Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
OCR GCSE Chemistry (Paper 4) Smart practice A mixed round aimed at your weak spots
Unit 4
Predicting and identifying reactions and products
Unit 5
Monitoring and controlling chemical reactions
Unit 6
Global challenges
Unit 7
Practical skills
Avg
score:
–
Topics
done:
0/37

Explaining and predicting group properties

Practise 15 exam-style questions on Explaining and predicting group properties for OCR GCSE Chemistry (Paper 4). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Fluorine atoms gain an electron more easily than chlorine atoms.

Which statement compares the outer shell of a fluorine atom with the outer shell of a chlorine atom?

Choose your answer.

  • A closer to the nucleus; fewer inner shells
  • B closer to the nucleus; more inner shells
  • C further from the nucleus; fewer inner shells
  • D further from the nucleus; more inner shells

Model answer

A

Explanation

Going down Group 7, each atom has one more occupied shell. The outer shell is further from the nucleus and more shielded by inner electrons, so an incoming electron is attracted less strongly and is gained less easily. That is why reactivity decreases down Group 7 and fluorine is the most reactive halogen.

Mark scheme
  1. 1 mark

    A / closer to the nucleus; fewer inner shells

    A is correct: fluorine (2.7) has its outer shell in the second shell, with one inner shell, while chlorine (2.8.7) has its outer shell in the third shell, with two inner shells. So an electron entering fluorine's outer shell is closer to the nucleus and less shielded, and is attracted more strongly. B is not correct because fluorine has fewer inner shells, not more; C and D are not correct because fluorine's outer shell is closer to the nucleus than chlorine's, not further away. ALLOW the letter or the statement. If more than one option is given, do not award the mark.

Question 2

2 marks

The energy needed to remove the outer electron from one mole of atoms of some Group 1 elements is:

sodium 496 kJ   potassium 419 kJ   rubidium 403 kJ   caesium 376 kJ

Lithium is the element above sodium, at the top of Group 1.

Predict the energy needed to remove the outer electron from one mole of lithium atoms. Explain your prediction in terms of the structure of the atoms.

Model answer

About 530 kJ (any value a little above 496 kJ).

A lithium atom (2.1) has one fewer occupied shell than a sodium atom (2.8.1), so its outer electron is closer to the nucleus and less shielded by inner electrons. It is attracted more strongly, so more energy is needed to remove it.

Explanation

The energy falls down Group 1, so going up to lithium it must rise above sodium's value; the real value is 520 kJ. This is why lithium is the least reactive Group 1 metal: it reacts by losing its outer electron, and this is hardest for lithium.

Mark scheme
  1. 1 mark

    a value higher than 496 kJ (any value above 496 kJ, up to 650 kJ)

    The measured value is 520 kJ. ALLOW any value greater than 496 kJ and less than or equal to 650 kJ. IGNORE units.

  2. 1 mark

    the outer electron of lithium is closer to the nucleus / less shielded (fewer inner shells), so it is attracted more strongly and needs more energy to remove

    ALLOW lithium atoms are smaller / have fewer shells, so there is more attraction between the nucleus and the outer electron. The idea of stronger attraction is needed. DO NOT ALLOW lithium has fewer outer electrons.

Question 3

3 marks

The energy needed to remove one outer electron from one mole of atoms of four elements is:

neon 2081 kJ   argon 1521 kJ   sodium 496 kJ   potassium 419 kJ

Electron arrangements: neon 2.8   sodium 2.8.1   argon 2.8.8   potassium 2.8.8.1

Use the data and the electron arrangements to explain why sodium and potassium form positive ions in their reactions, but neon and argon do not.

Model answer

Removing an electron from neon needs 2081 kJ per mole, about four times as much as from sodium (496 kJ), and argon needs 1521 kJ compared with 419 kJ for potassium.

Sodium (2.8.1) and potassium (2.8.8.1) each have a single electron in a new outer shell. It is further from the nucleus and shielded by the full inner shells, so it is weakly attracted and easily lost, forming a 1+ ion.

