Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

Units, prefixes, significant figures and standard form

Practise 15 exam-style questions on Units, prefixes, significant figures and standard form for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Resistors are often labelled using prefixes. Four resistors have the resistances shown.

Which resistor has the largest resistance?

Choose your answer.

  • A 47 kΩ
  • B 4.7 × 10⁶ mΩ
  • C 0.47 MΩ
  • D 4700 Ω

Model answer

C 0.47 MΩ

Explanation

Convert every value to ohms before comparing: kilo (k) is 10³, mega (M) is 10⁶ and milli (m) is 10⁻³. 0.47 MΩ = 470 000 Ω is the largest, even though 0.47 looks like the smallest number. Confusing the small m (milli) with the capital M (mega) makes option B look enormous, but it is only 4700 Ω.

Mark scheme
  1. 1 mark

    C / 0.47 MΩ (1)

    The only correct answer is C: mega (M) means 10⁶, so 0.47 MΩ = 470 000 Ω. A is not correct because kilo means 10³, so 47 kΩ = 47 000 Ω, ten times smaller than C; B is not correct because mΩ is the milliohm (10⁻³ Ω), not the megohm, so 4.7 × 10⁶ mΩ = 4700 Ω; D is not correct because 4700 Ω is 100 times smaller than C. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Sam hangs weights on a spring. Each extra 0.50 N of force stretches the spring by a further 2.0 cm. He writes:

spring constant = 0.50 ÷ 2.0 = 0.25 N/cm

The SI unit of spring constant is N/m.

Calculate the spring constant of Sam's spring in N/m.

Model answer

2.0 cm = 0.020 m
spring constant = 0.50 N ÷ 0.020 m = 25 N/m

Explanation

1 m = 100 cm, so a spring that needs 0.25 N to stretch it each centimetre needs 100 times as much force, 25 N, to stretch it a metre: 1 N/cm = 100 N/m. Dividing by 100 instead (0.0025 N/m) is the common error; a quick check is that the value per metre must be bigger than the value per centimetre.

Mark scheme
  1. 1 mark

    a correct conversion: 2.0 cm = 0.020 m / 1 N/cm = 100 N/m / 0.50 ÷ 0.020 / 0.25 × 100 (1)

    MP1 is for a correct conversion step, shown.

  2. 1 mark

    25 (N/m) (1)

    An answer of 25 (N/m) with no working scores 2 marks. 0.0025 (0.25 ÷ 100, the conversion done the wrong way) scores 0; any other wrong answer scores 0 unless a correct conversion step is seen (MP1).

Question 3

3 marks

In a motor effect experiment, a wire carrying a current of 2.5 A is held perpendicular to the magnetic field between two magnets. The magnetic flux density is 45 mT, and 6.0 cm of the wire is in the field.

Calculate the force on the wire. Give your answer in mN.

Use the equation
F = B × I × l

Model answer

B = 45 mT = 0.045 T and l = 6.0 cm = 0.060 m
F = B × I × l = 0.045 × 2.5 × 0.060 = 0.006 75 N
F = 6.75 mN (6.8 mN to 2 significant figures)

Explanation

Every quantity must be in SI units before it goes into the equation: milli means 10⁻³ and centi means 10⁻². The force then comes out in newtons, and is changed to millinewtons by multiplying by 1000. Pearson's examiners have reported that not converting milli-units before using an equation is a common cause of power of ten errors.

Mark scheme
  1. 1 mark

    conversions: 45 mT = 0.045 T and 6.0 cm = 0.060 m (1)

    both conversions are needed for MP1; accept 4.5 × 10⁻² T and 6.0 × 10⁻² m.

  2. 1 mark

    (substitution) (F =) 0.045 × 2.5 × 0.060 (1)

    allow ecf from their converted values.

  3. 1 mark

    6.75 / 6.8 (mN) (1)

    accept values that round to 6.8 (mN); An answer of 6.75 / 6.8 (mN) with no working scores 3 marks. 0.006 75 N or 6.75 × 10⁻³ N (correct, but not in mN) scores 2 marks; 6.75 or 6.8 multiplied by any other power of ten (e.g. 675 from using 45 and 6.0 without converting, or 0.675 from one unit not converted) scores 2 marks (power of ten error).

Question 4

4 marks

At a steelworks, scrap steel is melted in an electric arc furnace. While it is melting the steel, the furnace takes 62 MW of electrical power from a supply with a potential difference of 33 kV.

Calculate the current supplied to the furnace. Give your answer in kA to 2 significant figures.

Model answer

P = 62 MW = 6.2 × 10⁷ W and V = 33 kV = 3.3 × 10⁴ V
P = I × V, so I = P ÷ V = 6.2 × 10⁷ ÷ 3.3 × 10⁴ = 1880 A
I = 1.88 kA = 1.9 kA (2 significant figures)

Explanation

Rearrange P = I × V to I = P ÷ V, with the power in watts (mega means 10⁶) and the potential difference in volts (kilo means 10³). The current comes out in amperes and is changed to kiloamperes by dividing by 1000, then rounded: 1.88 to 2 significant figures is 1.9. Forgetting one of the prefixes gives an answer 1000 or 1 000 000 times too big or too small.

Mark scheme
  1. 1 mark

    conversions: 62 MW = 6.2 × 10⁷ W and 33 kV = 3.3 × 10⁴ V (1)

    both conversions are needed for MP1; accept 62 000 000 W and 33 000 V; accept a correct treatment of the prefixes without converting, e.g. 62 ÷ 33 = 1.88 with mega ÷ kilo = 10³ (so the answer is in kA).

  2. 1 mark

    (rearrangement and substitution) I = P ÷ V = 6.2 × 10⁷ ÷ 3.3 × 10⁴ (1)

    allow ecf from their converted values; V ÷ P is a wrong rearrangement and scores no further marks.

  3. 1 mark

    (I =) 1880 (A) / 1.88 (kA) (1)

    accept values that round to 1880 A or 1.88 kA, e.g. 1878.8 A; award full marks for 1.9 kA without working; 1880 A or 1.88 kA without working scores 3 marks; an answer whose only error is a prefix not converted, or converted with the wrong power of ten, loses MP1 only (e.g. 0.0019 kA scores 3 marks).

  4. 1 mark

    1.9 (kA) (1)

    MP4 is for the answer in kA correctly rounded to 2 significant figures; allow ecf for their value in kA with a power of ten error correctly rounded to 2 significant figures (e.g. 0.0019 kA), but not after a wrong rearrangement; 1900 A (2 significant figures but not in kA) does not score MP4, so it scores 3 marks; 1.88 kA does not score MP4.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.