Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

The motor effect

Practise 16 exam-style questions on The motor effect for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

For a current-carrying wire at 90° to a magnetic field,
F = B × I × l

The current in the wire is halved. The length of wire in the field is doubled. The magnetic flux density does not change.

What happens to the force on the wire?

Choose your answer.

  • A it is halved
  • B it doubles
  • C it stays the same
  • D it is four times bigger

Model answer

C - it stays the same.

Explanation

The force is proportional to each of B, I and l. Halving the current halves the force and doubling the length doubles it, so the two changes cancel out. Considering only one change gives A or B.

Mark scheme
  1. 1 mark

    C / it stays the same (1)

    The only correct answer is C: F is proportional to I × l, and (½ I) × (2 l) = I × l, so the force does not change. A is not correct because it only takes account of the current being halved; B is not correct because it only takes account of the length being doubled; D is not correct because the two changes cancel rather than multiply. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A straight wire passes between the poles of a magnet, at right angles to the page, so that you see it end-on. The north pole is on the left and the south pole is on the right. When there is a current in the wire, the force on the wire is towards the top of the page.

Deduce the direction of the current in the wire. Explain how you used Fleming's left-hand rule.

Model answer

The current is out of the page, towards the viewer. In Fleming's left-hand rule the first finger points along the field, from N to S, so to the right; the thumb points along the force, towards the top of the page. With the left hand held like this, the second finger, which shows the current, points out of the page.

Explanation

Fleming's left-hand rule can be used 'backwards': set the first finger along the field and the thumb along the force, and the second finger then gives the current. The field between the poles goes from N to S. The usual errors are using the right hand or mixing up which finger shows which quantity.

Mark scheme
  1. 1 mark

    out of the page / towards the viewer (1)

    accept 'towards me / towards you'. Do not accept 'up' or 'to the right'.

  2. 1 mark

    first finger pointing to the right (field from N to S) and thumb pointing up the page (force), so the second finger (current) points out of the page (1)

    Dependent on the first mark. The explanation must match each finger to the correct quantity: first finger = field, second finger = current, thumb = force (or motion).

Question 3

3 marks

A straight wire lies across a uniform magnetic field of magnetic flux density 85 mT, perpendicular to the field. 40 mm of the wire is in the field. The wire experiences a force of 0.017 N.

Calculate the current in the wire.

Use the equation
F = B × I × l

Model answer

B = 85 mT = 0.085 T and l = 40 mm = 0.040 m
F = B × I × l, so I = F ÷ (B × l)
I = 0.017 ÷ (0.085 × 0.040)
I = 5.0 A

Explanation

Convert to SI units first (1 mT = 0.001 T, 1 mm = 0.001 m), then rearrange F = B × I × l to I = F ÷ (B × l). Forgetting either conversion gives 0.005 A, which is wrong by a factor of 1000.

Mark scheme
  1. 1 mark

    conversion: 85 mT = 0.085 T and 40 mm = 0.040 m (1)

    Both conversions are needed for this mark; they may be seen in the substitution. An answer of 5.0 (A) with no working scores 3 marks.

  2. 1 mark

    rearrangement and substitution: (I =) 0.017 ÷ (0.085 × 0.040) (1)

    allow ecf from incorrect conversions. accept 0.017 = 0.085 × I × 0.040.

  3. 1 mark

    evaluation: 5.0 (A) (1)

    accept 5 A. An answer with a power of ten error from a missing or wrong conversion (e.g. 0.005 A, from 85 mT or 40 mm not converted, or 0.05 A, from using 4.0 (the length in cm) as the length) scores 2 marks. Multiplying instead of dividing (e.g. 0.017 × 0.085 × 0.040) is a wrong method and scores the conversion mark only.

Question 4

5 marks

A U-shaped magnet sits on a top-pan balance. A horizontal wire is clamped between the poles of the magnet, at right angles to the magnetic field, without touching the magnet. The length of wire in the field is 4.0 cm.

With no current in the wire, the balance reads 152.40 g.
With a current of 2.5 A in the wire, the balance reads 151.80 g.

The change in the reading is caused by the magnetic force.

Calculate the magnetic flux density between the poles of the magnet. Take g as 10 N/kg.

Use the equation
F = B × I × l

Model answer

Change in reading = 152.40 - 151.80 = 0.60 g = 0.00060 kg
Force = m × g = 0.00060 × 10 = 0.0060 N
l = 4.0 cm = 0.040 m
F = B × I × l, so B = F ÷ (I × l)
B = 0.0060 ÷ (2.5 × 0.040)
B = 0.060 T

Explanation

The balance reading changes because the wire exerts an equal and opposite force on the magnet, so the change in reading (0.60 g) gives the size of the magnetic force: 0.00060 kg × 10 N/kg = 0.0060 N. Then rearrange F = B × I × l with l in metres. The most common errors are using the whole reading instead of the change and forgetting to convert grams to kilograms.

Mark scheme
  1. 1 mark

    (change in reading =) 152.40 - 151.80 = 0.60 g = 0.00060 kg (1)

    accept 6.0 × 10⁻⁴ kg. An answer of 0.060 (T) with no working scores 5 marks.

  2. 1 mark

    (F = m × g =) 0.00060 × 10 = 0.0060 (N) (1)

    allow ecf from an incorrect mass, e.g. 0.60 × 10 = 6.0 N.

  3. 1 mark

    l = 4.0 cm = 0.040 m (1)

    May be seen in the substitution.

  4. 1 mark

    rearrangement and substitution: (B =) 0.0060 ÷ (2.5 × 0.040) (1)

    allow ecf from an incorrect force or length.

  5. 1 mark

    evaluation: 0.060 (T) (1)

    accept 0.06 T; accept 0.059 T (from g = 9.8 N/kg). An answer with a power of ten error from a missing conversion (e.g. 60 T from the mass in grams, or 0.00060 T from the length in cm) scores 4 marks. Using 152.40 g or 151.80 g (instead of the change) as the mass is a wrong method and scores only the length conversion mark.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.