Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Factors affecting the rate of reaction

Practise 15 exam-style questions on Factors affecting the rate of reaction for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student finds that the rate of a reaction is directly proportional to the concentration of one of the reactants.

She plots a graph of rate of reaction (on the y-axis) against concentration (on the x-axis).

Which line would her graph show?

Choose your answer.

  • A a curve that rises steeply and then levels off
  • B a horizontal straight line
  • C a straight line that does not pass through the origin
  • D a straight line through the origin

Model answer

D - a straight line through the origin

Explanation

Two quantities are directly proportional when one is always the same multiple of the other, so their graph is a straight line that passes through (0, 0). A straight line that misses the origin is linear but not proportional. A quick test for proportionality is to check whether doubling one quantity doubles the other.

Mark scheme
  1. 1 mark

    D / a straight line through the origin

    The only correct answer is D: if the rate is directly proportional to the concentration, doubling the concentration doubles the rate and zero concentration gives zero rate, so the graph is a straight line through the origin. A is not correct because a curve that levels off shows a rate that increases by smaller and smaller amounts. B is not correct because a horizontal line shows a rate that does not change with concentration. C is not correct because a straight line that does not pass through the origin shows a linear relationship in which doubling the concentration does not double the rate. ALLOW the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

The colour of some hair dyes develops by a chemical reaction. A scientist measures how long the colour of one hair dye takes to develop fully at three temperatures.
• 20 °C: 40 minutes
• 30 °C: 20 minutes
• 40 °C: 10 minutes

A hairdresser says: 'Under a heated hood at 40 °C, the dye works twice as fast as at 20 °C, because the temperature is twice as high.'

Use the data to explain why the hairdresser is wrong.

Model answer

At 40 °C the colour develops in 10 minutes, compared with 40 minutes at 20 °C. It takes a quarter of the time, so the dye works four times as fast, not twice as fast. The rate is not directly proportional to the temperature in °C: each 10 °C rise doubles the rate.

Explanation

Rate is proportional to 1/time, so a quarter of the time means four times the rate. Use the data to test any claim of proportionality: here the time halves for every 10 °C rise, so the rate doubles each time. Even a small rise in temperature can have a large effect on the rate of a reaction.

Mark scheme
  1. 1 mark

    at 40 °C the colour develops in a quarter of the time (10 minutes compared with 40 minutes), so the dye works four times as fast (not twice as fast)

    ALLOW the rate at 40 °C is 4 times the rate at 20 °C. ALLOW the dye works twice as fast at 30 °C as at 20 °C and twice as fast again at 40 °C. Data must be used for this mark.

  2. 1 mark

    the rate is not (directly) proportional to the temperature (in °C) / the rate doubles for each 10 °C rise / a small rise in temperature has a large effect on the rate

    ALLOW doubling the temperature (in °C) does not double the rate. IGNORE the dye works faster when it is hotter, on its own.

Question 3

2 marks

Concrete is made by mixing cement, sand, gravel and water. It hardens because of slow chemical reactions between the cement and the water.

A builders' guide says:
• at 5 °C, concrete takes about three times as long to harden as it does at 20 °C
• in winter, mix the concrete with warm water.

Describe how temperature affects the rate of the hardening reactions, and suggest why warm water is used in winter.

Model answer

The lower the temperature, the slower the hardening reactions: at 5 °C the concrete takes three times as long to harden, so the rate is only about one third of the rate at 20 °C.

Mixing with warm water raises the temperature of the concrete, so the hardening reactions are faster and the concrete hardens sooner, even on a cold day.

Explanation

A rise in temperature increases the rate of a reaction, and a fall in temperature decreases it. If something takes three times as long, its rate is one third as fast, because rate is inversely proportional to the time taken. Builders control the temperature of the mixture to control how fast the concrete hardens.

Mark scheme
  1. 1 mark

    the lower the temperature, the slower the reactions / at 5 °C the rate is about one third of the rate at 20 °C

    ALLOW the higher the temperature, the faster the reactions. ALLOW the reactions are about three times as fast at 20 °C as at 5 °C.

  2. 1 mark

    warm water raises the temperature of the mixture, so the reactions are faster and the concrete hardens sooner

    ALLOW so the concrete hardens before it is damaged by frost / so the building work is not delayed, if linked to a faster reaction. IGNORE warm water mixes better / dissolves the cement better.

Question 4

4 marks

A scientist investigates the reaction between pieces of a metal carbonate and an acid. The same mass of carbonate, in pieces of the same size, is used each time.

With 0.50 mol/dm³ acid at 20 °C, the scientist measures an initial rate of reaction of 0.40 cm³ of gas per second.

The scientist knows two facts about this reaction:
• the initial rate is directly proportional to the concentration of the acid
• each 10 °C rise in temperature makes the reaction three times as fast.

Predict the initial rate of reaction:
• with 1.0 mol/dm³ acid at 30 °C
• with 0.25 mol/dm³ acid at 40 °C.

Model answer

1.0 mol/dm³ at 30 °C: the concentration is doubled (× 2) and there is one 10 °C rise (× 3)
rate = 0.40 × 2 × 3 = 2.4 cm³/s
0.25 mol/dm³ at 40 °C: the concentration is halved (× 0.5) and there are two 10 °C rises (× 3 × 3 = × 9)
rate = 0.40 × 0.5 × 9 = 1.8 cm³/s

Explanation

Treat each factor separately and multiply their effects: a direct proportion means halving the concentration halves the rate, and each 10 °C rise multiplies the rate by three. A 20 °C rise multiplies the rate by 3 × 3 = 9, not 3 + 3 = 6. The second mixture is more dilute but still reacts faster than the first one at 20 °C, because the effect of the temperature rise is larger.

Mark scheme
  1. 1 mark

    first condition: the rate is multiplied by 2 (concentration) × 3 (temperature) = 6 / 0.40 × 2 × 3; or a correct final answer of 2.4 cm³/s with no working

    An answer of 2.4 cm³/s and 1.8 cm³/s with no working scores 4 marks. IGNORE units.

  2. 1 mark

    first condition: 0.40 × 6 = 2.4 (cm³/s); or a correct final answer of 2.4 cm³/s with no working

    ALLOW 2.4 cm³ per second.

  3. 1 mark

    second condition: the rate is multiplied by 0.5 (concentration) × 3 × 3 (two 10 °C rises) = 4.5 / 0.40 × 0.5 × 9; or a correct final answer of 1.8 cm³/s with no working

    ALLOW this mark (but not marking point 4) if the working shows only one of the two factors correctly, for example 0.40 × 0.5 × 6 = 1.2 cm³/s (correct concentration factor, temperature factor added instead of multiplied) or 0.40 × 9 = 3.6 cm³/s (correct temperature factor, concentration not changed).

  4. 1 mark

    second condition: 1.8 (cm³/s)

    ALLOW 1.8 cm³ per second.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.