Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

Changes of state, specific heat capacity and latent heat

Practise 18 exam-style questions on Changes of state, specific heat capacity and latent heat for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 18 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
18 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

These values are for water:
- specific latent heat of fusion = 334 000 J/kg
- specific latent heat of vaporisation = 2 260 000 J/kg
- specific heat capacity = 4200 J/kg °C

Which of these changes needs the most energy to be transferred to the water?

Use the equations
Q = m × L
ΔQ = m × c × Δθ

Choose your answer.

  • A 1 kg of ice at 0 °C to water
  • B 1 kg of water at 100 °C to steam
  • C 1 kg of water from 0 °C to 100 °C
  • D 1 kg of water at 0 °C to ice

Model answer

B - 1 kg of water at 100 °C to steam.

Explanation

Compare the energies: melting 1 kg of ice needs 334 000 J, heating 1 kg of water from 0 °C to 100 °C needs 1 × 4200 × 100 = 420 000 J, and boiling 1 kg of water needs 2 260 000 J - more than five times as much as heating it from freezing to boiling. Freezing is the reverse of melting, so energy is given out, not taken in. The latent heat of vaporisation is large because the particles must be separated completely to form a gas.

Mark scheme
  1. 1 mark

    B / 1 kg of water at 100 °C to steam (1)

    The only correct answer is B: turning 1 kg of water at 100 °C into steam needs Q = m × L = 1 × 2 260 000 = 2 260 000 J, far more than the other changes. A is not correct because melting 1 kg of ice needs only 1 × 334 000 = 334 000 J; C is not correct because heating 1 kg of water through 100 °C needs ΔQ = m × c × Δθ = 1 × 4200 × 100 = 420 000 J; D is not correct because when water freezes, energy (334 000 J) is transferred from the water to the surroundings, not to the water. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Pure tin melts at 232 °C. When 50 g of molten tin at 232 °C solidifies, it transfers 2950 J of energy to the surroundings.

Calculate the specific latent heat of fusion of tin.

Use the equation
Q = m × L

Model answer

m = 50 g = 0.050 kg
L = Q ÷ m = 2950 ÷ 0.050 = 59 000 J/kg

Explanation

Rearrange Q = m × L to L = Q ÷ m, with the mass in kilograms so that the answer is in J/kg. The energy transferred when 1 kg freezes is the same as the energy needed to melt 1 kg. Forgetting to convert 50 g into 0.050 kg gives an answer 1000 times too small.

Mark scheme
  1. 1 mark

    rearrangement and substitution: (L =) 2950 ÷ 0.050 (1)

    An answer of 59 000 (J/kg) with no working scores 2 marks.

  2. 1 mark

    evaluation: 59 000 (J/kg) (1)

    Accept 5.9 × 10⁴ J/kg. An answer with a power of ten error (e.g. 59, from using 50 g not converted to kg) scores 1 mark. 0.050 ÷ 2950 (inverted) scores 0.

Question 3

3 marks

A cast-iron frying pan has a mass of 1.2 kg. It is taken off the cooker at a temperature of 200 °C. As it cools, it transfers 81 000 J of energy to the surroundings.

The specific heat capacity of cast iron is 450 J/kg °C.

Calculate the final temperature of the pan.

Use the equation
ΔQ = m × c × Δθ

Model answer

Δθ = ΔQ ÷ (m × c) = 81 000 ÷ (1.2 × 450) = 81 000 ÷ 540 = 150 °C
The pan cools, so its final temperature = 200 - 150 = 50 °C

Explanation

Rearrange ΔQ = m × c × Δθ to find the change in temperature, then use it: the pan is cooling, so subtract the change from the starting temperature. The most common error is to give 150 °C, which is the change in temperature, not the final temperature.

Mark scheme
  1. 1 mark

    rearrangement and substitution: (Δθ =) 81 000 ÷ (1.2 × 450) (1)

    An answer of 50 (°C) with no working scores 3 marks. Accept Δθ = ΔQ ÷ (m × c) with the values substituted in either order.

  2. 1 mark

    evaluation: (Δθ =) 150 (°C) (1)

    An incorrect rearrangement, e.g. 81 000 × 1.2 × 450, is a wrong method and scores 0.

  3. 1 mark

    (final temperature =) 200 - 150 = 50 (°C) (1)

    Allow ecf from the student's Δθ. 150 °C given as the final temperature scores MP1 and MP2. 350 °C (adding the change) scores MP1 and MP2 only.

Question 4

4 marks

Steam from a kettle can cause a worse burn than the same mass of boiling water.

In a model of a burn:
- 1.0 g of steam at 100 °C condenses on the skin, and the water formed then cools to 37 °C
- 1.0 g of boiling water at 100 °C cools to 37 °C on the skin

specific latent heat of vaporisation of water = 2 260 000 J/kg
specific heat capacity of water = 4200 J/kg °C

Calculate how many times more energy the steam transfers to the skin than the boiling water does.

Use the equations
Q = m × L
ΔQ = m × c × Δθ

Model answer

Steam: energy released when it condenses = m × L = 0.0010 × 2 260 000 = 2260 J
The condensed water then cools from 100 °C to 37 °C: ΔQ = m × c × Δθ = 0.0010 × 4200 × 63 = 264.6 J
Total from the steam = 2260 + 264.6 = 2524.6 J
Boiling water: energy released = 264.6 J
ratio = 2524.6 ÷ 264.6 = 9.5
The steam transfers about 9.5 times as much energy to the skin.

Explanation

The steam transfers energy in two stages: its latent heat as it condenses, and then the energy given out as the condensed water cools, just like the boiling water. The latent heat is about eight and a half times as large as the cooling energy, which is why steam burns are so severe. The usual error is to forget the second stage for the steam.

Mark scheme
  1. 1 mark

    (energy from the steam condensing =) 0.0010 × 2 260 000 = 2260 (J) (1)

    An answer of 9.5 with no working scores 4 marks. The ratio does not depend on the mass, so allow MP1-MP3 for values found using the same mass consistently, e.g. 2 260 000 J for 1.0 kg.

  2. 1 mark

    (energy from water cooling from 100 °C to 37 °C =) 0.0010 × 4200 × 63 = 265 (J) (1)

    Accept 264.6 J.

  3. 1 mark

    (total energy from the steam =) 2260 + 265 = 2520 (J) (1)

    Accept 2524.6 J or 2525 J. Allow ecf from the student's values.

  4. 1 mark

    (ratio =) 2520 ÷ 265 = 9.5 (1)

    Accept values from 9.5 to 9.6, or 'about 10 times' with correct working. Allow ecf from the student's values. 2260 ÷ 265 = 8.5 (cooling of the condensed steam left out) scores MP1 and MP2 only.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.