs only ethene and oxygen from the air, which is cheap, but route 1 also uses chlorine and calcium hydroxide, which must be made or bought, and chlorine is toxic.

Explanation

Percentage yield is only one factor in choosing a reaction pathway. Route 1 gets more epoxyethane from each tonne of ethene, but it uses three reactants and turns most of their mass into waste calcium chloride (its atom economy is about 25%). Route 2 has no by-product and uses a free reactant, oxygen, which outweighs its lower yield.

Mark scheme
  1. 1 mark

    theoretical yield = 1.00 × 44.0 ÷ 28.0 = 1.571 (tonnes); or a correct final answer of 1.41 tonnes with no working

    An answer of 1.41 tonnes (or 1.4 tonnes or 1.414 tonnes) with no working scores marking points 1 and 2. ALLOW 1.57 tonnes. ALLOW the moles route: 1 000 000 g ÷ 28.0 = 35 700 mol of ethene, which makes 35 700 mol of epoxyethane (1 : 1 ratio).

  2. 1 mark

    mass made = 1.571 × 90 ÷ 100 = 1.41 (tonnes)

    ALLOW 1.4 or 1.414 (tonnes). ALLOW ECF from a wrong theoretical yield.

  3. 2 marks

    any two from: direct oxidation has a higher atom economy / makes no by-products, but the chlorohydrin route makes calcium chloride (and water) as waste that must be disposed of; direct oxidation needs only oxygen (from the air) as well as ethene, which is cheap, but the chlorohydrin route also needs chlorine and calcium hydroxide, which have to be made or bought; chlorine is toxic, so direct oxidation is safer / direct oxidation does not need chlorine to be transported or stored

    1 mark for each different reason, max 2. ALLOW route 2 has an atom economy of 100% and route 1 an atom economy of about 25%. ALLOW route 1 makes about 2.5 tonnes of calcium chloride for every tonne of epoxyethane. Higher atom economy and less waste count as one reason, not two. IGNORE 'route 2 is cheaper' or 'route 2 is faster' with no reason.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.