Neon (2.8) and argon (2.8.8) have full outer shells. Their outer electrons are closer to the nucleus and less shielded, so they are strongly attracted and very hard to remove. So neon and argon do not form positive ions.

Explanation

Each noble gas sits just before a Group 1 metal in the Periodic Table, yet the energy to remove an electron drops sharply from one to the next. That drop happens because the Group 1 metal's outer electron starts a new shell, further out and well shielded. Good answers quote a pair of values from the data and link them to the shells.

Mark scheme
  1. 1 mark

    much more energy is needed to remove an electron from neon and argon than from sodium and potassium (for example 2081 kJ for neon compared with 496 kJ for sodium)

    Max 2 if no data are used. ALLOW about four times as much energy (neon v sodium) or about three to four times (argon v potassium).

  2. 1 mark

    sodium and potassium have one electron alone in a new outer shell, further from the nucleus and shielded by full inner shells, so it is weakly attracted and easily lost

    ALLOW sodium's outer electron is in the third shell, shielded by ten inner electrons. The idea of distance or shielding with weak attraction is needed.

  3. 1 mark

    the outer electrons of neon and argon are in a full outer shell, closer to the nucleus / less shielded, so they are strongly attracted and hard to remove (so neon and argon do not form ions)

    ALLOW neon and argon have full (stable) outer shells, so they do not lose electrons. IGNORE noble gases are unreactive, on its own.

Question 4

4 marks

The table shows the energy needed to remove electrons, one at a time, from one mole of sodium atoms and from one mole of magnesium atoms.

Electron arrangements: sodium 2.8.1   magnesium 2.8.2

Explain why sodium forms Na⁺ ions in its compounds, but magnesium forms Mg²⁺ ions. Refer to the energy values in the table and to the electron arrangements.

Table with columns "Element", "First electron (kJ)", "Second electron (kJ)", "Third electron (kJ)". Element: sodium; First electron (kJ): 496; Second electron (kJ): 4562; Third electron (kJ): 6912 | Element: magnesium; First electron (kJ): 738; Second electron (kJ): 1451; Third electron (kJ): 7733.

Model answer

Sodium (2.8.1) has one electron in its outer shell. Removing it needs only 496 kJ per mole, because it is far from the nucleus and shielded by two full inner shells. A second electron would have to come from the full second shell, which is much closer to the nucleus and less shielded, so it needs 4562 kJ, about nine times as much. So sodium loses only one electron and forms Na⁺.

Magnesium (2.8.2) has two electrons in its outer shell. Both can be removed with moderate amounts of energy (738 and 1451 kJ). A third electron would have to come from the full inner shell and needs 7733 kJ, so magnesium loses two electrons and forms Mg²⁺.

Explanation

The energy needed rises a little for each electron removed from the same shell, but jumps hugely when an electron has to be removed from a full inner shell, which is closer to the nucleus and less shielded. This is why the charge on a metal ion equals the number of electrons in the outer shell, which is the group number for Groups 1 and 2.

Mark scheme
  1. 1 mark

    the first electron removed from sodium is its single outer-shell (third-shell) electron, which needs little energy (496 kJ)

    Max 3 if no data from the table are used. ALLOW the outer electron of sodium is far from the nucleus / well shielded, so it is easily removed.

  2. 1 mark

    a second electron would have to come from sodium's full inner (second) shell, which is much closer to the nucleus and less shielded, so far more energy is needed (4562 kJ, about nine times as much), so sodium forms only Na⁺

    ALLOW the second electron is held much more strongly because it is in a shell closer to the nucleus.

  3. 1 mark

    magnesium's first two electrons both come from its outer (third) shell, so both can be removed with moderate amounts of energy (738 and 1451 kJ)

    ALLOW magnesium has two outer electrons, which are lost fairly easily.

  4. 1 mark

    a third electron would have to come from magnesium's full inner shell, which needs much more energy (7733 kJ), so magnesium forms Mg²⁺ (and not Mg³⁺)

    ALLOW ORA (allow the reverse argument) comparisons between the two elements.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.