Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

Resistance and series circuits

Practise 17 exam-style questions on Resistance and series circuits for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Three resistors of resistance 2 Ω, 3 Ω and 5 Ω are connected in series.

What is the total resistance of the three resistors?

Choose your answer.

  • A less than 2 Ω
  • B 3.3 Ω
  • C 10 Ω
  • D 30 Ω

Model answer

C - 10 Ω (2 + 3 + 5).

Explanation

For resistors in series, the total resistance is the sum of the individual resistances, because the charge has to pass through all of them. So the total is 2 + 3 + 5 = 10 Ω, which is more than any one of the resistors. Averaging or multiplying the values are common errors.

Mark scheme
  1. 1 mark

    C / 10 Ω (1)

    The only correct answer is C: the charge passes through each resistor in turn, so the resistances add up, 2 + 3 + 5 = 10 Ω. A is not correct because a net resistance less than the smallest resistor happens for resistors in parallel, not in series; B is not correct because it is the mean of the three resistances; D is not correct because it is the product of the resistances. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A 1.0 kΩ resistor and a 4.7 kΩ resistor are connected in series with a battery.

Explain why the potential difference across the 4.7 kΩ resistor is larger than the potential difference across the 1.0 kΩ resistor.

Model answer

The two resistors are in series, so the current is the same in both of them. Since V = I × R, with the same current the p.d. is proportional to the resistance, so the 4.7 kΩ resistor has 4.7 times the p.d. of the 1.0 kΩ resistor.

Explanation

In series the current is the same everywhere, so the p.d. across each resistor depends only on its resistance (V = I × R). The battery's p.d. is shared in the ratio of the resistances. Saying the current is larger in the larger resistor is a common error.

Mark scheme
  1. 1 mark

    the current is the same in both resistors (because they are in series) (1)

    An explanation linking the two points.

  2. 1 mark

    V = I × R, so (with the same current) the larger resistance has the larger p.d. / the p.d. is proportional to the resistance (1)

    Accept 'the p.d. across the 4.7 kΩ resistor is 4.7 times as large'. Accept 'more energy is transferred to each coulomb in the larger resistor'. Do not accept 'the larger resistor uses more voltage' with no reason.

Question 3

3 marks

A model railway controller contains a variable resistor. The variable resistor is connected in series with the motor of the train and a 12 V supply.

Explain how moving the slider of the variable resistor to increase its resistance changes the speed of the train.

Model answer

Increasing the resistance of the variable resistor increases the total resistance of the series circuit. The supply p.d. stays at 12 V, so the current in the circuit, and in the motor, decreases. With a smaller current, the motor turns more slowly, so the train slows down.

Explanation

For a fixed supply p.d., a larger total resistance means a smaller current (I = V ÷ R), and a smaller current makes the motor turn more slowly. This is how a variable resistor in series controls the current in a component. Answers that jump straight to 'the train slows down' miss the resistance and current steps.

Mark scheme
  1. 1 mark

    the total resistance of the circuit increases (1)

    An explanation linking the three points. Reject contradictory material (e.g. 'the resistance increases so the current increases').

  2. 1 mark

    so the current in the motor decreases (1)

    Accept 'the p.d. across the motor decreases (because the variable resistor takes a larger share of the 12 V)'.

  3. 1 mark

    so the motor turns more slowly / the train slows down (1)

    Accept 'less energy is transferred to the motor each second, so the train slows down'.

Question 4

4 marks

An LED is used as an indicator light. It is connected in series with a resistor R and a 9.0 V battery.

The LED works correctly when the current in it is 20 mA and the potential difference across it is 2.0 V.

Calculate the resistance of R needed for the LED to work correctly.

Model answer

p.d. across R = 9.0 − 2.0 = 7.0 V
The LED and R are in series, so the current in R = 20 mA = 0.020 A
R = V ÷ I = 7.0 ÷ 0.020
R = 350 Ω

Explanation

The battery's 9.0 V is shared: the LED needs 2.0 V, so R must have the other 7.0 V across it. The current in R is the same as in the LED, 0.020 A, so R = 7.0 ÷ 0.020 = 350 Ω. Using 9.0 V instead of 7.0 V is the most common error.

Mark scheme
  1. 1 mark

    (p.d. across R =) 9.0 − 2.0 = 7.0 (V) (1)

    An answer of 350 (Ω) with no working scores 4 marks.

  2. 1 mark

    (current in R =) 20 mA = 0.020 (A) (1)

    Accept the idea that the current in R is the same as in the LED because they are in series.

  3. 1 mark

    (R =) 7.0 ÷ 0.020 (1)

    Allow ecf from an incorrect p.d. or current.

  4. 1 mark

    350 (Ω) (1)

    0.35 (mA not converted), or 350 to any other power of ten, scores 3 marks. 450 Ω (9.0 ÷ 0.020) and 100 Ω (2.0 ÷ 0.020) score 1 mark each, for the current conversion.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.