Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA Level 2 Further Maths (Calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Coordinate Geometry (2 dimensions only)
Unit 4
Calculus
Unit 5
Matrix Transformations
Unit 6
Geometry
Avg
score:
–
Topics
done:
0/43

Sketching curves with known maximum and minimum points

Practise 16 exam-style questions on Sketching curves with known maximum and minimum points for AQA Level 2 Further Maths (Calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A curve \(y = f(x)\) has
minimum points at \((-2, -15.2)\) and \((3, -2.7)\)
and
a maximum point at \((1, 3.7)\)
The curve has no other stationary points.

Write down the values of \(x\) for which \(f(x)\) is decreasing.

Give your answer as inequalities. Type ≤ as <= and ≥ as >=.

Model answer

Two minimum points with a maximum point between them, and no other stationary points: the curve is W-shaped.
The curve falls to \((-2, -15.2)\), rises to \((1, 3.7)\), falls to \((3, -2.7)\) and then rises.
\(f(x)\) is decreasing for \(x < -2\) and for \(1 < x < 3\)

Explanation

Between two neighbouring stationary points a curve is either increasing all the way or decreasing all the way: it decreases into a minimum and increases out of it. So the curve decreases before the first minimum and between the maximum and the second minimum. Common errors are giving the intervals where f is increasing, and joining the two intervals into −2 < x < 3.

Mark scheme
  1. 2 marks

    B2 for \(x < -2\) and \(1 < x < 3\)

    accept ≤ for < throughout, eg \(x \le -2\) and \(1 \le x \le 3\); accept 'or' for 'and'. B1 for one of the two intervals correct with no incorrect interval, or for both correct with one incorrect extra interval. \(-2 < x < 1\) or \(x > 3\) (where f is increasing) is B0, and so is \(-2 < x < 3\). A fully correct answer with no working scores full marks.

Question 2

3 marks

Here is a sketch of the curve \(y = ax^2 + bx + c\)
The curve has a maximum point at \((2.5, 9.25)\) and crosses the y-axis at \((0, 3)\).

Work out the values of \(a\), \(b\) and \(c\).

A sketch on a pair of axes (x across, y up) with no scale marked, the axes crossing at the origin O. It is marked "Not drawn accurately". The curve labelled "y = ax² + bx + c" is an upside-down U-shaped (∩-shaped) parabola: it meets the x-axis twice; these points cannot be read off, as the sketch has no scale; it crosses the y-axis at a point that cannot be read off, as the sketch has no scale; it has a maximum point, which cannot be read off, as the sketch has no scale. A dot at (2.5, 9.25) is labelled "(2.5, 9.25)". A dot at (0, 3) is labelled "(0, 3)".

Model answer

The curve crosses the y-axis at \((0, 3)\), so \(c = 3\)
\(\dfrac{dy}{dx} = 2ax + b = 0\) at \(x = 2.5\): \(5a + b = 0\), so \(b = -5a\)
The point \((2.5, 9.25)\) is on the curve: \(6.25a + 2.5b + 3 = 9.25\)
\(6.25a - 12.5a = 6.25\)
\(-6.25a = 6.25\), so \(a = -1\) and \(b = 5\)
\(a = -1\), \(b = 5\), \(c = 3\)

Explanation

The maximum point gives two facts: the gradient is zero at x = 2.5, and the point lies on the curve; the y-intercept gives c at once. Completing the square works equally well: y = a(x − 2.5)² + 9.25, then use (0, 3) to find a. A common error is to take a = 1, forgetting that a maximum point means the parabola opens downwards, so a is negative.

Mark scheme
  1. 1 mark

    B1 for \(c = 3\)

    from the y-intercept; may be awarded with no working

  2. 1 mark

    M1 for one correct equation in a and b, eg \(5a + b = 0\) or \(6.25a + 2.5b + 3 = 9.25\)

    \(5a + b = 0\) comes from \(\dfrac{dy}{dx} = 2ax + b = 0\) when \(x = 2.5\). Alternative method: \(y = a(x - 2.5)^2 + 9.25\) with (0, 3) substituted, eg \(3 = 6.25a + 9.25\)

  3. 1 mark

    A1 for \(a = -1\) and \(b = 5\)

    All three values correct with no working scores full marks; a or b correct and the other incorrect or missing with no working scores B1 (for c = 3) only.

Question 3

4 marks

\(y = x^3 - 4.5x^2 + 6x\)

Use calculus to work out the number of solutions of the equation \(x^3 - 4.5x^2 + 6x = 2.2\)
You must show your working.

Model answer

\(\dfrac{dy}{dx} = 3x^2 - 9x + 6 = 3(x - 1)(x - 2)\)
Stationary points at \(x = 1\) and \(x = 2\)
\(x = 1\): \(y = 1 - 4.5 + 6 = 2.5\); \(x = 2\): \(y = 8 - 18 + 12 = 2\)
\(\dfrac{d^2y}{dx^2} = 6x - 9\): −3 at \(x = 1\) (maximum) and 3 at \(x = 2\) (minimum)
The curve rises to \((1, 2.5)\), falls to \((2, 2)\) and rises again.
\(2 < 2.2 < 2.5\), so the line \(y = 2.2\) crosses the curve three times.
Number of solutions: 3

Explanation

The solutions are where the line y = 2.2 meets the curve; a line strictly between the minimum and maximum values of a cubic crosses it three times. AQA's examiners reported (8365/2 June 2022) that some students who differentiated a cubic thought the x-values of the turning points were the solutions of the equation; here x = 1 and x = 2 are not solutions. Another common error is to miss how close together 2, 2.2 and 2.5 are.

