Level:
Correct: 0
Incorrect: 0
Marks: 0/0
Exam Practice
Course:
Topics:
Edexcel GCSE Biology (Paper 1) Smart practice A mixed round aimed at your weak spots
Unit 1
Key concepts in biology
Unit 2
Cells and control
Unit 3
Genetics
Unit 4
Natural selection and genetic modification
Unit 5
Health, disease and the development of medicines
Avg
score:
–
Topics
done:
0/38

Aseptic technique and testing antimicrobials

Practise 16 exam-style questions on Aseptic technique and testing antimicrobials for Edexcel GCSE Biology (Paper 1). Write your answer as you would in the exam and get it marked in seconds against the mark scheme, point by point, with the Study Helper on hand if you get stuck.

  • 16 questions
  • 1–6 marks each
  • Instant marking
  • No sign-up needed
16 questions, marked as you go

Sample questions with model answers

Here are 4 of the questions in this topic, each with a model answer, an explanation of why it earns the marks and the mark scheme an examiner would use.

Question 1

1 mark

A student measured the diameter, d, of a circular clear zone around a disc of antibiotic.

Which expression gives the area of the clear zone?

Choose your answer.

  • A π × d²
  • B 2 × π × d
  • C π × d ÷ 2
  • D π × (d ÷ 2)²

Model answer

D - π × (d ÷ 2)²

Explanation

The area of a circle is πr², and the radius is half the diameter, so area = π × (d ÷ 2)². Using the diameter instead of the radius is the most common error and gives an answer four times too big. The other options are not areas at all.

Mark scheme
  1. 1 mark

    D / π × (d ÷ 2)² (1)

    The only correct answer is D. A is not correct because it uses the diameter in place of the radius, giving an area four times too large; B is not correct because 2 × π × d is not the formula for the area of a circle (it is twice the circumference); C is not correct because π × d ÷ 2 is half the circumference, not an area. Accept the letter or the option. If more than one option is given, do not award the mark.

Question 2

2 marks

A student made extracts of thyme, sage and rosemary by crushing each plant in ethanol. She soaked a paper disc in each extract and let the ethanol evaporate. She then placed the discs on an agar plate covered with bacteria.

Suggest what the student should use as a control disc, and explain why.

Model answer

The control should be a paper disc soaked in ethanol only, with the ethanol left to evaporate in the same way. Ethanol can kill bacteria, so this shows whether the ethanol or the disc itself affects the growth of bacteria; any clear zone round the extract discs that is larger than round the control must then be caused by the plant extracts.

Explanation

A control should be identical to the test discs except for the factor being tested - the plant extract. Because the extracts were made in ethanol, which can kill bacteria, the control disc must be treated with ethanol too. A disc soaked in water would not show whether traces of ethanol caused the clear zones.

Mark scheme
  1. 1 mark

    a disc soaked in ethanol (only), with the ethanol allowed to evaporate (1)

    An answer linking the two points. accept a disc treated in the same way but with ethanol and no plant extract; do not accept a disc soaked in water or a dry disc for this mark.

  2. 1 mark

    to show whether the ethanol / the disc alone affects the growth of the bacteria, so any clear zone is caused by the plant extract (1)

    accept to compare with the extract discs, to show the extracts caused the clear zones; this mark can be awarded with a water or dry disc control if the reason is correct.

Question 3

3 marks

A paper disc of antibiotic has a diameter of 6 mm. After incubation, the clear zone around it, including the disc, had a diameter of 22 mm.

Calculate the area of clear agar around the disc, not including the area of the disc itself. Give your answer to 3 significant figures.

Model answer

Radius of clear zone = 22 ÷ 2 = 11 mm; radius of disc = 6 ÷ 2 = 3 mm
Area of clear agar = (π × 11²) − (π × 3²) = 380.13 − 28.27 = 351.86 mm²
= 352 mm² (3 significant figures)

Explanation

Find the area of the whole clear zone and subtract the area of the disc, using the radius (half the diameter) each time; π × (11² − 3²) = π × 112 is a quicker way. Subtracting the diameters or radii before squaring (π × 8²) is a common error. Give the final answer to 3 significant figures as asked.

Mark scheme
  1. 1 mark

    radius of clear zone = 11 (mm) and radius of disc = 3 (mm) (1)

    An answer of 352 mm² with no working scores 3 marks.

  2. 1 mark

    (π × 11²) − (π × 3²) / 380.1 − 28.3 / π × 112 (1)

    ecf from incorrect radii.

  3. 1 mark

    352 (mm²) (1)

    Must be given to 3 significant figures: 351.9 or 351.86 scores marking points 1 and 2 only. An answer of 380 (the area of the whole zone, not subtracting the disc) scores marking point 1 only. An answer of 1410 (diameters used as radii) scores marking point 2 only, by ecf.

Question 4

4 marks

A single colony of bacteria grew on an agar plate. When the plate had been incubated for 24 hours, the colony was circular with a diameter of 2.0 mm. At 72 hours, its diameter was 8.0 mm.

Calculate the mean rate of increase in the cross-sectional area of the colony between 24 hours and 72 hours, in mm² per day. Give your answer to 2 significant figures.

Model answer

Radius at 24 hours = 2.0 ÷ 2 = 1.0 mm; radius at 72 hours = 8.0 ÷ 2 = 4.0 mm
Area at 24 hours = π × 1.0² = 3.14 mm²
Area at 72 hours = π × 4.0² = 50.27 mm²
Increase in area = 50.27 − 3.14 = 47.13 mm²
Time = 72 − 24 = 48 hours = 2 days
Mean rate = 47.13 ÷ 2 = 23.6 = 24 mm² per day (2 significant figures)

Explanation

Find the cross-sectional area at each time with πr² (radius = half the diameter), subtract, then divide by the time in days (48 hours = 2 days). A common error is to work out the area from the change in diameter (π × 3²), which is not the change in area. Check the unit asked for: per day, not per hour.

Mark scheme
  1. 1 mark

    radii = 1.0 (mm) and 4.0 (mm) (1)

    An answer of 24 mm² per day with no working scores 4 marks. An answer of 0.98 mm² per hour (correct method, wrong time unit) scores marking points 1, 2 and 3.

  2. 1 mark

    areas = π × 1.0² = 3.14 (mm²) and π × 4.0² = 50.27 (mm²) (1)

    ecf from incorrect radii. accept 50.3 or 50.27.

  3. 1 mark

    increase in area = 50.27 − 3.14 = 47.1 (mm²) (1)

    ecf from their areas; accept 47.1 to 47.2; accept π × (4² − 1²) = 47.1. If the diameters are used as the radii (areas 12.6 and 201), award marking points 3 and 4 by ecf for 188 and 94. Working out one area from the change in diameter or radius (π × 3² = 28.3, giving 14 per day) is a wrong method: it scores marking point 1 at most (if both radii are seen).

  4. 1 mark

    47.1 ÷ 2 = 24 (mm² per day) (1)

    ecf from their increase in area divided by 2 days; must be 2 significant figures (23.6 or 23.56 not given to 2 significant figures scores marking points 1 to 3 only).

Ready to try the rest? Every answer you write is marked against the mark scheme, so you can see exactly where the marks are.

Study Helper Hints first, answers after you try

Stuck on this one? Ask for a hint and I’ll point you in the right direction, without giving the answer away. Once you’ve checked your answer, I’ll show you how the marks are awarded.