Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
AQA Level 2 Further Maths (Calculator) Smart practice A mixed round aimed at your weak spots
Unit 1
Number
Unit 2
Algebra
Unit 3
Coordinate Geometry (2 dimensions only)
Unit 4
Calculus
Unit 5
Matrix Transformations
Unit 6
Geometry
Avg
score:
–
Topics
done:
0/43

Pythagoras' theorem in 2D and 3D

Practise 17 exam-style questions on Pythagoras' theorem in 2D and 3D for AQA Level 2 Further Maths (Calculator). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 17 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
17 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

2 marks

A triangle has sides of length 6.5 cm, 7.2 cm and 9.8 cm.

Jaya says,
"This triangle is right-angled."

Is Jaya correct?
You must show your working.

Model answer

If the triangle were right-angled, the longest side (9.8 cm) would be the hypotenuse.
\(6.5^2 + 7.2^2 = 42.25 + 51.84 = 94.09\)
\(9.8^2 = 96.04\)
\(94.09 ≠ 96.04\), so the triangle is not right-angled. Jaya is not correct.

Explanation

The converse of Pythagoras' theorem: a triangle is right-angled exactly when the square of the longest side equals the sum of the squares of the other two. Here \(6.5^2 + 7.2^2 = 9.7^2\), so a right-angled triangle with these two sides would have hypotenuse 9.7 cm, not 9.8 cm (in fact the angle opposite 9.8 cm is slightly obtuse). Values this close must be compared exactly, not judged from a sketch.

Mark scheme
  1. 1 mark

    M1 for \(6.5^2 + 7.2^2 = 94.09\) and \(9.8^2 = 96.04\) oe

    Both values (or calculations) needed. oe eg \(\sqrt{6.5^2 + 7.2^2} = 9.7\), or \(9.8^2 - 7.2^2 = 44.2\) and \(6.5^2 = 42.25\)

  2. 1 mark

    A1 for 'No' (not correct) with a correct comparison, eg \(94.09 ≠ 96.04\) so the triangle is not right-angled

    Accept 'No, because the hypotenuse would have to be 9.7 cm'. 'No' with no working scores 0 (the question says 'You must show your working'). Testing a pair of sides that does not include 9.8 as the longest side is M0A0.

Question 2

3 marks

The diagram shows an isosceles triangle ABC.
\(AB = AC = 8.6\) cm
\(BC = 10.4\) cm

Work out the area of triangle ABC.
Give your answer to 3 significant figures.

Geometry diagram, marked "Not drawn accurately". Triangle ABC. Side AB is labelled 8.6 cm. Side AC is labelled 8.6 cm. Side BC is labelled 10.4 cm. AB and AC are each marked with one short dash (equal lengths).

Model answer

Let M be the midpoint of BC. AM is perpendicular to BC and \(BM = 5.2\) cm.
\(AM^2 = 8.6^2 - 5.2^2 = 73.96 - 27.04 = 46.92\)
\(AM = 6.8498...\) cm
Area \(= \dfrac{1}{2} \times 10.4 \times 6.8498... = 35.619...\)
\(= 35.6\) cm² (3 sf)

Explanation

In an isosceles triangle the line from the apex to the midpoint of the base is perpendicular to the base, so it splits the triangle into two right-angled triangles with hypotenuse 8.6 cm and base 5.2 cm. Pythagoras' theorem gives the height. Common errors are using the whole base, 10.4, in Pythagoras' theorem, or using 8.6 cm as the height.

Mark scheme
  1. 1 mark

    M1 for \(h^2 = 8.6^2 - 5.2^2\) or \(h = \sqrt{46.92}\) oe

    The perpendicular from A bisects BC. h = [6.84, 6.85].

  2. 1 mark

    M1dep for \(\dfrac{1}{2} \times 10.4 \times\) their \(h\)

    oe eg \(5.2 \times\) their h; accept h in [6.84, 6.85]

  3. 1 mark

    A1 for \(35.6\) [35.55, 35.65]

    Accept a more accurate value in the range, eg 35.62. A fully correct answer with no working scores full marks. Premature rounding giving a value outside the range is A0. Alternative: angle B from right-angled trigonometry (cos B = 5.2 ÷ 8.6) then \(\dfrac{1}{2} \times 8.6 \times 10.4 \times \sin B\).

Question 3

4 marks

The diagram shows two circles that touch at one point.
The larger circle has centre P and radius 7.5 cm.
The smaller circle has centre Q and radius 3.2 cm.
The straight line AB touches the larger circle at A and the smaller circle at B.

Work out the length of AB.
Give your answer to 3 significant figures.

Geometry diagram, marked "Not drawn accurately". A circle with centre P; A lies on it. Another circle with centre Q; B lies on it. Line segments AB, PA, QB and PQ are drawn. AB touches the circle with centre P at A (it is a tangent). AB touches the circle with centre Q at B (it is a tangent). PA is labelled 7.5 cm. QB is labelled 3.2 cm.

