Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

Density and the particle model

Practise 17 exam-style questions on Density and the particle model for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Leah wants to find the density of a small metal cube. She will work out the volume of the cube from the length of one side, which is about 1.5 cm.

Which instrument should she use to measure the length of the side most precisely?

Choose your answer.

  • A metre rule
  • B 30 cm ruler
  • C vernier caliper
  • D measuring cylinder

Model answer

C - vernier caliper.

Explanation

Precision depends on the resolution of the instrument compared with the size of what is measured. A ruler reads to 1 mm, which is about 7% of a 15 mm side, and the percentage uncertainty is about three times as large once the length is cubed to find the volume. A vernier or digital caliper reads to 0.1 mm or better, so the volume, and hence the density, is much more precise.

Mark scheme
  1. 1 mark

    C / vernier caliper (1)

    The only correct answer is C: a vernier caliper reads to 0.1 mm (a digital caliper to 0.01 mm), so a length of about 15 mm is measured with a much smaller uncertainty than with a ruler. A is not correct because a metre rule only reads to 1 mm, which is a large uncertainty in a 15 mm length. B is not correct because a 30 cm ruler also only reads to 1 mm. D is not correct because a measuring cylinder measures volume, not length. Accept the letter or the option, and the spelling 'calliper'. If more than one option is given, do not award the mark.

Question 2

2 marks

Ben uses a eureka can and a measuring cylinder to find the volume of a pebble, and a balance to find its mass. He then calculates the density of the pebble.

Some of the water that the pebble pushes out of the can stays in the spout and does not reach the measuring cylinder.

Explain the effect this has on the density that Ben calculates.

Model answer

The water left in the spout is not measured, so the volume Ben records is smaller than the true volume of the pebble. Density = mass ÷ volume, and the mass is correct, so dividing by a volume that is too small gives a density that is too large.

Explanation

Think about which measurement is affected and which way: here the volume is too small. Because volume is on the bottom of density = mass ÷ volume, a smaller volume gives a larger density. Saying only that the result is 'inaccurate' does not explain the effect.

Mark scheme
  1. 1 mark

    the volume measured / collected is smaller than the (true) volume of the pebble (1)

    An explanation linking two points. Accept 'the volume reading is too low'.

  2. 1 mark

    so the calculated density is too large / higher than the true value (because density = mass ÷ volume and the mass is correct) (1)

    Accept 'greater than it should be'. 'The density is wrong / inaccurate' does not score. A correct direction for the density ('too high') with no reason scores this mark only.

Question 3

3 marks

Sam wants to find the density of some olive oil. He has a beaker of the olive oil, an empty 100 cm³ measuring cylinder and a top-pan balance.

Describe how Sam could use this equipment to find the density of the olive oil.

Model answer

Sam puts the empty measuring cylinder on the balance and records its mass (or sets the balance to zero with the cylinder on it). He pours olive oil into the cylinder, close to the 100 cm³ mark, and reads the volume with his eye level with the bottom of the meniscus. He then measures the mass of the cylinder with the oil and subtracts the mass of the empty cylinder to find the mass of the oil. The density is the mass of the oil divided by its volume, in g/cm³ (multiplied by 1000 to give kg/m³). He could repeat this and calculate a mean.

Explanation

The density of a liquid needs the mass and the volume of the liquid itself. The mass of the oil is found by difference (or by setting the balance to zero with the empty cylinder on it), and the volume is read from the measuring cylinder at eye level. Using a large volume makes the percentage error in reading the scale smaller. Forgetting to remove the mass of the cylinder is the most common mistake.

Mark scheme
  1. 1 mark

    measure the mass of the empty measuring cylinder and then the mass of the cylinder with the oil in it; the difference is the mass of the oil / set the balance to zero with the empty cylinder on it, so that the reading with the oil in is the mass of the oil (1)

    A description including any three from the five points; max 3. Do not accept 'weigh the oil' with no way of leaving out the mass of the cylinder.

  2. 1 mark

    pour oil into the measuring cylinder and read the volume from its scale, with the eye level with the (bottom of the) meniscus (1)

    Accept 'read the volume at eye level'. The volume must come from the measuring cylinder: do not accept 'measure the volume with a ruler'.

  3. 1 mark

    density = mass ÷ volume (e.g. in g/cm³) (1)

    Accept ρ = m ÷ V. Accept 'multiply a density in g/cm³ by 1000 to give kg/m³'. Do not accept volume ÷ mass.

  4. 1 mark

    use a large volume of oil (e.g. close to 100 cm³) (1)

    Accept 'fill the cylinder nearly to the 100 cm³ mark'.

  5. 1 mark

    repeat and calculate a mean (1)

    Accept 'repeat with different volumes and use the gradient of a graph of mass against volume'. Ignore 'repeat' on its own with no mention of a mean or a graph.

Question 4

4 marks

Priya measures the density of air in a laboratory.
- She finds the mass of a strong glass flask full of air. The mass is 187.46 g.
- She uses a vacuum pump to remove all the air from the flask, and then closes the tap on the flask. The mass of the empty flask is 186.86 g.
- The volume inside the flask is 500 cm³.

Calculate the density of the air in kg/m³.

Model answer

mass of air = 187.46 - 186.86 = 0.60 g
density = mass ÷ volume = 0.60 ÷ 500 = 0.0012 g/cm³
0.0012 × 1000 = 1.2 kg/m³
(or 0.000 60 kg ÷ 0.000 500 m³ = 1.2 kg/m³)

Explanation

The mass of the air is the difference between the two balance readings, which is very small, so a balance reading to 0.01 g is needed. Dividing by the volume gives 0.0012 g/cm³; multiplying by 1000 converts this to 1.2 kg/m³, which is roughly 800 times less than the density of water. The usual errors are forgetting the conversion or using a whole flask reading as the mass of air.

Mark scheme
  1. 1 mark

    (mass of air =) 187.46 - 186.86 = 0.60 (g) (1)

    Award full marks for the correct answer without working. Accept 6.0 × 10⁻⁴ kg.

  2. 1 mark

    substitution: (density =) 0.60 ÷ 500 / 0.00060 ÷ 0.000500 (1)

    Allow ecf from the student's mass of air. Using 187.46 g or 186.86 g as the mass of air (the subtraction not done) scores MP2 only.

  3. 1 mark

    evaluation: 0.0012 (g/cm³) / 1.2 × 10⁻³ (g/cm³) (1)

    Award this mark for a correct value in any consistent unit, including the final answer of 1.2 kg/m³.

  4. 1 mark

    (density =) 1.2 (kg/m³) (1)

    An answer of 0.0012 not converted into kg/m³ is a unit-conversion error that loses this mark only: it scores MP1, MP2 and MP3. Any other power of ten error in the final answer (e.g. 1200 kg/m³) scores 3 marks.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.