Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Physics (Paper 2) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts of physics
Unit 8
Energy - forces doing work
Unit 9
Forces and their effects
Unit 10
Electricity and circuits
Unit 11
Static electricity
Unit 12
Magnetism and the motor effect
Unit 13
Electromagnetic induction
Unit 14
Particle model
Unit 15
Forces and matter
Avg
score:
–
Topics
done:
0/34

Charge, current and energy transferred

Practise 17 exam-style questions on Charge, current and energy transferred for Edexcel GCSE Physics (Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

While a remote-controlled toy car is running, a charge of 60 C passes through its motor and 432 J of energy is transferred to the motor.

What is the potential difference across the motor?

Choose your answer.

  • A 0.14 V
  • B 372 V
  • C 25 920 V
  • D 7.2 V

Model answer

D - 7.2 V.

Explanation

Rearrange E = Q × V to V = E ÷ Q: 432 J ÷ 60 C = 7.2 J per coulomb, which is 7.2 V because 1 V = 1 J/C. A potential difference tells you how much energy each coulomb transfers. Dividing the wrong way round or multiplying are the usual errors.

Mark scheme
  1. 1 mark

    D / 7.2 V (1)

    The only correct answer is D: energy transferred = charge × potential difference (E = Q × V), so V = E ÷ Q = 432 ÷ 60 = 7.2 V, which is 7.2 J transferred by each coulomb of charge. A is not correct because it divides the charge by the energy (60 ÷ 432); B is not correct because it subtracts the charge from the energy (432 − 60), which has no physical meaning; C is not correct because it multiplies the energy by the charge (432 × 60) instead of dividing. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

When the switch in a circuit is closed, the lamp in the circuit lights almost immediately.

The electrons in the copper wires drift along the wires at an average speed of less than 1 mm per second.

Explain why the lamp lights almost immediately, even though the electrons move so slowly.

Model answer

The copper wires and the lamp filament are already full of free electrons. When the switch is closed and the circuit is complete, the electrons all the way round the circuit, including the ones in the lamp, start to move at almost the same time, so there is a current in the lamp straight away.

Explanation

A current in a metal is a flow of electrons that are already in the wires. Closing the circuit makes electrons in every part of it start to move together, so the lamp does not have to wait for electrons from the battery to reach it. The idea that electrons rush from the battery to the lamp at high speed is a common misconception.

Mark scheme
  1. 1 mark

    the wires (and the lamp filament) are already full of (free) electrons (1)

    Accept 'the electrons are already in every part of the circuit'.

  2. 1 mark

    when the circuit is complete / the switch is closed, electrons all round the circuit, including those in the lamp, start to move at (almost) the same time (1)

    Accept 'the potential difference acts on the electrons in every part of the circuit at once'. Do not accept 'the electrons travel very fast / at the speed of light' or any answer in which electrons must travel from the battery to the lamp before it lights.

Question 3

3 marks

The current in a copper wire connected to a bicycle lamp is 0.40 A.

The charge on one electron is 1.6 × 10⁻¹⁹ C.

Calculate the number of electrons that pass a point in the wire in 1 minute.

Model answer

Charge passing in 1 minute: Q = I × t = 0.40 × 60 = 24 C
Number of electrons = 24 ÷ (1.6 × 10⁻¹⁹)
= 1.5 × 10²⁰ electrons

Explanation

Current is the rate of flow of charge, so in 60 s the charge passing a point is 0.40 × 60 = 24 C. Each electron carries 1.6 × 10⁻¹⁹ C, so the number of electrons is 24 ÷ (1.6 × 10⁻¹⁹) = 1.5 × 10²⁰. Common errors are forgetting the time (giving the number per second) and multiplying by the charge on an electron instead of dividing.

Mark scheme
  1. 1 mark

    (Q = I × t =) 0.40 × 60 = 24 (C) (1)

    Award full marks for the correct answer without working. Alternative method: 0.40 ÷ 1.6 × 10⁻¹⁹ = 2.5 × 10¹⁸ (electrons each second) for the first mark, then × 60 for the second mark. An answer of 2.5 × 10¹⁸ (the number in one second) with no further working scores 1 mark.

  2. 1 mark

    (number of electrons =) 24 ÷ 1.6 × 10⁻¹⁹ (1)

    Allow ecf from an incorrect charge. 3.84 × 10⁻¹⁸ (multiplying by the charge on an electron) does not score this mark.

  3. 1 mark

    1.5 × 10²⁰ (1)

    Accept standard form typed in any clear form, e.g. 1.5E20 or 1.5 times 10 to the power 20, or 150 000 000 000 000 000 000. 1.5 to any other power of ten scores 2 marks.

Question 4

4 marks

Dev switches on his torch, but the lamp does not light. The torch has a battery, a switch and a lamp connected in series.

Suggest two different faults that could stop the lamp lighting. For each fault, explain why there is no current in the lamp.

Model answer

The lamp's filament could be broken. This leaves a gap in the circuit, so the circuit is not complete and charge cannot flow round it, so there is no current.
The battery could be flat. Then there is no potential difference to make the charge flow, so even though the circuit is complete there is no current.

Explanation

There is a current only when a circuit is complete (closed) and contains a source of potential difference. Any break in the loop - a broken filament, switch, wire or connection - stops the current, and so does a flat battery. Each fault needs its own matching explanation; 'no electricity' is too vague.

Mark scheme
  1. 2 marks

    two different faults, from: the switch is broken / does not close properly ; the lamp (filament) is broken / the lamp has blown ; a wire is broken / a connection is loose ; the battery is flat / has run down / is missing (2)

    1 mark for each different fault, max 2. Ignore 'the battery is in the wrong way round' (a filament lamp lights whichever way round the battery is connected). Do not accept 'the switch is off' (he has switched it on).

  2. 2 marks

    an explanation for each fault: (broken switch, lamp, wire or connection) there is a gap / the circuit is not complete (closed), so charge / electrons cannot flow round it ; (flat or missing battery) there is no source of potential difference to make the charge flow (2)

    1 mark for each fault correctly explained, max 2. An explanation is credited only when it matches the fault it is given for. Accept 'no energy is transferred to the charges' for a flat battery. Do not accept 'no electricity' or 'no power' alone.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.