Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Combined Science (Foundation Biology Paper 2) Smart practice A mixed round aimed at your weak spots
Avg
score:
–
Topics
done:
0/28

Water uptake and transpiration rates

Practise 15 exam-style questions on Water uptake and transpiration rates for Edexcel GCSE Combined Science (Foundation Biology Paper 2). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 15 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
15 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

Dev set up a leafy shoot in a potometer on a bright windowsill. He then moved the potometer into a dark cupboard. After a few minutes, the air bubble almost stopped moving.

Which statement explains why?

Choose your answer.

  • A the shoot stopped respiring in the dark
  • B the xylem vessels closed in the dark
  • C most of the stomata closed in the dark
  • D water started to move down the xylem in the dark

Model answer

C - most of the stomata closed in the dark.

Explanation

A potometer measures how fast the shoot takes up water, and the shoot takes up water to replace the water it loses by transpiration. Light makes stomata open; in the dark most stomata close, so very little water vapour escapes and the bubble almost stops. Remember that plants respire all the time, not only in the dark or only in the light.

Mark scheme
  1. 1 mark

    C / most of the stomata closed in the dark

    The only correct answer is C: in the dark most of the stomata close, so very little water vapour can diffuse out of the leaves. Transpiration almost stops, so very little water is drawn up the xylem and the bubble almost stops moving. A is not correct because plant cells respire all the time, in the light and in the dark; B is not correct because xylem vessels are hollow tubes of dead cells, which cannot open or close; D is not correct because water is still drawn slowly up the xylem to replace the small amount of water lost: it does not move down the stem. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

Yusuf timed the air bubble in a potometer with a stopwatch. It took 90 seconds to travel 21 mm along the scale.

Calculate the rate of water uptake in mm per minute.

Use the equation:

rate = distance travelled by the bubble ÷ time taken

Model answer

time = 90 ÷ 60 = 1.5 minutes
rate = 21 ÷ 1.5
= 14 mm per minute

Explanation

The answer must be in mm per minute, so change the time into minutes first (90 seconds = 1.5 minutes), or work out the rate per second and multiply by 60. A common error is to divide 21 by 90, which gives the rate in mm per second (0.23), not in mm per minute.

Mark scheme
  1. 1 mark

    working: (90 seconds = 1.5 minutes, so rate =) 21 ÷ 1.5 / 21 ÷ 90 × 60; or a correct final answer of 14 mm per minute with no working

    An answer of 14 mm per minute with no working scores 2 marks. 21 ÷ 90 = 0.23 (the rate in mm per second: the time was not changed into minutes) scores 1 mark. 90 ÷ 21 = 4.3 or 21 × 1.5 = 31.5 (wrong methods) score 0.

  2. 1 mark

    evaluation: 14 (mm per minute)

    accept 14.0. Ignore units.

Question 3

2 marks

The scale on Chen's potometer is 60 mm long. Chen set the air bubble at the 0 mark at the start of the scale. The bubble then moved along the scale at 4.8 mm per minute.

Calculate how many minutes it will take for the bubble to reach the end of the scale.

Use the equation:

rate = distance ÷ time

Model answer

time = distance ÷ rate
= 60 ÷ 4.8
= 12.5 minutes

Explanation

Rearrange the equation so that time = distance moved ÷ rate. Multiplying 60 by 4.8, or dividing 4.8 by 60, are common errors. Check your answer: 4.8 mm per minute × 12.5 minutes = 60 mm.

Mark scheme
  1. 1 mark

    working: (time = distance ÷ rate =) 60 ÷ 4.8; or a correct final answer of 12.5 minutes with no working

    An answer of 12.5 minutes with no working scores 2 marks. accept 12 minutes 30 seconds. 60 × 4.8 = 288 or 4.8 ÷ 60 = 0.08 (wrong rearrangements) score 0. An answer of 12 or 13 with no working scores 0; 60 ÷ 4.8 shown and then rounded to 12 or 13 scores 1 mark.

  2. 1 mark

    evaluation: 12.5 (minutes)

    accept 12 minutes 30 seconds. Ignore units.

Question 4

4 marks

Isaac investigated the effect of temperature on the rate of water uptake by a leafy shoot.

He set up a potometer and took it to three places:
• a corridor at 12 °C
• the laboratory at 20 °C
• a greenhouse at 28 °C.

In each place, he started the stopwatch as soon as he arrived and recorded the distance the air bubble moved in 1 minute. He took one reading in each place.

Suggest two improvements to Isaac's method. Explain how each improvement would make his results better.

Model answer

Improvement 1: Do all the tests in the same place, with the same light intensity and still air, and change only the temperature (for example in a temperature-controlled room). Light intensity and air movement also affect the rate of water uptake, so this makes it a fair test in which only the temperature changes.
Improvement 2: Repeat the reading three times at each temperature and calculate a mean. Anomalous results can then be spotted and ignored, so the results are more repeatable.

Explanation

The corridor, laboratory and greenhouse will have different light intensities and air movement, as well as different temperatures, so Isaac cannot tell which factor caused any change. Other good improvements are to let the shoot adjust for a few minutes before timing, to time for longer so that the bubble moves further, and to repeat each reading. Each improvement needs a reason linked to it to get the second mark.

Mark scheme
  1. 2 marks

    two different improvements from: keep the light intensity and air movement the same in each test (change only the temperature) / wait for a few minutes (e.g. 5 minutes) in each place before starting the timing / time the bubble for longer (e.g. 5 minutes) / repeat the readings (at least three times) at each temperature / test more temperatures

    1 mark for each different improvement, max 2. For keeping light and air movement the same, accept do all the tests in one place where only the temperature is changed (e.g. a temperature-controlled room or cabinet) / use the same lamp at the same distance and no draughts. Ignore 'make it a fair test' or 'control the variables' with no variable named. Ignore 'use a more accurate stopwatch'.

  2. 2 marks

    a linked explanation for each improvement: light intensity and air movement also affect the rate, so only temperature changes (a fair test / valid results) / the shoot has time to adjust to the new conditions, so the rate is steady before measuring / the bubble moves further, so the measurement is more accurate (small errors in reading the scale or timing matter less) / a mean can be calculated and anomalies spotted, so the results are more repeatable / the pattern (trend) can be seen more clearly

    1 mark for each explanation that matches an improvement given, max 2. accept 'the stomata have time to open or close' for waiting; accept 'the shoot reaches the new temperature' for waiting; accept 'more reliable' for repeats with a mean. An explanation scores only if it is linked to an improvement credited in marking point 1. Ignore 'to make the results better' with no reason.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.