Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Methods for measuring rates of reaction

Practise 15 exam-style questions on Methods for measuring rates of reaction for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Four reactions each give off a gas. The volume of gas collected and the time taken are given for each reaction.

Which reaction has the greatest mean rate of reaction?

Choose your answer.

  • A 4.2 cm³ in 6 s
  • B 18 cm³ in 40 s
  • C 30 cm³ in 1 minute
  • D 75 cm³ in 2.5 minutes

Model answer

A. Mean rates: A 4.2 ÷ 6 = 0.70 cm³/s; B 18 ÷ 40 = 0.45 cm³/s; C 30 ÷ 60 = 0.50 cm³/s; D 75 ÷ 150 = 0.50 cm³/s. A is the greatest.

Explanation

Mean rate of reaction = amount of product formed ÷ time taken. To compare the rates they must all be in the same units, so convert 1 minute to 60 s and 2.5 minutes to 150 s first. The largest volume of gas does not mean the fastest reaction: D made the most gas but took the longest.

Mark scheme
  1. 1 mark

    A / 4.2 cm³ in 6 s

    The only correct answer is A: mean rate = volume ÷ time = 4.2 ÷ 6 = 0.70 cm³/s. B is not correct: 18 ÷ 40 = 0.45 cm³/s; C is not correct: 30 ÷ 60 = 0.50 cm³/s; D is not correct: 75 ÷ 150 = 0.50 cm³/s (the largest volume, but collected over the longest time). Choosing D usually comes from looking at the volume only; choosing C or D can also come from dividing by the time in minutes without converting it to seconds. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Sodium thiosulfate solution reacts with dilute hydrochloric acid:

Na₂S₂O₃(aq) + 2HCl(aq) → 2NaCl(aq) + H₂O(l) + SO₂(g) + S(s)

Sulfur dioxide is a toxic gas that is very soluble in water.

The rate of this reaction is usually followed by timing how long it takes for a cross under the flask to disappear.

Suggest two reasons why the rate is not followed by measuring the volume of sulfur dioxide given off or the loss in mass of the flask.

Model answer

Sulfur dioxide is very soluble in water, so most of it stays dissolved in the reaction mixture, and any collected over water would dissolve. The volume collected or the mass lost would not show how much had been made. Sulfur dioxide is also toxic, so a method that lets it escape into the room, such as loss in mass from an open flask, is a hazard.

Explanation

A method must measure a product (or reactant) that changes in a way that can be recorded. Here the gas mostly stays in solution and is harmful, but the sulfur forms a precipitate that makes the mixture cloudy, so timing how long the cross takes to disappear is the sensible method. Good answers use both pieces of information given in the question: the solubility and the toxicity.

Mark scheme
  1. 1 mark

    sulfur dioxide is very soluble, so much of it stays dissolved in the reaction mixture / would dissolve in the water if collected over water, so the volume collected or the mass lost does not show how much has been made

    1 mark for each reason, max 2. ALLOW 'the gas would not all escape from the solution, so the readings would be too low'. DO NOT ALLOW 'sulfur dioxide is insoluble' or 'no gas is made'. IGNORE 'the gas is colourless'.

  2. 1 mark

    sulfur dioxide is toxic, so letting it escape from an open flask on a balance (or collecting it) is a hazard / people could breathe it in

    ALLOW 'it is harmful to breathe in, so it should not be released into the room'. IGNORE 'it is dangerous' with no reference to breathing it in or releasing it.

Question 3

2 marks

A student follows the reaction between marble chips (an excess) and dilute hydrochloric acid using a pH probe connected to a data logger. Hydrogen ions are used up in the reaction:

CaCO₃(s) + 2H⁺(aq) → Ca²⁺(aq) + H₂O(l) + CO₂(g)

In the first 2 minutes, the pH of the mixture rises from 1.0 to 2.0.

Calculate the percentage of the hydrogen ions present at the start that react in the first 2 minutes.