Model answer

The circles touch, so \(PQ = 7.5 + 3.2 = 10.7\) cm
PA and QB are both perpendicular to AB (a tangent is perpendicular to the radius), so PA is parallel to QB.
Draw a line from Q parallel to AB, meeting PA at R. Then ABQR is a rectangle, so \(QR = AB\) and \(PR = 7.5 - 3.2 = 4.3\) cm.
Triangle PRQ has a right angle at R:
\(AB^2 = QR^2 = 10.7^2 - 4.3^2 = 114.49 - 18.49 = 96\)
\(AB = \sqrt{96} = 9.797...\)
\(= 9.80\) cm (3 sf)

Explanation

Both radii meet the tangent AB at right angles, so PABQ is a right-angled trapezium. Drawing a line from Q parallel to AB cuts off a right-angled triangle whose hypotenuse is PQ (the sum of the radii, because the circles touch) and whose short side is the difference of the radii. Its third side equals AB. A common error is to use the sum of the radii as the short side as well.

Mark scheme
  1. 1 mark

    M1 for \(PQ = 7.5 + 3.2 = 10.7\)

    Exact value. The line of centres passes through the point where the circles touch. May be seen on the diagram.

  2. 1 mark

    M1 for a right-angled triangle with hypotenuse PQ and one side \(7.5 - 3.2 = 4.3\)

    PA and QB are perpendicular to AB (tangent perpendicular to radius), so they are parallel; a line from Q parallel to AB meets PA at a point 4.3 cm from P, and that line has the same length as AB. May be seen on the diagram.

  3. 1 mark

    M1dep for \(AB^2 = 10.7^2 - 4.3^2\) or \(AB = \sqrt{96}\) oe

    dep on both previous M marks

  4. 1 mark

    A1 for \(9.80\) [9.795, 9.805]

    Accept \(4\sqrt{6}\) or \(\sqrt{96}\), or a more accurate value in the range, eg 9.798; condone 9.8. A fully correct answer with no working scores full marks. 11.5 (from \(\sqrt{10.7^2 + 4.3^2}\)) or 6.93 (from \(10.7^2 - 7.5^2 - 3.2^2\)) is A0.

Question 4

4 marks

The diagram shows a rectangle ABCD.
P is a point inside the rectangle.

Prove that \(PA^2 + PC^2 = PB^2 + PD^2\)

Geometry diagram, marked "Not drawn accurately". Rectangle ABCD. Line segments PA, PB, PC and PD are drawn.

Model answer

Let the perpendicular distances from P to AB, BC, CD and DA be \(w\), \(x\), \(y\) and \(z\).
Each vertex makes a right-angled triangle with P and the feet of two perpendiculars, so by Pythagoras' theorem:
\(PA^2 = w^2 + z^2\)
\(PB^2 = w^2 + x^2\)
\(PC^2 = x^2 + y^2\)
\(PD^2 = y^2 + z^2\)
\(PA^2 + PC^2 = w^2 + x^2 + y^2 + z^2\)
\(PB^2 + PD^2 = w^2 + x^2 + y^2 + z^2\)
So \(PA^2 + PC^2 = PB^2 + PD^2\)

Explanation

Splitting each line from P to a corner into horizontal and vertical parts turns every length into the hypotenuse of a right-angled triangle. Each perpendicular distance then appears in exactly two of the four squares, once on each side of the equation, so both sides are the same sum. Showing it works for one position of P, such as the centre, is not a proof.

Mark scheme
  1. 1 mark

    M1 for introducing the perpendicular distances from P to the sides (eg \(w\) to AB, \(x\) to BC, \(y\) to CD, \(z\) to DA), or coordinates with P at \((p, q)\) and the rectangle with vertices \((0, 0)\), \((a, 0)\), \((a, b)\), \((0, b)\)

    May be shown on the diagram. Opposite sides of a rectangle are parallel, so the distances across the rectangle are w + y and x + z.

  2. 1 mark

    M1dep for one correct expression from Pythagoras' theorem, eg \(PA^2 = w^2 + z^2\) or \(PA^2 = p^2 + q^2\)

    With coordinates: \(PB^2 = (a - p)^2 + q^2\), \(PC^2 = (a - p)^2 + (b - q)^2\), \(PD^2 = p^2 + (b - q)^2\)

  3. 1 mark

    M1dep for all four expressions correct, eg \(PA^2 = w^2 + z^2\), \(PB^2 = w^2 + x^2\), \(PC^2 = x^2 + y^2\), \(PD^2 = y^2 + z^2\)

    oe

  4. 1 mark

    A1 for \(PA^2 + PC^2 = w^2 + x^2 + y^2 + z^2 = PB^2 + PD^2\), a complete proof with the conclusion stated

    With coordinates both sides equal \(p^2 + q^2 + (a - p)^2 + (b - q)^2\). An answer that only restates the result scores 0; every step must be shown; checking numerical values or a special position of P (eg the centre) scores 0.

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.