Mark scheme
  1. 1 mark

    M1 for \(\dfrac{dy}{dx} = 3x^2 - 9x + 6\)

    at least two terms correct

  2. 1 mark

    M1dep for \(3x^2 - 9x + 6 = 0\) and \(x = 1\) and \(x = 2\)

    oe eg \(3(x - 1)(x - 2) = 0\)

  3. 1 mark

    A1 for \((1, 2.5)\) and \((2, 2)\)

    both y-values: 2.5 when x = 1 and 2 when x = 2

  4. 1 mark

    A1 for 3 (solutions), with a reason, eg 2.2 is between the minimum value 2 and the maximum value 2.5

    the maximum must be identified as (1, 2.5) and the minimum as (2, 2), by the second derivative, the gradient either side, or the shape of a cubic with a positive x³ term (stated or shown on a sketch). The question says 'You must show your working': correct answer with no working scores 0, and solving the cubic on a calculator without the stationary points scores 0.

Question 4

5 marks

\(f(x) = 0.5x^3 + x^2 - 3x\)
The equation \(f(x) = k\), where \(k\) is a constant, has exactly one solution.

Use calculus to work out the possible values of \(k\).
Give the numbers in your answer to 2 decimal places.

The solutions of \(ax^2 + bx + c = 0\), where \(a\) ≠ 0, are \(x = \dfrac{-b \pm \sqrt{b^2 - 4ac}}{2a}\)

Give your answer as inequalities. Type ≤ as <= and ≥ as >=.

Model answer

\(f'(x) = 1.5x^2 + 2x - 3\)
At the stationary points \(1.5x^2 + 2x - 3 = 0\), so \(3x^2 + 4x - 6 = 0\)
\(x = \dfrac{-4 \pm \sqrt{16 + 72}}{6} = \dfrac{-4 \pm \sqrt{88}}{6}\), so \(x = 0.8968...\) or \(x = -2.2301...\)
\(f(0.8968...) = -1.5255...\) and \(f(-2.2301...) = 6.1181...\)
\(f''(x) = 3x + 2\): positive at \(x = 0.897...\) (minimum), negative at \(x = -2.230...\) (maximum)
The line \(y = k\) meets the curve exactly once when it is above the maximum or below the minimum.
\(k < -1.53\) or \(k > 6.12\)

Explanation

The solutions of f(x) = k are where the line y = k meets the curve. A positive cubic is met three times by lines strictly between its minimum and maximum values, twice at those values and once outside them. A common error is to give −1.53 < k < 6.12, which is the condition for three solutions.

Mark scheme
  1. 1 mark

    M1 for \(f'(x) = 1.5x^2 + 2x - 3\)

    at least two terms correct (exact coefficients; accept \(\dfrac{3}{2}x^2\))

  2. 1 mark

    M1dep for \(1.5x^2 + 2x - 3 = 0\) and a correct method to solve it, eg \(x = \dfrac{-2 \pm \sqrt{22}}{3}\)

    oe eg \(3x^2 + 4x - 6 = 0\) and \(\dfrac{-4 \pm \sqrt{88}}{6}\); or \(x = 0.897...\) and \(x = -2.230...\) [0.89, 0.90] and [−2.24, −2.22]

  3. 1 mark

    A1 for \(f(x) = -1.53\) [−1.535, −1.525] and \(f(x) = 6.12\) [6.115, 6.125] at the stationary points

    accept the exact values \(\dfrac{62 - 22\sqrt{22}}{27}\) and \(\dfrac{62 + 22\sqrt{22}}{27}\), or more accurate values in the ranges

  4. 1 mark

    M1 for identifying (−2.23, 6.12) as the maximum and (0.90, −1.53) as the minimum, or a statement or sketch showing that k must be above the maximum value or below the minimum value

    accept the coordinates in the ranges given above, or more accurate. eg \(f''(x) = 3x + 2\) negative at x = −2.23 and positive at x = 0.897, or a correct sketch of the positive cubic with both turning points marked

  5. 1 mark

    A1 for \(k < -1.53\) or \(k > 6.12\)

    dep on all four previous marks; accept the exact values; accept 'k < −1.53, k > 6.12'. \(-1.53 < k < 6.12\) (three solutions) is A0. Condone \(k \le -1.53\) or \(k \ge 6.12\) with these 2 decimal place values: −1.53 is below the minimum value (−1.5255...) and 6.12 is above the maximum value (6.1181...), so each still gives exactly one solution (AQA condones ≤ for < in such answers, eg 8365/2 June 2023 Q7(b)). With the exact values, ≤ and ≥ are A0, as there are exactly two solutions at the turning-point values. The question says 'Use calculus': a correct answer with no working, or found without calculus (eg from a graphical calculator), scores SC1 only (as AQA 8365/2 June 2023 Q9(c)).

  6. 1 mark

    SC1 for \(k < -1.53\) or \(k > 6.12\) with no calculus seen

    accept the critical values in the ranges [−1.535, −1.525] and [6.115, 6.125], or the exact values. Special case: award only when no other marks are scored; the response then scores 1 in total. max 5

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.