Model answer

The pH rises by 1, so the hydrogen ion concentration falls by a factor of 10.
Hydrogen ions left = 1/10 = 10% of the starting amount.
Percentage that reacted = 100 − 10 = 90%.

Explanation

Each increase of 1 in pH means that the hydrogen ion concentration has become ten times smaller. So at pH 2.0 only one tenth of the starting hydrogen ions are left, and 90% have reacted. A pH probe can follow the rate of a reaction that uses up (or makes) hydrogen ions; a common mistake is to treat the pH scale as if it were linear.

Mark scheme
  1. 1 mark

    an increase of 1 in pH means the concentration of hydrogen ions falls by a factor of 10 / to one tenth (10%) of its starting value; or a correct final answer of 90% with no working

    An answer of 90% with no working scores 2 marks. ALLOW 1 mark for 10% (the percentage left, not the percentage that reacted). An answer of 50% (treating the pH change as halving the concentration) scores 0. Assume that the volume of the mixture does not change.

  2. 1 mark

    90 (%)

    ALLOW 0.9 of the hydrogen ions.

Question 4

4 marks

A student plans to measure the rate of reaction by timing how long a piece of magnesium ribbon takes to disappear in hydrochloric acid.

She will add 0.50 g of magnesium ribbon to 25.0 cm³ of hydrochloric acid with a concentration of 1.00 mol/dm³. She says that the acid will be in excess.

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

Relative atomic mass (Ar): Mg = 24.3

Determine whether the acid will be in excess. You must show your working.

Explain what your answer means for her plan.

Model answer

Amount of Mg = 0.50 ÷ 24.3 = 0.0206 mol.
Amount of HCl = (25.0 ÷ 1000) × 1.00 = 0.0250 mol.
From the equation, 1 mol of Mg reacts with 2 mol of HCl, so 0.0206 mol of Mg needs 0.0412 mol of HCl.
Only 0.0250 mol of HCl is present, so the acid is not in excess: it is the limiting reactant and the magnesium is in excess.
The reaction will stop when the acid is used up, leaving some magnesium unreacted, so the ribbon will never disappear and she cannot time how long it takes. She should use less than 0.30 g of magnesium, or more acid.

Explanation

To decide which reactant is in excess, compare the amounts in moles using the ratio in the balanced equation (here 1 Mg : 2 HCl), not the masses or the volumes. A common mistake is to compare 0.0206 mol with 0.0250 mol directly and decide that the acid is in excess. A reaction-time method only works if the reactant being watched is the limiting one, so that it is all used up.

Mark scheme
  1. 1 mark

    amount of Mg = 0.50 ÷ 24.3 = 0.0206 (mol)

    A conclusion about the acid with no working scores 0 for points 1 to 3 (the question says you must show your working); point 4 can still be awarded. ALLOW 0.021 mol or 0.02058 mol.

  2. 1 mark

    amount of HCl = (25.0 ÷ 1000) × 1.00 = 0.0250 (mol)

    ALLOW 0.025 mol.

  3. 1 mark

    0.0206 mol of Mg needs 2 × 0.0206 = 0.0412 mol of HCl, which is more than the 0.0250 mol present, so the acid is NOT in excess (the acid is the limiting reactant / the magnesium is in excess)

    ALLOW the other route: 0.0250 mol of HCl reacts with only 0.0125 mol of Mg = 0.304 g, which is less than 0.50 g, so the magnesium is in excess. ALLOW ECF from points 1 and 2. A comparison of 0.0206 mol with 0.0250 mol that ignores the 1 : 2 ratio does not score this mark.

  4. 1 mark

    the reaction stops when the acid is used up, so some magnesium is left over / the magnesium never completely disappears, so she cannot time how long it takes to disappear

    ALLOW a correct change linked to the acid being limiting, for example 'she should use less than 0.30 g of magnesium' or 'she should use more than 41 cm³ of the acid, or more concentrated acid'. IGNORE 'it is not a fair test'.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.